Primary arm spacing in chill block melt spun Ni-Mo alloys

Chill block melt spun ribbons of Ni-Mo binary alloys containing 8.0 to 41.8 wt % Mo have been prepared under carefully controlled processing conditions. The growth velocity has been determined as a function of distance from the quench surface from the observed ribbon thickness dependence on the melt puddle residence time. Primary arm spacings measured at the midribbon thickness locations show a dependence on growth velocity and alloy composition which is expected from dendritic growth models for binary alloys directionally solidified in a positive temperature gradient

Early operation experience on the ERDA/NASA 100 kW wind turbine

As part of the Energy Research and Development Administration (ERDA) wind energy program, NASA Lewis Research Center is testing an experimental 100-kW wind turbine. Rotor blade and drive shaft loads and tower deflection were measured during operation of the wind turbine at rated rpm. The blade loads measured are higher than anticipated. Preliminary results indicate that air flow blockage by the tower structure probably caused the high rotor blade bending moments

Overlay metallic-cermet alloy coating systems

A substrate, such as a turbine blade, vane, or the like, which is subjected to high temperature use is coated with a base coating of an oxide dispersed, metallic alloy (cermet). A top coating of an oxidation, hot corrosion, erosion resistant alloy of nickel, cobalt, or iron is then deposited on the base coating. A heat treatment is used to improve the bonding. The base coating serves as an inhibitor to interdiffusion between the protective top coating and the substrate. Otherwise, the protective top coating would rapidly interact detrimentally with the substrate and degrade by spalling of the protective oxides formed on the outer surface at elevated temperatures

Coating with overlay metallic-cermet alloy systems

A base layer of an oxide dispersed, metallic alloy (cermet) is arc plasma sprayed onto a substrate, such as a turbine blade, vane, or the like, which is subjected to high temperature use. A top layer of an oxidation, hot corrosion, erosion resistant alloy of nickel, cobalt, or iron is then arc plasma sprayed onto the base layer. A heat treatment is used to improve the bonding. The base layer serves as an inhibitor to interdiffusion between the protective top layer and the substrate. Otherwise, the 10 protective top layer would rapidly interact detrimentally with the substrate and degrade by spalling of the protective oxides formed on the outer surface at elevated temperatures

Analysis of Three-Dimensional Protein Images

A fundamental goal of research in molecular biology is to understand protein structure. Protein crystallography is currently the most successful method for determining the three-dimensional (3D) conformation of a protein, yet it remains labor intensive and relies on an expert's ability to derive and evaluate a protein scene model. In this paper, the problem of protein structure determination is formulated as an exercise in scene analysis. A computational methodology is presented in which a 3D image of a protein is segmented into a graph of critical points. Bayesian and certainty factor approaches are described and used to analyze critical point graphs and identify meaningful substructures, such as alpha-helices and beta-sheets. Results of applying the methodologies to protein images at low and medium resolution are reported. The research is related to approaches to representation, segmentation and classification in vision, as well as to top-down approaches to protein structure prediction.Comment: See http://www.jair.org/ for any accompanying file

Microstructures in rapidly solidified Ni-Mo alloys

Ni-Mo alloys of compositions ranging from pure Ni to Ni-40 at % Mo were rapidly solidified by Chill Block Melt Spinning in vacuum and were examined by optical metallography, X-ray diffraction and transmission electron microscopy. Rapid solidification resulted in an extension of molybdenum solubility in nickel from 28 to 37.5 at %. A number of different phases and microstructures were seen at different depths (solidification conditions) from the quenched surface of the melt spun ribbons

Experimental data and theoretical analysis of an operating 100 kW wind turbine

Experimental test data are correlated with analyses of turbine loads and complete system behavior of the ERDA-NASA 100 kW Mod-0 wind turbine generator over a broad range of steady state conditions, as well as during transient conditions. The deficit in the ambient wind field due to the upwind tower turbine support structure is found to be very significant in exciting higher harmonic loads associated with the flapping response of the blade in bending

An Aerial Gamma Ray Survey of Torness Nuclear Power Station on 27-30 March 1994

<p>An aerial gamma-ray survey of the environment of Torness Nuclear Power Station was commissioned by Scottish Nuclear Limited, and conducted by the Scottish Universities Research and Reactor Centre. The area surveyed encloses a 31km square, with Torness Nuclear Power Station at the centre, flown with a line spacing of 500m. A secondary area, in closer proximity to the nuclear site, was flown with 250m spacing.</p> <p>Over 6000 gamma ray spectra were recorded with a high volume spectrometer operated from a helicopter over a three day period in March 1994. Spectral data were recorded together with satellite navigation (GPS) and radar altimetry data. The results provide a comprehensive record of the radiation environment around Torness and have been used to map the distribution of natural and man-made radionuclides, forming a baseline to enable future environmental changes may be assessed.</p> <p>The natural radionuclides 40K, 214Bi and 208Tl are highly correlated with each other and show a distribution which reflects both the underlying geological and geomorphological features of the area. The main structural boundaries of the Dunbar-Gifford and Lammermuir faults can be partly discerned in the maps, as can some igneous intrusions. Areas with peat or alluvium cover appear as negative features in the radiometric maps.</p> <p>Radiocaesium 137Cs levels range from below 4 kBq m-2 to over 20 kBq m-2. Upland areas near Coldingham Common, Black Castle Hill and Dunbar Common show the highest values, similar in deposition pattern and level to Chernobyl activity observed in the West of Scotland and elsewhere. Published national maps derived from meteorological and ground sampling data predicted much lower levels for these locations. However core samples taken after the survey have confirmed the presence of the activity, and the attribution to Chernobyl. This finding demonstrates both the effectiveness of the method for rapid location of radioactive deposition, and the need for baseline studies to determine present levels. Count rates from a spectral window corresponding to 60Co were also mapped. The results are close to detection limits and show a slight correlation with natural sources. Therefore they are more probably due to residuals remaining after separation of spectral interferences than to low level 60Co contamination.</p> <p>Gamma ray dose rates range from approximately 0.1 to 0.6 mGy a-1 with a mean value of 0.34 mGy a-1, and are derived mainly from natural sources. Ground level measurements were taken at nine district monitoring points within the area using a 3x3" NaI spectrometer and a survey meter (Series 6/80) used routinely by SNL. Both ground based data sets were in good agreement with each other and with the aerial survey after accounting for instrumental and cosmic ray background contributions.</p> <p>There is no evidence that Torness Power Station has affected the surrounding radiation environment, within the operational and sensitivity limits of the aerial survey.</p> <p>The longer term impact of the site can be assessed by future surveys. Moreover under emergency conditions it would be possible to utilise this method for rapid mapping of the area on a timescale which cannot be matched using alternative approaches. </p&gt