324 research outputs found
Biotechnological Improvement in Timothy Breeding
Biotechnological improvements in timothy breeding by androgenic and somatic cell culture and molecular identification were achieved. The doubled haploid (DH) plants were obtained via anther and microspore culture. A series of factors which affect androgenic embryogenesis and green plant regeneration have been evaluated. The PG-96 induction media which sharply promote androgenic embryogenesis have been established. Over 400 DH plants of timothy were obtained. Timothy somatic callus induction was successfully established using immature inflorescences and seedling stems. Suspension cultures were initiated from friable nodule-forming callus. More than 100 regenerated green plants were obtained from somatic callus and suspension clumps. DNA-based fingerprinting technologies such as RAPD, AFLP and SSR will be used in molecular identification. Appropriate primers and PCR conditions have been tested. The electrophoresis gel showed that the PCR products were informative and polymorphic. The result demonstrates that methodology based on random-primed DNA amplification can be used for timothy identification
Design strategies to minimize waste
This research study is focused on obtaining waste minimization strategies that designers can apply to their projects. With a rapid increase in construction recently, the high production of waste produced is dumped in landfills after being used without segregating them with hazardous material or considering if the material can be re-used.
This paper considers how designers globally focus on environmentally responsible designs and the appropriate ways designers reduce material waste. This research will help understand what techniques designers can use in the name of environmentally sustainable design practices to practice waste minimization. The paper will consist of information about waste management strategies and the tools to assess the sustainable factors and explain the principles of using resources efficiently in the design stage; these factors are reviewed by describing how the designers can achieve these techniques in the design process. These factors are obtained with the help of survey responses and a literature review. Qualitative methods were used for the research. For analyzing the survey responses, descriptive analysis is chosen. This study is a step to create awareness for the designers to adopt and implement waste minimization strategies for a sustainable future
Integrating Simulink, OpenVX, and ROS for Model-Based Design of Embedded Vision Applications
OpenVX is increasingly gaining consensus as standard platform to develop portable, optimized and power-efficient embedded vision applications. Nevertheless, adopting OpenVX for rapid prototyping, early algorithm parametrization and validation of complex embedded applications is a very challenging task. This paper presents a comprehensive framework that integrates Simulink, OpenVX, and ROS for model-based design of embedded vision applications. The framework allows applying Matlab-Simulink for the model-based design, parametrization, and validation of computer vision applications. Then, it allows for the automatic synthesis of the application model into an OpenVX description for the hardware and constraints-aware application tuning. Finally, the methodology allows integrating the OpenVX application with Robot Operating System (ROS), which is the de-facto reference standard for developing robotic software applications. The OpenVX-ROS interface allows co-simulating and parametrizing the application by considering the actual robotic environment and the application reuse in any ROS-compliant system. Experimental results have been conducted with two real case studies: An application for digital image stabilization and the ORB descriptor for simultaneous localization and mapping (SLAM), which have been developed through Simulink and, then, automatically synthesized into OpenVX-VisionWorks code for an NVIDIA Jetson TX2 boar
Preliminary studies on the conservation of whole sorghum and corn plant and sugar corn stover for silage
The whole corn plant and sugar corn stover were ensiled in stacks covered with plastics and soil. Sorghum was ensiled in tower silo. The amounts of fodder ensiled were 2 500 kg, 3 100 kg and 1400 kg, respectively. All silages were chopped with a precision chopper and ensiled without preservatives. The feeding values of the silages were determined with sheep according to 2 X 3 X 3 Latin square design. Urea (0.3 % of the fresh weight) was added to the silages before feeding. An intense secondary fermentation was found in all silages. The possible causes for this were the soil contamination of the fodder during harvesting and the effluent remained in the stack silages. The secondary fermentation decreased the sugar content of the silages and increased the fermentation losses especially in the corn silage. However, the quality of the silages was fairly good. Urea decreased the palatability of the silages and it would be better to add the urea to the silages before the ensiling. The energy and DCP values of the silages were quite modest. There were 0.63, 0.72 and 0.69 f.u./kg silage DM in sorghum, corn and corn stover silages, respectively The corresponding values for DCP were 75, 62 and 86 g/kg silage DM (urea included)
