Meniscus Motion Inside A DoD Inkjet Print-Head Nozzle

This is the author accepted manuscript. The final version is available from the Society for Imaging Sciences and Technology via http://www.ingentaconnect.com/contentone/ist/nipdf/2016/00002016/00000001/art00087A new study of the jetting performance for drop-on-demand (DoD) inkjet print heads investigated meniscus motions inside the transparent nozzles of MicroFab inkjet print heads. A composite image representation of the observed meniscus motions, imaged at high resolution using a spark flash light source, was developed for our subsequent analyses of the influences of drive voltage and pulse dwell time and also the ink properties. At higher drive voltages a slow damped refill (following de-pinning of the meniscus from the very edge of the nozzle exit) was also clearly observed. This and many other interesting phenomena were observed with the composite images: internal bubbles that progressed through the nozzle region over relatively long timescales, internal break-off of the jet from the meniscus surface, satellite formation and merging, and the contact line de-pinning not previously observed before.This research was performed by CSR under the Undergraduate Research Opportunities Program (UROP) scheme, within the University of Cambridge Inkjet Research Centre, funded by Xaar Ltd. SDH supervised and held an EPSRC Impact Acceleration Knowledge Transfer Fellowship (grant no. EP/K5037574/1) for working with a Xaar R&D team during the initial part of this project

Droplet Misalignment Limit for Inkjet Printing into Cavities on Textured Surfaces

The control of droplets deposited onto textured surfaces is of great importance for both engineering and medical applications. This research investigates the dynamics of a single droplet deposited into a confined space and its final equilibrium morphology, with emphasis given to droplet deposition under print head misalignment, the effect of nonuniform wettability, and deposition of droplets with varying sizes. A multiphase pseudopotential lattice Boltzmann methodology is used to simulate the process of deposition. The print quality is characterized in terms of a parameter referred to as the wetted fraction, which describes the proportion of the cavity that is wetted by the droplet. Our results show how single and multiple axis misalignment affect the final equilibrium morphology, and it was found for comparable configurations that multiaxis misalignment resulted in a higher wetted fraction. Investigations into wettabilities of the substrate and cavity wall revealed how larger ratios of the contact angles between the two enhance the ability for the droplet to self-align within the cavity. Additionally, a range of uniform wettabilities between the substrate and cavity were found, which mitigate against misalignment. Investigations into varying droplet sizes relative to the cavity revealed how misalignment can be compensated for with larger droplets, and limits for filling a cavity with a single drop are defined. Finally, we explore the deposition with misalignment into closely positioned cavities where it is found that the spacing between cavities is a key factor in determining the maximum permissible misalignment

Texture Analysis of Fractional Water Content Images Acquired during PET/MRI: Initial Evidence for an Association with Total Lesion Glycolysis, Survival and Gene Mutation Profile in Primary Colorectal Cancer.

To assess the capability of fractional water content (FWC) texture analysis (TA) to generate biologically relevant information from routine PET/MRI acquisitions for colorectal cancer (CRC) patients. Thirty consecutive primary CRC patients (mean age 63.9, range 42-83 years) prospectively underwent FDG-PET/MRI. FWC tumor parametric images generated from Dixon MR sequences underwent TA using commercially available research software (TexRAD). Data analysis comprised (1) identification of functional imaging correlates for texture features (TF) with low inter-observer variability (intraclass correlation coefficient: ICC > 0.75), (2) evaluation of prognostic performance for FWC-TF, and (3) correlation of prognostic imaging signatures with gene mutation (GM) profile. Of 32 FWC-TF with ICC > 0.75, 18 correlated with total lesion glycolysis (TLG, highest: rs = -0.547, p = 0.002). Using optimized cut-off values, five MR FWC-TF identified a good prognostic group with zero mortality (lowest: p = 0.017). For the most statistically significant prognostic marker, favorable prognosis was significantly associated with a higher number of GM per patient (medians: 7 vs. 1.5, p = 0.009). FWC-TA derived from routine PET/MRI Dixon acquisitions shows good inter-operator agreement, generates biological relevant information related to TLG, GM count, and provides prognostic information that can unlock new clinical applications for CRC patients

