Particle Size Distribution in Aluminum Manufacturing Facilities.

As part of exposure assessment for an ongoing epidemiologic study of heart disease and fine particle exposures in aluminum industry, area particle samples were collected in production facilities to assess instrument reliability and particle size distribution at different process areas. Personal modular impactors (PMI) and Minimicro-orifice uniform deposition impactors (MiniMOUDI) were used. The coefficient of variation (CV) of co-located samples was used to evaluate the reproducibility of the samplers. PM2.5 measured by PMI was compared to PM2.5 calculated from MiniMOUDI data. Mass median aerodynamic diameter (MMAD) and concentrations of sub-micrometer (PM1.0) and quasi-ultrafine (PM0.56) particles were evaluated to characterize particle size distribution. Most of CVs were less than 30%. The slope of the linear regression of PMI_PM2.5 versus MiniMOUDI_PM2.5 was 1.03 mg/m3 per mg/m3 (± 0.05), with correlation coefficient of 0.97 (± 0.01). Particle size distribution varied substantively in smelters, whereas it was less variable in fabrication units with significantly smaller MMADs (arithmetic mean of MMADs: 2.59 μm in smelters vs. 1.31 μm in fabrication units, p = 0.001). Although the total particle concentration was more than two times higher in the smelters than in the fabrication units, the fraction of PM10 which was PM1.0 or PM0.56 was significantly lower in the smelters than in the fabrication units (p < 0.001). Consequently, the concentrations of sub-micrometer and quasi-ultrafine particles were similar in these two types of facilities. It would appear, studies evaluating ultrafine particle exposure in aluminum industry should focus on not only the smelters, but also the fabrication facilities

Ischemic Heart Disease Incidence in Relation to Fine versus Total Particulate Matter Exposure in a U.S. Aluminum Industry Cohort.

Ischemic heart disease (IHD) has been linked to exposures to airborne particles with an aerodynamic diameter <2.5 μm (PM2.5) in the ambient environment and in occupational settings. Routine industrial exposure monitoring, however, has traditionally focused on total particulate matter (TPM). To assess potential benefits of PM2.5 monitoring, we compared the exposure-response relationships between both PM2.5 and TPM and incidence of IHD in a cohort of active aluminum industry workers. To account for the presence of time varying confounding by health status we applied marginal structural Cox models in a cohort followed with medical claims data for IHD incidence from 1998 to 2012. Analyses were stratified by work process into smelters (n = 6,579) and fabrication (n = 7,432). Binary exposure was defined by the 10th-percentile cut-off from the respective TPM and PM2.5 exposure distributions for each work process. Hazard Ratios (HR) comparing always exposed above the exposure cut-off to always exposed below the cut-off were higher for PM2.5, with HRs of 1.70 (95% confidence interval (CI): 1.11-2.60) and 1.48 (95% CI: 1.02-2.13) in smelters and fabrication, respectively. For TPM, the HRs were 1.25 (95% CI: 0.89-1.77) and 1.25 (95% CI: 0.88-1.77) for smelters and fabrication respectively. Although TPM and PM2.5 were highly correlated in this work environment, results indicate that, consistent with biologic plausibility, PM2.5 is a stronger predictor of IHD risk than TPM. Cardiovascular risk management in the aluminum industry, and other similar work environments, could be better guided by exposure surveillance programs monitoring PM2.5

Incident Ischemic Heart Disease After Long-Term Occupational Exposure to Fine Particulate Matter: Accounting for 2 Forms of Survivor Bias.

Little is known about the heart disease risks associated with occupational, rather than traffic-related, exposure to particulate matter with aerodynamic diameter of 2.5 µm or less (PM2.5). We examined long-term exposure to PM2.5 in cohorts of aluminum smelters and fabrication workers in the United States who were followed for incident ischemic heart disease from 1998 to 2012, and we addressed 2 forms of survivor bias. Left truncation bias was addressed by restricting analyses to the subcohort hired after the start of follow up. Healthy worker survivor bias, which is characterized by time-varying confounding that is affected by prior exposure, was documented only in the smelters and required the use of marginal structural Cox models. When comparing always-exposed participants above the 10th percentile of annual exposure with those below, the hazard ratios were 1.67 (95% confidence interval (CI): 1.11, 2.52) and 3.95 (95% CI: 0.87, 18.00) in the full and restricted subcohorts of smelter workers, respectively. In the fabrication stratum, hazard ratios based on conditional Cox models were 0.98 (95% CI: 0.94, 1.02) and 1.17 (95% CI: 1.00, 1.37) per 1 mg/m(3)-year in the full and restricted subcohorts, respectively. Long-term exposure to occupational PM2.5 was associated with a higher risk of ischemic heart disease among aluminum manufacturing workers, particularly in smelters, after adjustment for survivor bias

PID vs LQ Control Techniques Applied to an Indoor Micro Quadrotor

The development of miniature flying robots has become a reachable dream thanks to the new sensing and actuating technologies. Micro VTOL1 systems represent a useful class of flying robots because of their strong abilities for small-area monitoring and building exploration. In this paper, we present the results of two model-based control techniques applied to an autonomous four-rotor micro helicopter called Quadrotor. A classical approach (PID) assuming a simplified dynamics and a modern technique (LQ), based on a more complete model. Various simulations were performed and several tests on the bench validate the control laws. Finally, we present the results of the first test in flight with the helicopter released. These developments are part of the OS42 project in our lab3

