Hydrodynamic air lubricated compliant surface bearing for an automotive gas turbine engine. 1: Journal bearing performance

A 38.1 mm (1.5 inch) diameter Hydresil Compliant Surface Air Lubricated Journal Bearing was designed and tested to obtain bearing performance characteristics at both room temperature and 315 C (600 F). Testing was performed at various speeds up to 60,000 rpm with varying loads. Rotating sensors provided an opportunity to examine the film characteristics of the compliant surface bearing. In addition to providing minimum film thickness values and profiles, many other insights into bearing operation were gained such as the influence of bearing fabrication accuracy and the influence of smooth foil deflection between the bumps

A chemical ionization mass spectrometer for continuous underway shipboard analysis of dimethylsulfide in near-surface seawater

A compact, low-cost atmospheric pressure, chemical ionization mass spectrometer ("mini-CIMS") has been developed for continuous underway shipboard measurements of dimethylsulfide (DMS) in seawater. The instrument was used to analyze DMS in air equilibrated with flowing seawater across a porous Teflon membrane equilibrator. The equilibrated gas stream was diluted with air containing an isotopically-labeled internal standard. DMS is ionized at atmospheric pressure via proton transfer from water vapor, then declustered, mass filtered via quadrupole mass spectrometry, and detected with an electron multiplier. The instrument described here is based on a low-cost residual gas analyzer (Stanford Research Systems), which has been modified for use as a chemical ionization mass spectrometer. The mini-CIMS has a gas phase detection limit of 220 ppt DMS for a 1 min averaging time, which is roughly equivalent to a seawater DMS concentration of 0.1 nM DMS at 20°C. The mini-CIMS has the sensitivity, selectivity, and time response required for underway measurements of surface ocean DMS over the full range of oceanographic conditions. The simple, robust design and relatively low cost of the instrument are intended to facilitate use in process studies and surveys, with potential for long-term deployment on research vessels, ships of opportunity, and large buoys

Progress report on the stratigraphy, sedimentology and significance of the Kimerot and Bear Creek groups, Kilohigok Basin, District of Mackenzie

Some results of ongoing field investigations of the Kimerot and Bear Creek groups are summarized as they pertain to several topics, including: (1) revision of stratigraphic nomenclature for Kilohigok Basin; (2) vertical and lateral distribution of facies/fabrics of disconformities developed in the lower Bear Creek group; ( 3) stratigraphy and sedimentology of the Beechey Formation; (4) diagenesis studies of the Peg Formation (new name); and (5) constraints on the stratigraphy, sedimentology, and provenance of the Burnside Formation

Genetic islands of Streptococcus agalactiae strains NEM316 and 2603VR and their presence in other Group B Streptococcal strains

BACKGROUND: Streptococcus agalactiae (Group B Streptococcus; GBS) is a major contributor to obstetric and neonatal bacterial sepsis. Serotype III strains cause the majority of late-onset sepsis and meningitis in babies, and thus appear to have an enhanced invasive capacity compared with the other serotypes that cause disease predominantly in immunocompromised pregnant women. We compared the serotype III and V whole genome sequences, strains NEM316 and 2603VR respectively, in an attempt to identify genetic attributes of strain NEM316 that might explain the propensity of strain NEM316 to cause late-onset disease in babies. Fourteen putative pathogenicity islands were described in the strain NEM316 whole genome sequence. Using PCR- and targeted microarray- strategies, the presence of these islands were assessed in a diverse strain collection including 18 colonizing isolates from healthy pregnant women, and 13 and 8 invasive isolates from infants with early- and late-onset sepsis, respectively. RESULTS: Side-by-side comparison of the strain NEM316 and strain 2603VR genomes revealed that they are extremely similar, with the only major difference being the capsulation loci and mobile genetic elements. PCR and Comparative Genome Hybridization (CGH) were used to define the presence of each island in 39 GBS isolates. Only islands I, VI, XII, and possibly X, met criteria of a true pathogenicity island, but no significant correlation was found between the presence of any of the fourteen islands and whether the strains were invasive or colonizing. Possible associations were seen between the presence of island VI and late-onset sepsis, and island X and early-onset sepsis, which warrant further investigation. CONCLUSION: The NEM316 and 2603VR strains are remarkable in that their whole genome sequences are so similar, suggesting that the capsulation loci or other genetic differences, such as pathogenicity islands, are the main determinants of the propensity of serotype III strains to cause late-onset disease. This study supports the notion that GBS strain NEM316 has four putative pathogenicity islands, but none is absolutely necessary for disease causation, whether early- or late-onset sepsis. Mobile genetic elements are a common feature of GBS isolates, with each strain having its own peculiar burden of transposons, phages, integrases and integrated plasmids. The majority of these are unlikely to influence the disease capacity of an isolate. Serotype associated disease phenotypes may thus be solely related to differences in the capsulation loci