Formulation, characterisation and flexographic printing of novel Boger fluids to assess the effects of ink elasticity on print uniformity

Model elastic inks were formulated, rheologically characterised in shear and extension, and printed via flexography to assess the impact of ink elasticity on print uniformity. Flexography is a roll-to-roll printing process with great potential in the mass production of printed electronics for which understanding layer uniformity and the influence of rheology is of critical importance. A new set of flexo-printable Boger fluids was formulated by blending polyvinyl alcohol and high molecular weight polyacrylamide to provide inks of varying elasticity. During print trials, the phenomenon of viscous fingering was observed in all prints, with those of the Newtonian ink exhibiting a continuous striping in the printing direction. Increasing elasticity significantly influenced this continuity, disrupting it and leading to a quantifiable decrease in the overall relative size of the printed finger features. As such, ink elasticity was seen to have a profound effect on flexographic printing uniformity, showing the rheological tuning of inks may be a route to obtaining specific printed features

Self-Renewal and Differentiation Capacity of Urine-Derived Stem Cells after Urine Preservation for 24 Hours

The authors would like to thank Karl-Erik Andersson for his valuable comments and Ms. Karen Klein (Research Support Core, Wake Forest School of Medicine) for her editorial assistance with this manuscript.Administrative support: AA. Editorial help: AA. Conceived and designed the experiments: YYZ. Performed the experiments: RL GL YS SB. Analyzed the data: RL GL YS SB XL XZ HL YYZ. Contributed reagents/materials/analysis tools: AA. Wrote the paper: RL GL YYZ.Despite successful approaches to preserve organs, tissues, and isolated cells, the maintenance of stem cell viability and function in body fluids during storage for cell distribution and transportation remains unexplored. The aim of this study was to characterize urine-derived stem cells (USCs) after optimal preservation of urine specimens for up to 24 hours. A total of 415 urine specimens were collected from 12 healthy men (age range 20–54 years old). About 6×104 cells shed off from the urinary tract system in 24 hours. At least 100 USC clones were obtained from the stored urine specimens after 24 hours and maintained similar biological features to fresh USCs. The stored USCs had a “rice grain” shape in primary culture, and expressed mesenchymal stem cell surface markers, high telomerase activity, and normal karyotypes. Importantly, the preserved cells retained bipotent differentiation capacity. Differentiated USCs expressed myogenic specific proteins and contractile function when exposed to myogenic differentiation medium, and they expressed urothelial cell-specific markers and barrier function when exposed to urothelial differentiation medium. These data demonstrated that up to 75% of fresh USCs can be safely persevered in urine for 24 hours and that these cells stored in urine retain their original stem cell properties, indicating that preserved USCs could be available for potential use in cell-based therapy or clinical diagnosis.Yeshttp://www.plosone.org/static/editorial#pee

Evidence-based Kernels: Fundamental Units of Behavioral Influence

This paper describes evidence-based kernels, fundamental units of behavioral influence that appear to underlie effective prevention and treatment for children, adults, and families. A kernel is a behavior–influence procedure shown through experimental analysis to affect a specific behavior and that is indivisible in the sense that removing any of its components would render it inert. Existing evidence shows that a variety of kernels can influence behavior in context, and some evidence suggests that frequent use or sufficient use of some kernels may produce longer lasting behavioral shifts. The analysis of kernels could contribute to an empirically based theory of behavioral influence, augment existing prevention or treatment efforts, facilitate the dissemination of effective prevention and treatment practices, clarify the active ingredients in existing interventions, and contribute to efficiently developing interventions that are more effective. Kernels involve one or more of the following mechanisms of behavior influence: reinforcement, altering antecedents, changing verbal relational responding, or changing physiological states directly. The paper describes 52 of these kernels, and details practical, theoretical, and research implications, including calling for a national database of kernels that influence human behavior