A case study on the seismic performance of earth dams

The seismic non-linear behaviour of earth dams is investigated by using a well-documented case study and employing advanced static and dynamic coupled-consolidation finite-element analysis. The static part of the analysis considers the layered construction, reservoir impoundment and consolidation, whereas the dynamic part considers the response of the dam to two earthquakes of different magnitude, duration and frequency content. The results of the analysis are compared with the recorded response of the dam and exhibit a generally good agreement. The effects of the narrow canyon geometry, the reservoir impoundment and the elasto-plastic soil behaviour on the seismic dam behaviour are investigated. Finally the implications of the adopted constitutive modelling assumptions on the predicted response are discussed

Impact of foundation layer characteristics on the seismic response of a tailings dam

The foundation layer thickness and stiffness impact the site response by influencing the fundamental frequencies and vibration modes in soil structure interaction (SSI) problems. From a practical perspective, the geotechnical characterisation of earthfill dams is typically focused on the borrow materials comprising the dam, while the foundation materials are often under-characterised, with the depth to the bedrock commonly only approximately estimated. In the seismic response of dams, these unknowns may also impact the deformation patterns affecting the overall stability of the dam. A back-analysis of seismic recorded data for an existing tailings sand dam is performed, to determine the thickness and stiffness of the soil foundation layer by finite element analysis. A cyclic non-linear model (CNL) is employed in the Finite Element analyses which consider different depths to bedrock and soil stiffness profiles. The results suggest satisfactory agreement with the recorded data in terms of acceleration response spectra and amplification ratios and highlight the impact of the foundation layer characteristics on the overall dam response

Stabilisation of excavated slopes in strain softening materials with piles

The use of a row of discrete vertical piles is an established method, successfully used to remediate failure of existing slopes and to stabilise potentially unstable slopes created by widening transport corridors. This paper challenges the assumptions made in current design procedures for these piles, which treat the pile only as an additional force or moment and simplify soil–pile interaction. Two-dimensional plane-strain finite-element analyses were performed to simulate the excavation of a slope in a stiff clay and the interaction of vertical piles within the slope. A non-local strain-softening model was employed for the stiff clay to reduce the mesh dependency of the solution. An extensive parametric study was performed to systematically examine the impact of pile position, dimensions (length and diameter) and time of pile construction on the stability of a cutting in London Clay, which was chosen as a representative strain-softening material. A variety of different failure mechanisms were identified, depending on pile location, dimensions and time of construction. The variability of the pile and slope interaction that was modelled suggests that an oversimplification during design could miss the critical failure mechanism or provide a conservative stabilisation solution. Given the prevalence of stiff clay slopes in the UK, increased capacity requirements of transport infrastructure and the age of slopes in this material, an informed and more realistic design of stabilisation piles will become increasingly necessary

Numerical and analytical investigation of compressional wave propagation in saturated soils

In geotechnical earthquake engineering, wave propagation plays a fundamental role in engineering applications related to the dynamic response of geotechnical structures and to site response analysis. However, current engineering practice is primarily concentrated on the investigation of shear wave propagation and the corresponding site response only to the horizontal components of the ground motion. Due to the repeated recent observations of strong vertical ground motions and compressional damage of engineering structures, there is an increasing need to carry out a comprehensive investigation of vertical site response and the associated compressional wave propagation, particularly when performing the seismic design for critical structures (e.g. nuclear power plants and high dams). Therefore, in this paper, the compressional wave propagation mechanism in saturated soils is investigated by employing hydro-mechanically (HM) coupled analytical and numerical methods. A HM analytical solution for compressional wave propagation is first studied based on Biot’s theory, which shows the existence of two types of compressional waves (fast and slow waves) and indicates that their characteristics (i.e. wave dispersion and attenuation) are highly dependent on some key geotechnical and seismic parameters (i.e. the permeability, soil stiffness and loading frequency). The subsequent HM Finite Element (FE) study reproduces the duality of compressional waves and identifies the dominant permeability ranges for the existence of the two waves. In particular the existence of the slow compression wave is observed for a range of permeability and loading frequency that is relevant for geotechnical earthquake engineering applications. In order to account for the effects of soil permeability on compressional dynamic soil behaviour and soil properties (i.e. P-wave velocities and damping ratios), the coupled consolidation analysis is therefore recommended as the only tool capable of accurately simulating the dynamic response of geotechnical structures to vertical ground motion at intermediate transient states between undrained and drained conditions