Assessment of Pesticide Use in Major Vegetables From Farmers\u27 Perception and Knowledge in Dhading District, Nepal

A field study was carried out to assess the pesticide use status in major vegetable crops from farmers\u27 perception and knowledge in Dhading, Nepal in 2019. Field study was carried with 100 commercial farmer\u27s using semi-structure questionnaire by face to face interview. This study was analyzed by categorization of farmers into small holder (51) and large holder (49) groups on the basis of mean area of vegetable cultivation (6.48 ropani). The highest amount of pesticides is needed in tomato in both large holders and small holders according to the farmer\u27s experience. Among the study farmer\u27s, 41% of them spray the pesticides by making a cocktail or mixed method and 56%  follow the waiting period of 3-5 days in both of the cases. A significant positive correlation was found at 5% level of significance between the knowledge and practice pattern of waiting period of the pesticides and negative correlation was found between the Personal Protective equipment score and health hazard score. Headache was the major health hazards faced by the farmers which was higher in small holders (66.7%) as compared to the large holders (46.9%). Mask was the most used PPE by the farmer\u27s i.e. by 83% in overall. Fourty three percent of the farmer\u27s throw the pesticide containers in secret place after using of it.The use of PPE was seen lower in small holders as compared to the large holders. This study reveals the necessities of suitable program and policies regarding the knowledge, safe handling and use of pesticide among the farmer\u27s level

Soil Chemical Properties Under Conservation Agriculture and Cereal-Based Cropping System in Eastern Tarai of Nepal

Field experiments were conducted for four years (2014-2017) at five locations namely Salbani, Bhokraha, Simariya, Bhaluwa and Kaptanganj of Sunsari district to assess the changes in soil chemical properties under conservation agriculture (CA)-based practices in two cropping systems namely rice-kidney bean-maize at Salbani and rice-wheat at rest of the locations. In rice-wheat cropping system, there were four treatments: (1) conventional tillage (CT) for rice transplantation and subsequent wheat sowing, (2) conventional tillage rice transplantation followed by zero tillage (ZT) wheat, (3) unpuddled rice transplantation followed by zero tillage wheat, (4) zero tillage in both rice and wheat. Similarly, in rice-kidney bean-maize cropping system, there were four treatments; (1) conventional tillage for rice transplantation and sowing of both kidney bean and maize, (2) conventional tillage rice transplantation followed by zero tillage in both kidney bean and maize, (3) unpuddled rice transplantation followed by zero tillage in both kidney bean and maize, (4) zero tillage in all three crops. Soil samples were taken at initial and every year after rice harvest.The soil samples were analyzed for total nitrogen, available phosphorus, available potassium, pH and soil organic matter.Total nitrogen (N) showed a slightly decreasing trend in the first three years and showed a slight increase at the end of experiment under ZT in all locations. The total N under ZT changed from 0.12 to 0.13%, 0.05 to 0.06%, 0.10 to 0.12%, 0.11 to 0.08% and 0.09 to 0.13% in Salbani, Bhokraha, Simariya, Bhaluwa and Kaptanganj, respectively.  All locations showed the positive values of available potassium; Salbani  revealing considerable change of 64.3 to 78.5 mg/kg in CT while 68.4 to 73.3 mg/kg in ZT condition. The treatment where rice was transplanted in unpuddled condition and zero tilled to wheat, had a mean value of available phosphorus and potassium as 87.3 and 81.9 mg/kg respectively. Soil pH ranged from 4.8 to 7.1 in CT while it was 5.2 to 6.8 in ZT across the locations. The change in soil organic matter in CT of all locations except Salbani was narrower as compared to ZT

Long reach cantilevers for sub-cellular force measurements

Maneuverable, high aspect ratio poly 3-4 ethylene dioxythiophene (PEDOT) fibers are fabricated for use as cellular force probes that can interface with individual pseudopod adhesive contact sites without forming unintentional secondary contacts to the cell. The straight fibers have lengths between 5 and 40 μm and spring constants in the 0.07-23.2 nN μm-1 range. The spring constants of these fibers were measured directly using an atomic force microscope (AFM). These AFM measurements corroborate determinations based on the transverse vibrational resonance frequencies of the fibers, which is a more convenient method. These fibers are employed to characterize the time dependent forces exerted at adhesive contacts between apical pseudopods of highly migratory D. discoideum cells and the PEDOT fibers, finding an average terminal force of 3.1 ± 2.7 nN and lifetime of 23.4 ± 18.5 s to be associated with these contacts

