Heat mapping for district heating

If the UK wishes to decarbonise its energy supply, it should consider a wider uptake of district heating. Currently, district heating only accounts for 2% of the country’s total heat supply. This paper considers the initial stages of designing a district heating network, the energy mapping in the local area, using a case study of Darley Dale, England. Energy mapping techniques are used to estimate the local area energy demand, a basis on which the district heating network design will rely on. The areas in the case study that are found to be profitable for possible district heating and where the rest of the district heating design work should focus on are Matlock, Bakewell and Darley Dale. The results of the mapping technique presented in this paper are found to agree with heat mapping work carried out by the UK Government. The agreement between the two mapping techniques shows that the mapping technique outlined in this paper is accurate enough for use

Modeling and simulation of a novel sustainable ammonia production process from food waste and brown water

Global demand for both clean energy carriers and agricultural nutrients continues to grow rapidly, alongside increasing quantities of waste globally, interlinked challenges that may be addressed with interlinked solutions. We report on the potential efficiency and Greenhouse Gas (GHG) intensity of several configurations of a new, sustainability-driven ammonia (NH3) production processes to determine whether a waste-based process designed first around carbon dioxide (CO2) capture can compete with other available NH3 technologies. This is assessed via different scenarios: Two hydrogen generating options are paired with four CO2 fates. For either an anaerobic digestion-centered process or a two-stage dark fermentation coupled with anaerobic digestion process, the resultant CO2 may be captured and injected, sold to the marketplace, released directly in the atmosphere, or converted to urea in order to produce a green substitute for synthetic NH3. Modeled yields range from 47 t NH3 when the resultant CO2 is released or captured, or 3.8 t NH3 and 76.5 t urea when the system is designed to produce no unutilized CO2. Among the technologies assessed, NH3 production where CO2 is captured for anaerobic digestion-only is the most efficient for GHG emissions and water consumption, while the two-stage requires less energy on a fertilizer-N basis. GHG emissions for anaerobic digestion-only are approximately 8% lower than the two-stage. The best of the proposed technology configurations consumes about 41% less energy than water electrolysis coupled with Haber-Bosch and approximately 27% lower energy than Steam Methane Reforming (SMR) coupled with Haber-Bosch per kg NH3

Developing a triple helix approach for CO2 utilisation assessment

Assessment of the sustainability of CO2 utilisation technologies should encompass economic, environmental and social aspects. Though guidelines for economic and environmental assessment of CO2 utilisation (CDU) have been presented, a methodology for social assessment of CDU has not. Herewith, social impact assessment for CDU is systematically investigated, a methodological framework derived and examples of application given. Both process and deployment scenarios are found to be key factors in the assessment and the sourcing of raw material is observed to be a hotspot for social impacts within the assessed CDU technologies. This framework contributes a new aspect to the development of holistic sustainability assessment methodologies for CDU by enabling a triple helix to be created between life cycle assessment (LCA), techno-economic assessment (TEA) and social impact assessment (SIA). Therefore, the triple helix approach will enable trade-offs between environmental, economic and social impacts to be explored, ultimately enhancing effective decision making for CDU development and deployment

The life cycle environmental impacts of a novel sustainable ammonia production process from food waste and brown water

To replace existing high impact ammonia production technologies, a new sustainability-driven waste-based technology producing green ammonia with and without urea was devised using life cycle thinking and sustainable design principles, targeting efficiency, carbon emissions, water, and power use competitiveness. We have used life cycle assessment to determine whether cradle-to-gate, multiple configurations of the core waste-based processes integrating several carbon capture/utilization options can compete environmentally with other available ammonia technologies. Our waste-to-ammonia processes reduce potential impacts from abiotic depletion, human toxicity, and greenhouse gas (GHG) emissions relative to fossil-based and renewable technologies. Among the assessed technologies, coupling dark fermentation with anaerobic digestion and capturing CO2 for sequestration or later use is most efficient for GHGs, water, and energy, consuming 27% less energy and reducing GHGs by 98% compared to conventional ammonia. Water use is 38% lower than water electrolysis and GHGs are 94% below municipal waste incineration routes per kg NH3. Additionally, displacing conventional, high impact urea by integrating urea production from process CO2 decreases life cycle environmental impacts significantly despite increased energy demand. On a fertilizer-N basis, the ammonia + urea configuration without dark fermentation performs best on all categories included. Methane and ammonia leakage cause nearly all life cycle impacts, indicating that failing to prevent leakage undermines the effectiveness of new technologies such as these. Our results show that a green ammonia/ammonia + urea process family as designed here can reduce waste and prevent the release of additional CO2 from ammonia production while avoiding fossil-based alternatives and decreasing emissions from biogenic waste sources

