Enhancement of the direct optical transition in nanocrystallized GaAsN alloys

[[abstract]]Using x-ray diffraction. cross-sectional transmission electron microscopy (XTEM), and infrared absorption techniques, we have investigated the effects of nanocrystallization on the structural and optical properties of GaAs0.99N0.01 grown by plasma-enhanced molecular-beam epitaxy. The x-ray diffraction results of postgrowth annealed samples with a protective Si3N4 cap exhibit significant lattice relaxation. structural inhomogeneity, and apparent nitrogen "loss," indicating the occurrence of phase separation after thermal treatment. High-resolution XTEM confirms the formation of N-enriched GaAsN nanocrystals embedded at the GaAsN/Si3N4 interface, Infrared absorption study demonstrates that the annealed sample has a strongly enhanced direct optical transition.[[fileno]]2010109010046[[department]]物理

HTX-011 reduced pain intensity and opioid consumption versus bupivacaine HCl in bunionectomy: phase III results from the randomized EPOCH 1 study.

BACKGROUND AND OBJECTIVES: There is a need for local anesthetics that provide consistent analgesia through 72 hours after surgery. This study evaluates the use of HTX-011 (bupivacaine and meloxicam in Biochronomerpolymer technology), an extended-release, dual-acting local anesthetic, in reducing both postoperative pain over 72 hours and postoperative opioid use when compared with bupivacaine hydrochloride (HCl) and saline placebo. Inclusion of low-dose meloxicam in HTX-011 is designed to reduce local inflammation caused by surgery, potentiating the analgesic effect of bupivacaine. Previously, significant synergy has been observed with bupivacaine and meloxicam with both given locally together. METHODS: EPOCH 1 was a randomized, double-blind, placebo-controlled and active-controlled phase III study in subjects undergoing a primary unilateral, distal, first metatarsal bunionectomy in which subjects received either a single intraoperative dose of HTX-011, immediate-release bupivacaine HCl or saline placebo. RESULTS: A total of 412 subjects were dosed. The results for the primary and all four key secondary endpoints were statistically significant in favor of HTX-011. HTX-011 demonstrated superior, sustained pain reduction through 72 hours, significantly reduced opioid consumption and resulted in significantly more opioid-free subjects compared with saline placebo and bupivacaine HCl. Safety was similar across groups with fewer opioid-related adverse events observed in the HTX-011 group. CONCLUSIONS: HTX-011 demonstrated significant reduction in postoperative pain through 72 hours with significant reduction in opioid consumption and a significant increase in the proportion of opioid-free subjects compared with saline placebo and the most widely used local anesthetic, bupivacaine HCl. TRIAL REGISTRATION NUMBER: NCT03295721

Effect of heat treatment and aging on the mechanical loss and strength of hydroxide catalysis bonds between fused silica samples

Hydroxide catalysis bonds are used in the aLIGO gravitational wave detectors and are an essential technology within the mirror suspensions which allowed for detector sensitivities to be reached that enabled the first direct detections of gravitational waves. Methods aimed at further improving hydroxide catalysis bonds for future upgrades to these detectors, in order to increase detection rates and the number of detectable sources, are explored. Also, the effect on the bonds of an aLIGO suspension construction procedure involving heat, the fibre welding process, is investigated. Here we show that thermal treatments can be beneficial to improving some of the bond properties important to the mirror suspensions in interferometric gravitational wave detectors. It was found that heat treating bonds at 150\,^\circC increases bond strength by a factor of approximately 1.5 and a combination of bond ageing and heat treatment of the optics at 150\,\circC reduces the mechanical loss of a bond from 0.10 to 0.05. It is also shown that current construction procedures do not reduce bond strength

Perspective on Quark Mass and Mixing Relations

Recent data indicate that $V_{ub}\cong \lambda^4 \cong (0.22)^4$, while $m_t$ seems to be $174$ GeV. The relations $m_d/m_s\sim m_s/m_b \sim \delta \sim \lambda^2 \simeq \vert V_{cb}\vert$ and $m_u/m_c\sim m_c/m_t \sim \delta^2 \sim \lambda^4 \sim \vert V_{ub}\vert$ suggest that %a plausible clean separation of the %origin of the quark mixing matrix: the down type sector is responsible for $\vert V_{us}\vert$ and $\vert V_{cb}\vert$, while $V_{ub}$ comes from the up type sector. Five to six parameters might suffice to account for the ten quark mass and mixing parameters, resulting in specific power series representations for the mass matrices. In this picture, $\delta$ seems to be the more sensible expansion parameter, while $\lambda \cong \sqrt{m_d/m_s} \sim \sqrt{\delta}$ is tied empirically to $(M_d)_{11} = 0$.Comment: 10 pages, ReVtex, no figure

Fabrication of porous carbon nanotube network

We used the spin-coating method combined with ultrasonic atomization as a continuous, one-step process to generate a two-dimensional honeycomb network that was constructed from pure multi-walled carbon nanotubes

