Identifying cold-water coral ecosystem by using benthic foraminiferal indicators: from active reefs to the geological record

Cold-water coral ecosystems dominated by the species Lophelia pertusa and Madrepora oculata, as well as cold-water coral carbonate mounds (fossils and/or active) occur worldwide and are especially developed along the European margin, from northern Norway to the Gulf of Cadiz and into the Alboran Sea. Their discovery is a major achievement of the last few decades and their widespread occurrence presents a challenge to understand their development, preservation and possible importance in the geologic record.On the Norwegian shelf active/living reefs are developed on elevated hard substrata. Along the Irish margin L. pertusa builds large fossil and/or active carbonate mounds. In the Gulf of Cadiz and in the Alboran Sea buried reefs and patch reefs are generally found in association with mud volcanoes.In modern oceans, they provide important ecological niches for the marine benthic fauna in the deep-sea. In comparison to the macrofauna the microfauna, particularly the foraminifera associated to these systems, are poorly known. We present here a detailed study based on quantitative analyses of benthic and planktonic foraminifera together with the statistical treatment of assemblage data collected along the Norwegian margin, in the Porcupine-Rockall region and in the Alboran Sea.The three regions were and/or are site of cold-water coral ecosystems settlements. Our study reveals that in the Porcupine/Rockall region benthic foraminiferal assemblages are strictly related to the distribution of facies. On the Norwegian margin, benthic foraminiferal habitats are weakly defined and grade one into the other preventing the sharp facies separation observed along the Irish margin (Margreth et al., 2009). In the Alboran Sea cold-water coral ecosystems and cold-water carbonate mounds are presently buried and corals are generally fragmented. However, benthic assemblages from coral-rich layers in the Alboran Sea and those from Porcupine/Rockall and Norway show remarkable similarities. In particular, epifaunal-attached species such as Discanomalina coronata, Cibicides refulgens, and Lobatula lobatula dominate the assemblages with D. coronata restricted to living cold-water coral reefs facies only and/or in co-occurrence with coral fragments. In conclusion, our data suggest that although cold-water coral ecosystems occur at different latitudes, the associated foraminiferal assemblages are consistent from Norway to the Western Mediterranean. Thus they can be used to identify these ecosystems even in the geologic record, when the corals are often strongly dissolved like in the Alboran Sea

The R.V. Pelagia pre-drilling site survey at the Rockall and Porcupine cold water coral mounds provinces, European Atlantic margin. The CARBONATE project, ESF EuroMARC program

From 30 September to 22 October 2007 a cruise with the Royal NIOZ research vessel Pelagia was carried out within the framework of the ESF (EuroMARC) project CARBONATE. The goal of this cruise was to complete the existing data set of carbonate mounds present at the European Atlantic margin in order to be able to choose suitable coring sites to drill complete top to base sections through the carbonate mounds with the MeBo drilling device. This is a remotely operated drill that is placed at the sea floor and capable of drilling sediment cores with a maximum length of 85 metres. The drilling cruise, with the Irish research vessel Celtic Explorer, is planned to take place in the summer of 2008.During the Pelagia cruise 5 carbonate mound provinces were visited. The mounds were selected based on two main criteria:the mound provinces should represent different stages in mound developmentit must be possible to penetrate the mounds from top to base with the MeBo (expected maximum sequence thickness in the order of 75 m)The first area that was visited is located at the SE Rockall Bank margin. These mounds are characterised by abundant living cold water corals at their top. The second mound province that was visited is located at the SW Rockall Bank. Initially a large mound cluster known as Franken Mound was chosen for detailed studies. This mound, as well as smaller mounds in the vicinity, is dominated by dead corals and it is considered to be in what is often called the retirement stage. At theWand N margin of the Porcupine Bank two areas were visited. Most of the mounds occur as isolated structures. Only limited amounts of living cold water corals are present. The mounds in the last area that was visited are also referred to as the Magellan Mounds. This is a group of small (<100 m) mounds located in the Porcupine Seabight. These mounds are mostly fully buried and thus represent the final stage of mound development.At all sites a multibeam bathymetric survey was carried out. Subsequently a benthic lander was deployed which was equipped for a period of 2 to 4 days to measure near bed hydrography and sediment transport. This was followed by seismic and video surveys.The initial results of the cruise indicate that at all proposed drilling sites carbonate mounds with a total thickness that can be penetrated by the MeBo are present. The video observations did not reveal the presence of any rough terrain that may hamper the positioning of the MeBo at the seabed

A physical approach on flood risk vulnerability of buildings

The design of efficient hydrological risk mitigation strategies and their subsequent implementation relies on a careful vulnerability analysis of the elements exposed. Recently, extensive research efforts were undertaken to develop and refine empirical relationships linking the structural vulnerability of buildings to the impact forces of the hazard processes. These empirical vulnerability functions allow estimating the expected direct losses as a result of the hazard scenario based on spatially explicit representation of the process patterns and the elements at risk classified into defined typological categories. However, due to the underlying empiricism of such vulnerability functions, the physics of the damage-generating mechanisms for a well-defined element at risk with its peculiar geometry and structural characteristics remain unveiled, and, as such, the applicability of the empirical approach for planning hazard-proof residential buildings is limited. Therefore, we propose a conceptual assessment scheme to close this gap. This assessment scheme encompasses distinct analytical steps: modelling (a) the process intensity, (b) the impact on the element at risk exposed and (c) the physical response of the building envelope. Furthermore, these results provide the input data for the subsequent damage evaluation and economic damage valuation. This dynamic assessment supports all relevant planning activities with respect to a minimisation of losses, and can be implemented in the operational risk assessment procedure