Forces at Individual Pseudopod-Filament Adhesive Contacts

On-chip cellular force sensors are fabricated from cantilever poly(3,4-ethylene dioxythiophene) filaments that visibly deflect under forces exerted at individual pseudopod-filament adhesive contacts. The shape of the deflected filaments and their ∼3 nN/μm spring constants are predicted by cantilever rod theory. Pulling forces exerted by Dictyostelium discoideumcells at these contacts are observed to reach ∼20 nN without breaking the contact

Sustainable nitrogen fixation from synergistic effect of photo-electrochemical water splitting and atmospheric pressure N2 plasma

In this study, nitrogen fixation in the electrolyte was achieved by atmospheric pressure non-thermal plasma generated by a sinusoidal power supply (with an applied voltage of 10 kV and frequency of 33 kHz). Ammonia measurements on plasma exposed electrolyte at several working gas and purging gas conditions revealed that nitrogen plasma in the same gas environment is more favourable for plasma-assisted ammonia synthesis. In addition, photo-electrochemical water splitting was performed by irradiating UV light on a titanium dioxide semiconductor photo-anode to generate hydrogen donor in nitrogen reduction reaction. The amount of ammonia synthesized by this synergistic process of photo-electrochemical water splitting and nitrogen plasma is six times higher than that obtained by nitrogen plasma alone. An increase in the co-synthesized NOX concentrations and background contamination at reaction site reduces the ammonia synthesis rate and Faraday efficiency. However, the ammonia production efficiency was increased up to 72% by using a proton-exchange membrane which prevents the diffusion of oxygen evolved from water splitting into the plasma, and by reducing the axial distance between the plasma electrode and reaction site. The sustainable nitrogen fixation process reported herein can be performed at atmospheric pressure conditions without a direct input of hydrogen gas or any catalyst

Determination of energy-dependent neutron backgrounds using shadow bars

Understanding the neutron background is essential for determining the neutron yield from nuclear reactions. In the analysis presented here, the shadow bars are placed in front of neutron detectors to determine the energy dependent neutron background fractions. The measurement of neutron spectra with and without shadow bars is important to determine the neutron background more accurately. The neutron background, along with its sources and systematic uncertainties, are explored with a focus on the impact of background models and their dependence on neutron energy.Comment: 7 pages, 10 figure

An experimentally-achieved information-driven Brownian motor shows maximum power at the relaxation time

We present an experimental realization of an information-driven Brownian motor by periodically cooling a Brownian particle trapped in a harmonic potential connected to a single heat bath, where cooling is carried out by the information process consisting of measurement and feedback control. We show that the random motion of the particle is rectified by symmetry-broken feedback cooling where the particle is cooled only when it resides on the specific side of the potential center at the instant of measurement. Studying how the motor thermodynamics depends on cycle period tau relative to the relaxation time tau(B) of the Brownian particle, we find that the ratcheting of thermal noise produces the maximum work extraction when tau >= 5 tau(B) while the extracted power is maximum near tau= tau(B), implying the optimal operating time for the ratcheting process. In addition, we find that the average transport velocity is monotonically decreased as tau increases and present the upper bound for the velocity

Line tension and its influence on droplets and particles at surfaces

In this review we examine the influence of the line tension τ on droplets and particles at surfaces. The line tension influences the nucleation behavior and contact angle of liquid droplets at both liquid and solid surfaces and alters the attachment energetics of solid particles to liquid surfaces. Many factors, occurring over a wide range of length scales, contribute to the line tension. On atomic scales, atomic rearrangements and reorientations of submolecular components give rise to an atomic line tension contribution τatom (∼1 nN), which depends on the similarity/dissimilarity of the droplet/particle surface composition compared with the surface upon which it resides. At nanometer length scales, an integration over the van der Waals interfacial potential gives rise to a mesoscale contribution |τvdW| ∼ 1–100 pN while, at millimeter length scales, the gravitational potential provides a gravitational contribution τgrav ∼ +1–10 μN. τgrav is always positive, whereas, τvdW can have either sign. Near wetting, for very small contact angle droplets, a negative line tension may give rise to a contact line instability. We examine these and other issues in this review