1,312 research outputs found
Distribution system simulator
In a series of tests performed under the Department of Energy auspices, power line carrier propagation was observed to be anomalous under certain circumstances. To investigate the cause, a distribution system simulator was constructed. The simulator was a physical simulator that accurately represented the distribution system from below power frequency to above 50 kHz. Effects such as phase-to-phase coupling and skin effect were modeled. Construction details of the simulator, and experimental results from its use are presented
Recommended from our members
White coat hypertension is associated with increased small vessel disease in the brain
Objective:
Small vessel disease, as measured by white matter hyperintensity (WMH) in the brain, is known to be associated with increased stroke risk and cognitive impairment. This study explored the relationship between WMH on computerised tomography (CT) and white coat hypertension/effect (WCH/E) in patients with recent transient ischaemic attack (TIA) or lacunar stroke (LS).
Design and method:
Ninety-six patients recruited for the ASIST trial (Arterial Stiffness in Lacunar Stroke and TIA) underwent measurement of clinic blood pressure (BP) and ambulatory BP monitoring (APBM) within two weeks of TIA or LS. Twenty-three patients had normotension (clinic BP / = 140/90mmHg and day-time ABPM < 135/85mmHg). Arterial stiffness was measured using carotid-femoral pulse wave velocity (PWV) (Complior®, ALAM Medical) and carotid-ankle vascular index (CAVI) (VaSera VS-1500N®, Fukuda Denshi). CT images were scored for WMH using the four-point Fazekas visual rating scale. Patients were grouped into no-mild WMH (scores 0–1) or moderate-severe (scores 2–3) groups. The relationship between BP, vascular stiffness and WMH was explored with t-tests, chi-square and logistic regression accounting for known cardiovascular risk factors.
Results:
Forty-four percent of patients with WCH/E had moderate-severe WMH compared to 17% of normotensives (p = 0.047). The regression model with WMH as the dependent factor, and WCH/E and cardiovascular risk factors as independent factors showed WCH/E and either CAVI or PWV to be the only independent significant factor contributing to WMH (CAVI:p = 0.038, PWV:p = 0.043)
The ac and dc electric field meters developed for the US Department of Energy
Two space-potential electric field meters developed at the Jet Propulsion Laboratory under the auspices of the U.S. Department of Energy are described. One of the meters was designed to measure dc fields, the other ac fields. Both meters use fiber optics to couple a small measuring probe to a remote readout device, so as to minimize field perturbation due to the presence of the probe. By using coherent detection, it has been possible to produce instruments whose operating range extends from about 10 V/m up to about 2.5 kV/cm, without the need for range switching on the probe. The electrical and mechanical design of both meters are described in detail. Data from laboratory tests are presented, as well as the results of the tests at the National Bureau of Standards and the Electric Power Research Institute's High Voltage Transmission Research Facility
Extended methodology for determining wetting properties of porous media
[1] Because most methods for assessing the wettability of porous materials are restricted in their applicability, we developed two new methods for measuring contact angles and particle surface energy. The proposed methods (the Wilhelmy plate method (WPM) and the modified capillary rise method (MCRM)) were tested on 24 soils. For comparison, the water drop penetration time test (WDPTT) and the sessile drop method (SDM) were also applied. It was found that advancing contact angles, measured either with WPM or MCRM, agreed well in the range of 0° to 142°. Sessile drop contact angles were within the domain enclosed by the range of advancing and receding contact angles as determined with WPM. WDPTT, however, was only sensitive in the narrow range of 85° to 115°. We conclude that both WPM and MCRM are reliable methods for determining contact angles and particle surface energy over a wide range of porous material wettabilities
A systematic review on the introduction and evaluation of magnetic augmentation of the lower oesophageal sphincter for gastro-oesophageal reflux disease
Recommended from our members
Solidification of Acidic, High Nitrate Nuclear Wastes by Grouting or Absorption on Silica Gel
The use of grout and silica gel were explored for the solidification of four types of acidic, high nitrate radioactive wastes. Two methods of grouting were tested: direct grouting and pre-neutralization. Two methods of absorption on silica gel were also tested: direct absorption and rotary spray drying. The waste simulant acidity varied between 1 N and 12 N. The waste simulant was neutralized by pre-blending calcium hydroxide with Portland cement and blast furnace slag powders prior to mixing with the simulant for grout solidification. Liquid sodium hydroxide was used to partially neutralize the simulant to a pH above 2 and then it was absorbed for silica gel solidification. Formulations for each of these methods are presented along with waste form characteristics and properties. Compositional variation maps for grout formulations are presented which help determine the optimum "recipe" for a particular waste stream. These maps provide a method to determine the proportions of waste, calcium hydroxide, Portland cement, and blast furnace slag that provide a waste form that meets the disposal acceptance criteria. The maps guide researchers in selecting areas to study and provide an operational envelop that produces acceptable waste forms. The grouts both solidify and stabilize the wastes, while absorption on silica gel produces a solid waste that will not pass standard leaching procedures (TCLP) if required. Silica gel wastes can be made to pass most leach tests if heated to 600ºC