A novel approach to ammonia synthesis from hydrogen sulfide

There are a number of shortcomings for currently-available technologies for ammonia production, such as carbon dioxide emissions and water consumption. We simulate a novel model for ammonia production from hydrogen sulfide through membrane technologies. The proposed production process decreases the need for external water and reduces the physical footprint of the plant. The required hydrogen comes from the separation of hydrogen sulfide by electrochemical membrane separation, while the required nitrogen is obtained from separating oxygen from air through an ion transport membrane. 10% of the hydrogen from the electrochemical membrane separation along with the separated oxygen from the ion transport membrane is sent to the solid oxide fuel cell for heat and power generation. This production process operates with a minimal number of processing units and in physical, kinetic, and thermal conditions in which a separation factor of ~99.99% can be attained

Sustainable ammonia production processes

Due to the important role of ammonia as a fertilizer in the agricultural industry and its promising prospects as an energy carrier, many studies have recently attempted to find the most environmentally benign, energy efficient, and economically viable production process for ammonia synthesis. The most commonly utilized ammonia production method is the Haber-Bosch process. The downside to this technology is the high greenhouse gas emissions, surpassing 2.16 kgCO2-eq/kg NH3 and high amounts of energy usage of over 30 GJ/tonne NH3 mainly due to the strict operational conditions at high temperature and pressure. The most widely adopted technology for sustainable hydrogen production used for ammonia synthesis is water electrolysis coupled with renewable technologies such as wind and solar. In general, a water electrolyzer requires a continuous supply of pretreated water with high purity levels for its operation. Moreover, for production of 1 tonne of hydrogen, 9 tonnes of water is required. Based on this data, for the production of the same amount of ammonia through water electrolysis, 233.6 million tonnes/yr of water is required. In this paper, a critical review of different sustainable hydrogen production processes and emerging technologies for sustainable ammonia synthesis along with a comparative life cycle assessment of various ammonia production methods has been carried out. We find that through the review of each of the studied technologies, either large amounts of GHG emissions are produced or high volumes of pretreated water is required or a combination of both these factors occur

Electron Transfer from Cyt b559 and Tyrosine-D to the S2 and S3 states of the water oxidizing complex in Photosystem II at Cryogenic Temperatures

The Mn4CaO5 cluster of photosystem II (PSII) catalyzes the oxidation of water to molecular oxygen through the light-driven redox S-cycle. The water oxidizing complex (WOC) forms a triad with Tyrosine(Z) and P-680, which mediates electrons from water towards the acceptor side of PSII. Under certain conditions two other redox-active components, Tyrosine(D) (Y-D) and Cytochrome b (559) (Cyt b (559)) can also interact with the S-states. In the present work we investigate the electron transfer from Cyt b (559) and Y-D to the S-2 and S-3 states at 195 K. First, Y-D (aEuro cent) and Cyt b (559) were chemically reduced. The S-2 and S-3 states were then achieved by application of one or two laser flashes, respectively, on samples stabilized in the S-1 state. EPR signals of the WOC (the S-2-state multiline signal, ML-S-2), Y-D (aEuro cent) and oxidized Cyt b (559) were simultaneously detected during a prolonged dark incubation at 195 K. During 163 days of incubation a large fraction of the S-2 population decayed to S-1 in the S-2 samples by following a single exponential decay. Differently, S-3 samples showed an initial increase in the ML-S-2 intensity (due to S-3 to S-2 conversion) and a subsequent slow decay due to S-2 to S-1 conversion. In both cases, only a minor oxidation of Y-D was observed. In contrast, the signal intensity of the oxidized Cyt b (559) showed a two-fold increase in both the S-2 and S-3 samples. The electron donation from Cyt b (559) was much more efficient to the S-2 state than to the S-3 state

Techno-economic assessment guidelines for CO2 utilization

Carbon Capture and Utilization (CCU) is an emerging technology field that can replace fossil carbon value chains, and that has a significant potential to achieve emissions mitigation or even “negative emissions”—however in many cases with challenging technology feasibility and economic viability. Further challenges arise in the decision making for CCU technology research, development, and deployment, in particular when allocating funding or time resources. No generally accepted techno-economic assessment (TEA) standard has evolved, and assessment studies often result in “apples vs. oranges” comparisons, a lack of transparency and a lack of comparability to other studies. A detailed guideline for systematic techno-economic (TEA) and life cycle assessment (LCA) for CCU technologies was developed; this paper shows a summarized version of the TEA guideline, which includes distinct and prioritized (shall and should) rules and which allows conducting TEA in parallel to LCA. The TEA guideline was developed in a co-operative and creative approach with roughly 50 international experts and is based on a systematic literature review as well as on existing best practices from TEA and LCA from the areas of industry, academia, and policy. To the best of our knowledge, this guideline is the first TEA framework with a focus on CCU technologies and the first that is designed to be conducted in parallel to LCA due to aligned vocabulary and assessment steps, systematically including technology maturity. Therefore, this work extends current literature, improving the design, implementation, and reporting approaches of TEA studies for CCU technologies. Overall, the application of this TEA guideline aims at improved comparability of TEA studies, leading to improved decision making and more efficient allocation of funds and time resources for the research, development, and deployment of CCU technologies