Maize for silage II. The effect of urea and acid as preservative treament on rumen fermentations and on feeding values of silages
The rumen fermentations and N-balances of rumen fistulated sheep were studied on diets of silages treated with urea and acid preservative. The digestibilities and feeding values of the silages were also calculated. The experiment was performed according to 5 x 5 Latin-square design. The digestibilities were determined by total collection the collection period lasting seven days. The rumen samples were taken on the last two days during the collection periods before and 1.5, 3.0, 4.5 and 6.0 hours after feeding. Besides the silages the animals received mineral mixture and water ad libitum. Urea or acid treatment had no effect (P > 0.05) on the consumption of silage DM. The consumption ranged from 1.7 to 1.9 kg DM/100 kg liveweight. Urea did not have a clear effect on the VFA production in the rumen. It tended, however, to decrease the proportions of C3 and C4—C5 acids in the rumen. Acid preservative decreased the production of VFA and the proportion of C3-acid (P 0.05) were found between the energy values, which varied between 0,12—0.14 f.u./kg of silage. There were no differences in the N-balances of the animals on different diets. The balances were positive on all diets
On-Treatment Platelet Reactivity is a Predictor of Adverse Events in Peripheral Artery Disease Patients Undergoing Percutaneous Angioplasty
Objectives: Few data are available on the association between a different entity of platelet inhibition on antiplatelet treatment and clinical outcomes in patients with peripheral artery disease (PAD). The aim of this study was to evaluate the degree of on-treatment platelet reactivity, and its association with ischaemic and haemorrhagic adverse events at follow up in PAD patients undergoing percutaneous transluminal angioplasty (PTA). Methods: In this observational, prospective, single centre study, 177 consecutive patients with PAD undergoing PTA were enrolled, and treated with dual antiplatelet therapy with aspirin and a P2Y12 inhibitor. Platelet function was assessed on blood samples obtained within 24 h from PTA by light transmission aggregometry (LTA) using arachidonic acid (AA) and adenosine diphosphate (ADP) as agonists of platelet aggregation. High on-treatment platelet reactivity (HPR) was defined by LTA ≥ 20% if induced by AA, and LTA ≥ 70% if induced by ADP. Follow up was performed to record outcomes (death, major amputation, target vessel re-intervention, acute myocardial infarction and/or myocardial revascularisation, stroke/TIA, and bleeding). Results: HPR by AA and HPR by ADP were found in 45% and 32% of patients, respectively. During follow up (median duration 23 months) 23 deaths (13%) were recorded; 27 patients (17.5%) underwent target limb revascularisation (TLR), two (1.3%) amputation, and six (3.9%) myocardial revascularisation. Twenty-four patients (15.6%) experienced minor bleeding. On multivariable analysis, HPR by AA and HPR by ADP were independent predictors of death [HR 3.8 (1.2–11.7), p =.023 and HR 4.8 (1.6–14.5), p =.006, respectively]. The median value of LTA by ADP was significantly lower in patients with bleeding complications than in those without [26.5% (22–39.2) vs. 62% (44.5–74), p <.001). LTA by ADP ≤ 41% was independently associated with bleeding HR 14.6 (2.6–24.0), p =.001] on multivariable analysis. Conclusions: In this study a high prevalence of on-clopidogrel and aspirin high platelet reactivity was found, which was significantly associated with the risk of death. Conversely, a low on-clopidogrel platelet reactivity was associated with a higher risk of bleeding. These results document that the entity of platelet inhibition is associated with both thrombotic and bleeding complications in PAD patients
Recommended from our members
Loss of CD147 results in impaired epithelial cell differentiation and malformation of the meibomian gland
Meibomian gland dysfunction is a leading cause of ocular surface disease. However, little is known about the regulatory processes that control the development and maintenance of this sebaceous gland. Here, we identify a novel function for CD147, a transmembrane protein that promotes tissue remodeling through induction of matrix metalloproteinases, in regulating meibocyte differentiation and activity. We found that CD147 localized along basal cells and within discrete membrane domains of differentiated meibocytes in glandular acini containing gelatinolytic activity. Induction of meibocyte differentiation in vitro promoted CD147 clustering and MMP9 secretion, whereas RNAi-mediated abrogation of CD147 impaired MMP9 secretion, concomitant with a reduction in the number of proliferative cells and cytoplasmic lipids. Meibomian glands of CD147 knockout mice had a lower number of acini in both the superior and inferior tarsal plates of the eyelids, and were characterized by loss of lipid-filled meibocytes compared with control mice. Together, our data provide evidence showing that gelatinolytic activity in meibocytes is dependent on CD147, and supports a role for CD147 in maintaining the normal development and function of the meibomian gland
