9,756 research outputs found
Normal modes in an overmoded circular waveguide coated with lossy material
The normal modes in an overmoded waveguide coated with a lossy material are analyzed, particularly for their attenuation properties as a function of coating material, layer thickness, and frequency. When the coating material is not too lossy, the low-order modes are highly attenuated even with a thin layer of coating. This coated guide serves as a mode suppressor of the low-order modes, which can be particularly useful for reducing the radar cross section (RCS) of a cavity structure such as a jet inlet. When the coating material is very lossy, low-order modes fall into two distinct groups: highly and lowly attenuated modes. However, as a/lambda (a = radius of the cylinder; lambda = the free-space wavelength) increases, the separation between these two groups becomes less distinctive. The attenuation constants of most of the low-order modes become small, and decrease as a function of lambda sup 2/a sup 3
Long term changes in cosmic ray diurnal variations observed by ion chambers in Hong Kong and Japan
Yearly average solar diurnal variations of cosmic ray ion chamber data are inspected from a view point of the eleven and the 22 year solar activity cycle modulations. Ion chamber data and neutron data from various stations are added. From an inspection of observed data, a simple approximation that the 11 year and the 22 year variations of the solar diurnal variation are along 18-hour and 12-hour axes, respectively is proposed. The 18-hour component of diurnal variation in the 11 year cycle increases toward the solar active years. The 12-hour component is enhanced when the solar general magnetic field is parallel to the rotation vector, and is almost zero for the other state. The transition occurs when the amplitude of the 18-hour component is greater owing to the transition of the field during the maximum phase of solar activity. The 22 year shift is consistent with the drift modulation model in heliosphere
Absorption characteristics of a quantum dot array induced intermediate band: implications for solar cell design
We present a theoretical study of the electronic and absorption properties of the intermediate band (IB) formed by a three dimensional structure of InAs/GaAs quantum dots (QDs) arranged in a periodic array. Analysis of the electronic and absorption structures suggests that the most promising design for an IB solar cell material, which will exhibit its own quasi-Fermi level, is to employ small QDs (~6–12 nm QD lateral size). The use of larger QDs leads to extension of the absorption spectra into a longer wavelength region but does not provide a separate IB in the forbidden energy gap
Burst size distributions in the digitized data of the ion chambers t Mt. Norikura and sea level stations
A practical and simple method for burst rejection is applied to the digitized data of cosmic ray ion chambers at Mt. Norikura, Tokyo and Kochi. As a result of burst rejection, the burst size frequency distributions in the digitized data at mountain altitude and sea level ion chambers is obtained. Results show that there are no significant differences between the digital and analog data processing in burst rejection
Numerical methods for analyzing electromagnetic scattering
Numerical methods to analyze electromagnetic scattering are presented. The dispersions and attenuations of the normal modes in a circular waveguide coated with lossy material were completely analyzed. The radar cross section (RCS) from a circular waveguide coated with lossy material was calculated. The following is observed: (1) the interior irradiation contributes to the RCS much more than does the rim diffraction; (2) at low frequency, the RCS from the circular waveguide terminated by a perfect electric conductor (PEC) can be reduced more than 13 dB down with a coating thickness less than 1% of the radius using the best lossy material available in a 6 radius-long cylinder; (3) at high frequency, a modal separation between the highly attenuated and the lowly attenuated modes is evident if the coating material is too lossy, however, a large RCS reduction can be achieved for a small incident angle with a thin layer of coating. It is found that the waveguide coated with a lossy magnetic material can be used as a substitute for a corrugated waveguide to produce a circularly polarized radiation yield
Electronic bandstructure and optical gain of lattice matched III-V dilute nitride bismide quantum wells for 1.55 m optical communication systems
Dilute nitride bismide GaNBiAs is a potential semiconductor alloy for near-
and mid-infrared applications, particularly in 1.55 m optical
communication systems. Incorporating dilute amounts of Bismuth (Bi) into GaAs
reduces the effective bandgap rapidly, while significantly increasing the
spin-orbit-splitting energy. Additional incorporation of dilute amounts of
Nitrogen (N) helps to attain lattice matching with GaAs, while providing a
route for flexible bandgap tuning. Here we present a study of the electronic
bandstructure and optical gain of the lattice matched
GaNBiAs/GaAs quaternary alloy quantum well (QW) based on the
16-band kp model. We have taken into consideration the interactions
between the N and Bi impurity states with the host material based on the band
anticrossing (BAC) and valence band anticrossing (VBAC) model. The optical gain
calculation is based on the density matrix theory. We have considered different
lattice matched GaNBiAs QW cases and studied their energy dispersion curves,
optical gain spectrum, maximum optical gain and differential gain; and compared
their performances based on these factors. The thickness and composition of
these QWs were varied in order to keep the emission peak fixed at 1.55 m.
The well thickness has an effect on the spectral width of the gain curves. On
the other hand, a variation in the injection carrier density has different
effects on the maximum gain and differential gain of QWs of varying
thicknesses. Among the cases studied, we found that the 6.3 nm thick
GaNBiAs lattice matched QW was most suited for 1.55
m (0.8 eV) GaAs-based photonic applications.Comment: Accepted in AIP Journal of Applied Physic
Numerical methods for analyzing electromagnetic scattering
Attenuation properties of the normal modes in an overmoded waveguide coated with a lossy material were analyzed. It is found that the low-order modes, can be significantly attenuated even with a thin layer of coating if the coating material is not too lossy. A thinner layer of coating is required for large attenuation of the low-order modes if the coating material is magnetic rather than dielectric. The Radar Cross Section (RCS) from an uncoated circular guide terminated by a perfect electric conductor was calculated and compared with available experimental data. It is confirmed that the interior irradiation contributes to the RCS. The equivalent-current method based on the geometrical theory of diffraction (GTD) was chosen for the calculation of the contribution from the rim diffraction. The RCS reduction from a coated circular guide terminated by a PEC are planned schemes for the experiments are included. The waveguide coated with a lossy magnetic material is suggested as a substitute for the corrugated waveguide
Wave attenuation and mode dispersion in a waveguide coated with lossy dielectric material
The modal attenuation constants in a cylindrical waveguide coated with a lossy dielectric material are studied as functions of frequency, dielectric constant, and thickness of the dielectric layer. A dielectric material best suited for a large attenuation is suggested. Using Kirchhoff's approximation, the field attenuation in a coated waveguide which is illuminated by a normally incident plane wave is also studied. For a circular guide which has a diameter of two wavelengths and is coated with a thin lossy dielectric layer (omega sub r = 9.1 - j2.3, thickness = 3% of the radius), a 3 dB attenuation is achieved within 16 diameters
- …