Automated snow avalanche release area delineation – validation of existing algorithms and proposition of a new object-based approach for large-scale hazard indication mapping

Snow avalanche hazard is threatening people and infrastructure in all alpine regions with seasonal or permanent snow cover around the globe. Coping with this hazard is a big challenge and during the past centuries, different strategies were developed. Today, in Switzerland, experienced avalanche engineers produce hazard maps with a very high reliability based on avalanche database information, terrain analysis, climatological data sets and numerical modeling of the flow dynamics for selected avalanche tracks that might affect settlements. However, for regions outside the considered settlement areas such area-wide hazard maps are not available mainly because of the too high cost, in Switzerland and in most mountain regions around the world. Therefore, hazard indication maps, even though they are less reliable and less detailed, are often the only spatial planning tool available. To produce meaningful and cost-effective avalanche hazard indication maps over large regions (regional to national scale), automated release area delineation has to be combined with volume estimations and state-of-the-art numerical avalanche simulations.In this paper we validate existing potential release area (PRA) delineation algorithms, published in peer-reviewed journals, that are based on digital terrain models and their derivatives such as slope angle, aspect, roughness and curvature. For validation, we apply avalanche data from three different ski resorts in the vicinity of Davos, Switzerland, where experienced ski-patrol staff have mapped most avalanches in detail for many years. After calculating the best fit input parameters for every tested algorithm, we compare their performance based on the reference data sets. Because all tested algorithms do not provide meaningful delineation between individual PRAs, we propose a new algorithm based on object-based image analysis (OBIA). In combination with an automatic procedure to estimate the average release depth (d0), defining the avalanche release volume, this algorithm enables the numerical simulation of thousands of avalanches over large regions applying the well-established avalanche dynamics model RAMMS. We demonstrate this for the region of Davos for two hazard scenarios, frequent (10–30-year return period) and extreme (100–300-year return period). This approach opens the door for large-scale avalanche hazard indication mapping in all regions where high-quality and high-resolution digital terrain models and snow data are available.</p

Calcium Homeostasis in Myogenic Differentiation Factor 1 (MyoD)-Transformed, Virally-Transduced, Skin-Derived Equine Myotubes

Dysfunctional skeletal muscle calcium homeostasis plays a central role in the pathophysiology of several human and animal skeletal muscle disorders, in particular, genetic disorders associated with ryanodine receptor 1 (RYR1) mutations, such as malignant hyperthermia, central core disease, multiminicore disease and certain centronuclear myopathies. In addition, aberrant skeletal muscle calcium handling is believed to play a pivotal role in the highly prevalent disorder of Thoroughbred racehorses, known as Recurrent Exertional Rhabdomyolysis. Traditionally, such defects were studied in human and equine subjects by examining the contractile responses of biopsied muscle strips exposed to caffeine, a potent RYR1 agonist. However, this test is not widely available and, due to its invasive nature, is potentially less suitable for valuable animals in training or in the human paediatric setting. Furthermore, increasingly, RYR1 gene polymorphisms (of unknown pathogenicity and significance) are being identified through next generation sequencing projects. Consequently, we have investigated a less invasive test that can be used to study calcium homeostasis in cultured, skin-derived fibroblasts that are converted to the muscle lineage by viral transduction with a MyoD (myogenic differentiation 1) transgene. Similar models have been utilised to examine calcium homeostasis in human patient cells, however, to date, there has been no detailed assessment of the cells’ calcium homeostasis, and in particular, the responses to agonists and antagonists of RYR1. Here we describe experiments conducted to assess calcium handling of the cells and examine responses to treatment with dantrolene, a drug commonly used for prophylaxis of recurrent exertional rhabdomyolysis in horses and malignant hyperthermia in humans

Obesity and osteoarthritis in knee, hip and/or hand: An epidemiological study in the general population with 10 years follow-up

<p>Abstract</p> <p>Background</p> <p>Obesity is one of the most important risk factors for osteoarthritis (OA) in knee(s). However, the relationship between obesity and OA in hand(s) and hip(s) remains controversial and needs further investigation. The purpose of this study was to investigate the impact of obesity on incident osteoarthritis (OA) in hip, knee, and hand in a general population followed in 10 years.</p> <p>Methods</p> <p>A total of 1854 people aged 24–76 years in 1994 participated in a Norwegian study on musculoskeletal pain in both 1994 and 2004. Participants with OA or rheumatoid arthritis in 1994 and those above 74 years in 1994 were excluded, leaving n = 1675 for the analyses. The main outcome measure was OA diagnosis at follow-up based on self-report. Obesity was defined by a body mass index (BMI) of 30 and above.</p> <p>Results</p> <p>At 10-years follow-up the incidence rates were 5.8% (CI 4.3–7.3) for hip OA, 7.3% (CI 5.7–9.0) for knee OA, and 5.6% (CI 4.2–7.1) for hand OA. When adjusting for age, gender, work status and leisure time activities, a high BMI (> 30) was significantly associated with knee OA (OR 2.81; 95%CI 1.32–5.96), and a dose-response relationship was found for this association. Obesity was also significantly associated with hand OA (OR 2.59; 1.08–6.19), but not with hip OA (OR 1.11; 0.41–2.97). There was no statistically significant interaction effect between BMI and gender, age or any of the other confounding variables.</p> <p>Conclusion</p> <p>A high BMI was significantly associated with knee OA and hand OA, but not with hip OA.</p