Utilizing ARC EMCS Seedling Cassettes as Highly Versatile Miniature Growth Chambers for Model Organism Experiments

The aim of our ground testing was to demonstrate the capability of safely putting specific model organisms into dehydrated stasis, and to later rehydrate and successfully grow them inside flight proven ARC EMCS seedling cassettes. The ARC EMCS seedling cassettes were originally developed to support seedling growth during space flight. The seeds are attached to a solid substrate, launched dry, and then rehydrated in a small volume of media on orbit to initiate the experiment. We hypothesized that the same seedling cassettes should be capable of acting as culture chambers for a wide range of organisms with minimal or no modification. The ability to safely preserve live organisms in a dehydrated state allows for on orbit experiments to be conducted at the best time for crew operations and more importantly provides a tightly controlled physiologically relevant growth experiment with specific environmental parameters. Thus, we performed a series of ground tests that involved growing the organisms, preparing them for dehydration on gridded Polyether Sulfone (PES) membranes, dry storage at ambient temperatures for varying periods of time, followed by rehydration. Inside the culture cassettes, the PES membranes were mounted above blotters containing dehydrated growth media. These were mounted on stainless steel bases and sealed with plastic covers that have permeable membrane covered ports for gas exchange. The results showed we were able to demonstrate acceptable normal growth of C.elegans (nematodes), E.coli (bacteria), S.cerevisiae (yeast), Polytrichum (moss) spores and protonemata, C.thalictroides (fern), D.discoideum (amoeba), and H.dujardini (tardigrades). All organisms showed acceptable growth and rehydration in both petri dishes and culture cassettes initially, and after various time lengths of dehydration. At the end of on orbit ISS European Modular Cultivation System experiments the cassettes could be frozen at ultra-low temperatures, refrigerated, or chemically preserved before being returned to Earth for analyses. Our results suggest that with protocol modifications and future verification testing we can utilize the versatile EMCS to conduct tightly controlled experiments inside our culture cassettes for a wide variety of organisms. These physiological experiments would be designed to answer questions at the molecular level about the specific stress responses of space flight

Investigation of mechanical losses of thin silicon flexures at low temperatures

The investigation of the mechanical loss of different silicon flexures in a temperature region from 5 to 300 K is presented. The flexures have been prepared by different fabrication techniques. A lowest mechanical loss of $3\times10^{-8}$ was observed for a 130 $\mu$m thick flexure at around 10 K. While the mechanical loss follows the thermoelastic predictions down to 50 K a difference can be observed at lower temperatures for different surface treatments. This surface loss will be limiting for all applications using silicon based oscillators at low temperatures. The extraction of a surface loss parameter using different results from our measurements and other references is presented. We focused on structures that are relevant for gravitational wave detectors. The surface loss parameter $\alpha_s$ = 0.5 pm was obtained. This reveals that the surface loss of silicon is significantly lower than the surface loss of fused silica.Comment: 16 pages, 7 figure

Cryogenic and room temperature strength of sapphire jointed by hydroxide-catalysis bonding

Hydroxide-catalysis bonding is a precision technique used for jointing components in opto-mechanical systems and has been implemented in the construction of quasi-monolithic silica suspensions in gravitational wave detectors. Future detectors are likely to operate at cryogenic temperatures which will lead to a change in test mass and suspension material. One candidate material is mono-crystalline sapphire. Here results are presented showing the influence of various bonding solutions on the strength of the hydroxide-catalysis bonds formed between sapphire samples, measured both at room temperature and at 77 K, and it is demonstrated that sodium silicate solution is the most promising in terms of strength, producing bonds with a mean strength of 63 MPa. In addition the results show that the strengths of bonds were undiminished when tested at cryogenic temperatures

A Characterization of Scale Invariant Responses in Enzymatic Networks

An ubiquitous property of biological sensory systems is adaptation: a step increase in stimulus triggers an initial change in a biochemical or physiological response, followed by a more gradual relaxation toward a basal, pre-stimulus level. Adaptation helps maintain essential variables within acceptable bounds and allows organisms to readjust themselves to an optimum and non-saturating sensitivity range when faced with a prolonged change in their environment. Recently, it was shown theoretically and experimentally that many adapting systems, both at the organism and single-cell level, enjoy a remarkable additional feature: scale invariance, meaning that the initial, transient behavior remains (approximately) the same even when the background signal level is scaled. In this work, we set out to investigate under what conditions a broadly used model of biochemical enzymatic networks will exhibit scale-invariant behavior. An exhaustive computational study led us to discover a new property of surprising simplicity and generality, uniform linearizations with fast output (ULFO), whose validity we show is both necessary and sufficient for scale invariance of enzymatic networks. Based on this study, we go on to develop a mathematical explanation of how ULFO results in scale invariance. Our work provides a surprisingly consistent, simple, and general framework for understanding this phenomenon, and results in concrete experimental predictions