Assessing the genetic and pathogenic variability of Pyrenophora teres f. maculata (spot form net blotch of barley) and its ability to overcome currently-used sources of resistance on the Canadian prairies
Non-Peer ReviewedEighty two isolates of the fungus Pyrenophora teres f. maculata, causal agent of spot form net blotch (SFNB) of barley, were collected across the Canadian prairies. Following genetic analysis using 13 microsatellite DNA markers, 27 isolates were selected to assess the degree of pathogenic variation in the fungus. Pathogenic variability was evaluated by inoculating isolates onto 11 barley genotypes as differential hosts at the seedling stage. One week following inoculation, the second and third leaves of each plant were rated on to a 1–9 disease severity scale, and plants with scores of 1–3 and >3 were scored as resistant and susceptible, respectively. The entire experiment was repeated. Cluster analysis revealed 13 distinct pathotype groups (virulence patterns) among the 27 representative isolates. Disease severity ratings ranged from 2.2 to 6.1 with a mean of 4.6. To assess the risk of resistance breakdown, the resistance of four barley cultivars (‘AAC Synergy’, ‘CDC Meredith’, ‘Cerveza’ and ‘Major’), which had been previously identified as resistant to SFNB on the Canadian prairies, was evaluated at the seedling stage against six isolates of P. teres f. maculata representing four different pathotypes. The resistance in ‘CDC Meredith’ was clearly overcome by all isolates tested, while ‘AAC Synergy’, ‘Cerveza’ and ‘Major’ still exhibited resistance against all of the pathotypes. The identification of fungal isolates virulent on ‘CDC Meredith’ suggests that producers should avoid growing the same resistant barley variety in short rotation, and avoid relying on resistance as the sole approach to disease management. Judicious use of fungicides, coupled with rotations of at least two years between barley crops and diversity in the barley varieties grown, will promote effective and sustainable management of spot form net blotch
Iron Deficiency and Acute Seizures: Results from Children Living in Rural Kenya and a Meta-Analysis
Australian Aboriginal children with otitis media have reduced antibody titers to specific nontypeable Haemophilus influenzae vaccine antigens
Indigenous populations experience high rates of otitis media (OM), with increased chronicity and severity, compared to those experienced by their nonindigenous counterparts. Data on immune responses to otopathogenic bacteria in these high-risk populations are lacking. Nontypeable Haemophilus influenzae (NTHi) is the predominant otopathogen in Australia. No vaccines are currently licensed to target NTHi; however, protein D (PD) from NTHi is included as a carrier protein in the 10-valent pneumococcal polysaccharide conjugate vaccine (PHiD10-CV), and other promising protein vaccine candidates exist, including outer membrane protein 4 (P4) and protein 6 (P6). We measured the levels of serum and salivary IgA and IgG against PD, P4, and P6 in Aboriginal and non-Aboriginal children with chronic OM who were undergoing surgery and compared the levels with those in healthy non-Aboriginal children (controls). We found that Aboriginal cases had lower serum IgG titers to all NTHi proteins assessed, particularly PD. In contrast, serum IgA and salivary IgA and IgG titers to each of these 3 proteins were equivalent to or higher than those in both non-Aboriginal cases and healthy controls. While serum antibody levels increased with age in healthy controls, no changes in titers were observed with age in non-Aboriginal cases, and a trend toward decreasing titers with age was observed in Aboriginal cases. This suggests that decreased serum IgG responses to NTHi outer membrane proteins may contribute to the development of chronic and severe OM in Australian Aboriginal children and other indigenous populations. These data are important for understanding the potential benefits of PHiD10-CV implementation and the development of NTHi protein-based vaccines for indigenous populations
Recommended from our members
How strong are salt marshes? Geotechnical properties of coastal wetland soils
Funder: British Geological Survey; Id: http://dx.doi.org/10.13039/501100002760This paper compares two marshes of contrasting sedimentology at Tillingham marsh, eastern England, and Warton marsh, North West England. Soil shear strength and compressibility are determined by applying geotechnical methods to determine marsh resistance to shear- and vertical effective- stresses. This research was able to isolate the influence of roots on substrate shear strength in a three-dimensional sample. In response to vertical effective stress, both the expected displacement magnitude and the vertical recovery potential of a marsh substrate are affected by past stress conditions on the marsh, particularly those resulting from desiccation. The substrate response to vertical effective stress also influences substrate shear strength through the effect of consolidation on the void ratio (or bulk density)
- …