Real-time Measurement of Stress and Damage Evolution During Initial Lithiation of Crystalline Silicon

Crystalline to amorphous phase transformation during initial lithiation in (100) silicon-wafers is studied in an electrochemical cell with lithium metal as the counter and reference electrode. It is demonstrated that severe stress jumps across the phase boundary lead to fracture and damage, which is an essential consideration in designing silicon based anodes for lithium ion batteries. During initial lithiation, a moving phase boundary advances into the wafer starting from the surface facing the lithium electrode, transforming crystalline silicon into amorphous LixSi. The resulting biaxial compressive stress in the amorphous layer is measured in situ and it was observed to be ca. 0.5 GPa. HRTEM images reveal that the crystalline-amorphous phase boundary is very sharp, with a thickness of ~ 1 nm. Upon delithiation, the stress rapidly reverses, becomes tensile and the amorphous layer begins to deform plastically at around 0.5 GPa. With continued delithiation, the yield stress increases in magnitude, culminating in sudden fracture of the amorphous layer into micro-fragments and the cracks extend into the underlying crystalline silicon.Comment: 12 pages, 5 figure

Development of integrated thermionic circuits for high-temperature applications

Integrated thermionic circuits (ITC) capable of extended operation in ambient temperatures up to 500 C are studied. A set of practical design and performance equations is demonstrated. Experimental results are discussed in which both devices and simple circuits were successfully operated in 5000 C environments for extended periods. It is suggested that ITC's may become an important technology for high temperature instrumentation and control systems in geothermal and other high temperature environments

Adaptive multigrid algorithm for the lattice Wilson-Dirac operator

We present an adaptive multigrid solver for application to the non-Hermitian Wilson-Dirac system of QCD. The key components leading to the success of our proposed algorithm are the use of an adaptive projection onto coarse grids that preserves the near null space of the system matrix together with a simplified form of the correction based on the so-called gamma_5-Hermitian symmetry of the Dirac operator. We demonstrate that the algorithm nearly eliminates critical slowing down in the chiral limit and that it has weak dependence on the lattice volume

Optimizing end-labeled free-solution electrophoresis by increasing the hydrodynamic friction of the drag-tag

We study the electrophoretic separation of polyelectrolytes of varying lengths by means of end-labeled free-solution electrophoresis (ELFSE). A coarse-grained molecular dynamics simulation model, using full electrostatic interactions and a mesoscopic Lattice Boltzmann fluid to account for hydrodynamic interactions, is used to characterize the drag coefficients of different label types: linear and branched polymeric labels, as well as transiently bound micelles. It is specifically shown that the label's drag coefficient is determined by its hydrodynamic size, and that the drag per label monomer is largest for linear labels. However, the addition of side chains to a linear label offers the possibility to increase the hydrodynamic size, and therefore the label efficiency, without having to increase the linear length of the label, thereby simplifying synthesis. The third class of labels investigated, transiently bound micelles, seems very promising for the usage in ELFSE, as they provide a significant higher hydrodynamic drag than the other label types. The results are compared to theoretical predictions, and we investigate how the efficiency of the ELFSE method can be improved by using smartly designed drag-tags.Comment: 32 pages, 11 figures, submitted to Macromolecule