Techno-economic feasibility of selective CO2 capture processes from biogas streams using ionic liquids as physical absorbents

Biogas from anaerobic digestion of sewage sludge is a renewable resource with high energy content, which is composed mainly of CH4 (40-75 vol %) and CO2 (15-60 vol %). Other components, such as water (H2O, 5-10 vol %) and trace amounts of hydrogen sulfide and siloxanes, can also be present. A CH4-rich stream can be produced by removing the CO2 and other impurities so that the upgraded biomethane can be injected into the natural gas grid or used as a vehicle fuel. The main objective of this paper is to assess the technical and economic performance of biogas upgrading processes using ionic liquids that physically absorb CO2. The simulation methodology is based on the COSMO-SAC model as implemented in Aspen Plus. Three different ionic liquids, namely, 1-ethyl-3-methylimidazolium bis(trifluoromethyl)sulfonylimide, 1-hexyl-3-methylimidazoliumbis(trifluoromethyl)sulfonylimide, and trihexyl(tetradecyl)phosphonium bis(trifluoromethyl)sulfonylimide, are considered for CO2 capture in a pressure-swing regenerative absorption process. The simulation software Aspen Plus and Aspen Process Economic Analyzer is used to account for mass and energy balances as well as equipment cost. In all cases, the biogas upgrading plant consists of a multistage compressor for biogas compression, a packed absorption column for CO2 absorption, a flash evaporator for solvent regeneration, a centrifugal pump for solvent recirculation, a preabsorber solvent cooler, and a gas turbine for electricity recovery. The evaluated processes are compared in terms of energy efficiency, capital investment, and biomethane production costs. The overall plant efficiency ranges from 71 to 86%, and the biomethane production cost ranges from 9.18-11.32 per GJ (LHV). A sensitivity analysis is also performed to determine how several technical and economic parameters affect the biomethane production costs. The results of this study show that the simulation methodology developed can predict plant efficiencies and production costs of large scale CO2 capture processes using ionic liquids without having to rely on gas solubility experimental data

Refining human palaeodietary reconstruction using amino acid delta N-15 values of plants, animals and humans.

An established method of estimating the trophic level of an organism is through stable isotope analysis of its tissues and those of its diet. This method has been used in archaeology to reconstruct past human diet from the stable nitrogen isotope (d15N) values of human and herbivore bone collagen. However, this approach, using the 15N-enrichment of human bone collagen d15N values over associated herbivore bone collagen d15N values to predict the relative importance of animal protein, relies on the assumptions that: (i) the d15N values of plants consumed by humans and herbivores are identical, and (ii) the 15Nenrichment between diet and consumer is consistent. Bone collagen amino acid d15N values have the potential to tackle these uncertainties, as they constrain the factors influencing bone collagen d15N values. In this study, the d15N values of glutamic acid and phenylalanine in human and herbivore bone collagen isolates from Neolithic sites in Germany, Greece and Turkey were determined by gas chromatography-combustion-isotope ratio mass spectrometry. The fraction of animal protein in total dietary protein consumed by the humans was estimated by: (i) comparing bulk human and herbivore collagen d15N values, (ii) comparing bulk human and herbivore collagen and ancient charred cereal grain d15N values, (iii) comparing human bone collagen d15NGlutamic acid and d15NPhenylalanine values, and (iv) comparing d15NGlutamic acid values of human and herbivore bone collagen and estimated d15NGlutamic acid values of ancient charred cereal grains. Where determined cereal grain d15N values are higher than estimated herbivore forage values, estimates of animal protein consumption are significantly lower, emphasising the importance of the plant nitrogen contribution to human bone collagen. This study also highlights the need for further investigation into: (i) the D15NConsumer-Diet values of glutamic acid and phenylalanine in terrestrial ecosystems, and (ii) D15NGlutamic acid-Phenylalanine values of common plant foods in order to improve the accuracy and more widespread applicability of amino acid-based methods for palaeodietary reconstruction