SKY-SAILOR Design of an autonomous solar powered martian airplane

For more than two decades, Mars has been of great interest for scientific exploration, using orbiting spacecrafts or landers. Orbiters like Mars Express cover large areas and give images of the surface with a resolution limited to several meters. Rovers missions, like Pathfinder or MER, offer the ability to maneuver to scientifically interesting sites, perform analysis of soil and rock composition, but are limited in range to the immediate surroundings of the landing site. There is a strategic gap for systems that would combine high-resolution imagery and extensive coverage. This gap can be addressed by micro-airplanes that will give more accurate images than satellites, thanks to their proximity to the ground (about 0.5 to 2 km) and cover much larger areas than rovers without being limited by terrain roughness. This paper presents a feasibility study and the first design of a very lightweight solar powered airplane for Mars exploration. Called Sky-Sailor, it was investigated in an ESA definition study within the framework of the Startiger technology program

Identification of regeneration-associated genes after central and peripheral nerve injury in the adult rat

Background: It is well known that neurons of the peripheral nervous system have the capacity to regenerate a severed axon leading to functional recovery, whereas neurons of the central nervous system do not regenerate successfully after injury. The underlying molecular programs initiated by axotomized peripheral and central nervous system neurons are not yet fully understood.Results: To gain insight into the molecular mechanisms underlying the process of regeneration in the nervous system, differential display polymerase chain reaction has been used to identify differentially expressed genes following axotomy of peripheral and central nerve fibers. For this purpose, axotomy induced changes of regenerating facial nucleus neurons, and non-regenerating red nucleus and Clarke's nucleus neurons have been analyzed in an intra-animal side-to-side comparison. One hundred and thirty five gene fragments have been isolated, of which 69 correspond to known genes encoding for a number of different functional classes of proteins such as transcription factors, signaling molecules, homeobox-genes, receptors and proteins involved in metabolism. Sixty gene fragments correspond to genomic mouse sequences without known function. In situ-hybridization has been used to confirm differential expression and to analyze the cellular localization of these gene fragments. Twenty one genes (similar to 15%) have been demonstrated to be differentially expressed.Conclusions: The detailed analysis of differentially expressed genes in different lesion paradigms provides new insights into the molecular mechanisms underlying the process of regeneration and may lead to the identification of genes which play key roles in functional repair of central nervous tissues

Supersymmetric Higgs Yukawa Couplings to Bottom Quarks at next-to-next-to-leading Order

The effective bottom Yukawa couplings are analyzed for the minimal supersymmetric extension of the Standard Model at two-loop accuracy within SUSY-QCD. They include the resummation of the dominant corrections for large values of tg(beta). In particular the two-loop SUSY-QCD corrections to the leading SUSY-QCD and top-induced SUSY-electroweak contributions are addressed. The residual theoretical uncertainties range at the per-cent level.Comment: 25 pages, 9 figures, added comments and references, typos corrected, results unchanged, published versio

Testing supersymmetry at the LHC through gluon-fusion production of a slepton pair

Renormalizable quartic couplings among new particles are typical of supersymmetric models. Their detection could provide a test for supersymmetry, discriminating it from other extensions of the Standard Model. Quartic couplings among squarks and sleptons, together with the SU(3) gauge couplings for squarks, allow a new realization of the gluon-fusion mechanism for pair-production of sleptons at the one-loop level. The corresponding production cross section, however, is at most of ${\cal O}(1)$fb for slepton and squark masses of ${\cal O}(100)$GeV. We then extend our investigation to the gluon-fusion production of sleptons through the exchange of Higgs bosons. The cross section is even smaller, of ${\cal O}(0.1)$fb, if the exchanged Higgs boson is considerably below the slepton-pair threshold, but it is enhanced when it is resonant. It can reach ${\cal O}(10)$fb for the production of sleptons of same-chirality, exceeding these values for $\widetilde{\tau}$'s of opposite-chirality, even when chirality-mixing terms in the squark sector are vanishing. The cross section can be further enhanced if these mixing terms are nonnegligible, providing a potentially interesting probe of the Higgs sector, in particular of parameters such as $A$, $\mu$, and $\tan\beta$.Comment: 28 pages, 11 figure

Peripheral Blood Gene Expression as a Novel Genomic Biomarker in Complicated Sarcoidosis

Sarcoidosis, a systemic granulomatous syndrome invariably affecting the lung, typically spontaneously remits but in ∼20% of cases progresses with severe lung dysfunction or cardiac and neurologic involvement (complicated sarcoidosis). Unfortunately, current biomarkers fail to distinguish patients with remitting (uncomplicated) sarcoidosis from other fibrotic lung disorders, and fail to identify individuals at risk for complicated sarcoidosis. We utilized genome-wide peripheral blood gene expression analysis to identify a 20-gene sarcoidosis biomarker signature distinguishing sarcoidosis (n = 39) from healthy controls (n = 35, 86% classification accuracy) and which served as a molecular signature for complicated sarcoidosis (n = 17). As aberrancies in T cell receptor (TCR) signaling, JAK-STAT (JS) signaling, and cytokine-cytokine receptor (CCR) signaling are implicated in sarcoidosis pathogenesis, a 31-gene signature comprised of T cell signaling pathway genes associated with sarcoidosis (TCR/JS/CCR) was compared to the unbiased 20-gene biomarker signature but proved inferior in prediction accuracy in distinguishing complicated from uncomplicated sarcoidosis. Additional validation strategies included significant association of single nucleotide polymorphisms (SNPs) in signature genes with sarcoidosis susceptibility and severity (unbiased signature genes - CX3CR1, FKBP1A, NOG, RBM12B, SENS3, TSHZ2; T cell/JAK-STAT pathway genes such as AKT3, CBLB, DLG1, IFNG, IL2RA, IL7R, ITK, JUN, MALT1, NFATC2, PLCG1, SPRED1). In summary, this validated peripheral blood molecular gene signature appears to be a valuable biomarker in identifying cases with sarcoidoisis and predicting risk for complicated sarcoidosis.</p