Beam Cleaning and Collimation Systems

Collimation systems in particle accelerators are designed to dispose of unavoidable losses safely and efficiently during beam operation. Different roles are required for different types of accelerator. The present state of the art in beam collimation is exemplified in high-intensity, high-energy superconducting hadron colliders, like the CERN Large Hadron Collider (LHC), where stored beam energies reach levels up to several orders of magnitude higher than the tiny energies required to quench cold magnets. Collimation systems are essential systems for the daily operation of these modern machines. In this document, the design of a multistage collimation system is reviewed, taking the LHC as an example case study. In this case, unprecedented cleaning performance has been achieved, together with a system complexity comparable to no other accelerator. Aspects related to collimator design and operational challenges of large collimation systems are also addressed.Comment: 35 pages, contribution to the 2014 Joint International Accelerator School: Beam Loss and Accelerator Protection, Newport Beach, CA, USA , 5-14 Nov 201

The chemical structure of the very young starless core L1521E

L1521E is a dense starless core in Taurus that was found to have relatively low molecular depletion by earlier studies, thus suggesting a recent formation. We aim to characterize the chemical structure of L1521E and compare it to the more evolved L1544 pre-stellar core. We have obtained $\sim$2.5$\times$2.5 arcminute maps toward L1521E using the IRAM-30m telescope in transitions of various species. We derived abundances for the species and compared them to those obtained toward L1544. We estimated CO depletion factors. Similarly to L1544, $c$-C$_3$H$_2$ and CH$_3$OH peak at different positions. Most species peak toward the $c$-C$_3$H$_2$ peak. The CO depletion factor derived toward the $Herschel$ dust peak is 4.3$\pm$1.6, which is about a factor of three lower than that toward L1544. The abundances of sulfur-bearing molecules are higher toward L1521E than toward L1544 by factors of $\sim$2-20. The abundance of methanol is similar toward the two cores. The higher abundances of sulfur-bearing species toward L1521E than toward L1544 suggest that significant sulfur depletion takes place during the dynamical evolution of dense cores, from the starless to pre-stellar stage. The CO depletion factor measured toward L1521E suggests that CO is more depleted than previously found. Similar CH$_3$OH abundances between L1521E and L1544 hint that methanol is forming at specific physical conditions in Taurus, characterized by densities of a few $\times$10$^4$ cm$^{-3}$ and $N$(H$_2$)$\gtrsim$10$^{22}$ cm$^{-2}$, when CO starts to catastrophically freeze-out, while water can still be significantly photodissociated, so that the surfaces of dust grains become rich in solid CO and CH$_3$OH, as already found toward L1544. Methanol can thus provide selective crucial information about the transition region between dense cores and the surrounding parent cloud.Comment: Accepted for publication in A&A, abstract abridge

Baseline LHC machine parameters and configuration of the 2015 proton run

This paper shows the baseline LHC machine parameters for the 2015 start-up. Many systems have been upgraded during LS1 and in 2015 the LHC will operate at a higher energy than before and with a tighter filling scheme. Therefore, the 2015 commissioning phase risks to be less smooth than in 2012. The proposed starting configuration puts the focus on feasibility rather than peak performance and includes margins for operational uncertainties. Instead, once beam experience and a better machine knowledge has been obtained, a push in $\beta^*$ and performance can be envisaged. In this paper, the focus is on collimation settings and reach in $\beta^*$---other parameters are covered in greater depth by other papers in these proceedings.Comment: submitted for publication in a CERN yellow report (Proceedings of the LHC Performance Workshop - Chamonix 2014

LHC Cleaning Efficiency with Imperfections

The performance reach of the LHC depends on the magnitude of beam losses and the achievable cleaning efficiency of its collimation system. The ideal performance reach for the nominal Phase 1 collimation system is reviewed. However, unavoidable imperfections affect any accelerator and can further deteriorate the collimation performance. Multiple static machine and collimator imperfections were included in the LHC tracking simulations. Error models for collimator jaw flatness, collimator setup accuracy, the LHC orbit and the LHC aperture were set up, based to the maximum extent possible on measurements and results of experimental beam tests. It is shown that combined “realistic” imperfections can reduce the LHC cleaning efficiency by about a factor 11 on average

Manejo de Frankliniella occidentalis (Pergande) (Thysanoptera: Thripidae) na cultura do morangueiro no Rio Grande do Sul.

Esta Circular Técnica tem como objetivo descrever a biologia de F. occidentalis na cultura do morangueiro, caracterizar o tipo de injúria causada pelo inseto em flores e frutos e fornecer informações para o monitoramento e o controle da espécie na cultura no Estado do Rio Grande do Sul.bitstream/item/73816/1/cir090.pd

Beam Commissioning Plan For LHC Collimation

The Large Hadron Collider extends the present state-of-the-art in stored beam energy by 2-3 orders of magnitude. A sophisticated system of collimators is implemented along the 27 km ring and mainly in two dedicated cleaning insertions, to intercept and absorb unavoidable beam losses which could induce quenches in the superconducting (sc) magnets. 88 collimators for the two beams are initially installed for the so called Phase 1. An optimized strategy for the commissioning of this considerable number of collimators has been defined. This optimized strategy maximizes cleaning efficiency and tolerances available for operation, while minimizing the required beam time for collimator setup and ensuring at all times the required passive machine protection. It is shown that operational tolerances from collimation can initially be significantly relaxed

The effect of cooling water on magnet vibrations

The quadrupole magnets in the CLIC Test Facility II (CTF2) incorporate a water cooling circuit. In the frame-work of the CLIC stability study, the mechanical vibrations of the magnets were measured for different flows of cool-ing water. We present the results and compare them with simple theoretical estimates. It is shown that the vibra-tion requirements of the Compact LInear Collider (CLIC) quadrupoles with cooling water can basically be met