Recommended from our members
Loss of CD147 results in impaired epithelial cell differentiation and malformation of the meibomian gland
Meibomian gland dysfunction is a leading cause of ocular surface disease. However, little is known about the regulatory processes that control the development and maintenance of this sebaceous gland. Here, we identify a novel function for CD147, a transmembrane protein that promotes tissue remodeling through induction of matrix metalloproteinases, in regulating meibocyte differentiation and activity. We found that CD147 localized along basal cells and within discrete membrane domains of differentiated meibocytes in glandular acini containing gelatinolytic activity. Induction of meibocyte differentiation in vitro promoted CD147 clustering and MMP9 secretion, whereas RNAi-mediated abrogation of CD147 impaired MMP9 secretion, concomitant with a reduction in the number of proliferative cells and cytoplasmic lipids. Meibomian glands of CD147 knockout mice had a lower number of acini in both the superior and inferior tarsal plates of the eyelids, and were characterized by loss of lipid-filled meibocytes compared with control mice. Together, our data provide evidence showing that gelatinolytic activity in meibocytes is dependent on CD147, and supports a role for CD147 in maintaining the normal development and function of the meibomian gland
Midterm results on a new self-expandable covered stent combined with branched stent grafts: Insights from a multicenter Italian registry
Objective: To investigate the technical periprocedural and midterm outcomes of endovascular repairs with multibranched endovascular repair or iliac branch devices combined with a new self-expanding covered stent. Methods: The COvera in BRAnch registry is a physician-initiated, multicenter, ambispective, observational registry (ClinicalTrials.gov Identifier: NCT04598802) enrolling patients receiving a multibranched endovascular repair or iliac branch devices procedure mated with Bard Covera Plus (Tempe, AZ) covered stent, designed to evaluate the outcomes of the covered stent mated with patient-specific and off-the-shelf branched stent graft. Primary end points were technical success, branch instability, and freedom from aortic and branch-related reintervention within 30 days and at follow-up. Preoperative characteristics, comorbidities, and outcomes definitions were graded according to the Society for Vascular Surgery reporting standards. Results: Two hundred eighty-four patients (76 years; range, 70-80 years; 79% males) in 24 centers were enrolled for a total of 708 target vessels treated. The covered stents were mated with an off-the-shelf graft in 556 vessels (79%) and a custom-made graft in 152 (21%). Three hundred seven adjunctive relining stents in 277 vessels (39%) were deployed, of which 116 (38%) were proximal, 66 (21%) intrastent, and 125 (41%) distal. Adjunctive relining stent placement was more frequent when landing in a vessel branch instead of the main trunk (59% vs 39%; P = .031), performing a percutaneous access (49% vs 35%; P < .001), using a stent with a diameter of 8 mm or greater (44% vs 36%; P = .032) and a length of 80 mm or greater (65% vs 55%; P = .005), when a post-dilatation was not performed (45% vs 29%; P < .001) and when an inner branch configuration was used (55% vs 35%; P < .001). Perioperative technical bridging success was 98%. Eight patients (3%) died in the perioperative period. Two deaths (1%) were associated with renal branch occlusion followed by acute kidney injury and paraplegia. Follow-up data were available for 638 vessels (90%) at a median of 32 months (Q1, Q3, 21, 46). Branch instability was reported in 1% of branches. Forty-six patients (17%) died during follow-up, nine (3%) of them owing to aortic-related causes. Primary patency rates at 1, 2, and 3 years were 99% (581/587), 99% (404/411), and 97% (272/279), respectively. Branch instability was associated with patient-specific devices (9% vs 4%; P = .014) and intrastent adjunctive stent placement (12% vs 2%; P = .003), especially when a bare metal balloon-expandable stent was used (25% vs 3%; P < .001). Conclusions: The use of this new self-expanding covered stent mated with branched endografts proved to be safe and feasible with high technical procedural success rates. Low rates of branch instability were observed at midterm follow-up. Comparative studies with other commercially available covered stents are warranted
- …