Halving the Casimir force with conductive oxides

The possibility to modify the strength of the Casimir effect by tailoring the dielectric functions of the interacting surfaces is regarded as a unique opportunity in the development of Micro- and NanoElectroMechanical Systems. In air, however, one expects that, unless noble metals are used, the electrostatic force arising from trapped charges overcomes the Casimir attraction, leaving no room for exploitation of Casimir force engineering at ambient conditions. Here we show that, in the presence of a conductive oxide, the Casimir force can be the dominant interaction even in air, and that the use of conductive oxides allows one to reduce the Casimir force up to a factor of 2 when compared to noble metals.Comment: modified version, accepted for publication in Phys Rev Let

Interplay between antiferromagnetic order and spin polarization in ferromagnetic metal/electron-doped cuprate superconductor junctions

Recently we proposed a theory of point-contact spectroscopy and argued that the splitting of zero-bias conductance peak (ZBCP) in electron-doped cuprate superconductor point-contact spectroscopy is due to the coexistence of antiferromagnetic (AF) and d-wave superconducting orders [Phys. Rev. B {\bf 76}, 220504(R) (2007)]. Here we extend the theory to study the tunneling in the ferromagnetic metal/electron-doped cuprate superconductor (FM/EDSC) junctions. In addition to the AF order, the effects of spin polarization, Fermi-wave vector mismatch (FWM) between the FM and EDSC regions, and effective barrier are investigated. It is shown that there exits midgap surface state (MSS) contribution to the conductance to which Andreev reflections are largely modified due to the interplay between the exchange field of ferromagnetic metal and the AF order in EDSC. Low-energy anomalous conductance enhancement can occur which could further test the existence of AF order in EDSC. Finally, we propose a more accurate formula in determining the spin polarization value in combination with the point-contact conductance data.Comment: 9 pages, 8 figure

High-Q nested resonator in an actively stabilized optomechanical cavity

Experiments involving micro- and nanomechanical resonators need to be carefully designed to reduce mechanical environmental noise. A small scale on-chip approach is to add an additional resonator to the system as a mechanical low-pass filter. Unfortunately, the inherent low frequency of the low-pass filter causes the system to be easily excited mechanically. Fixating the additional resonator ensures that the resonator itself can not be excited by the environment. This, however, negates the purpose of the low-pass filter. We solve this apparent paradox by applying active feedback to the resonator, thereby minimizing the motion with respect the front mirror of an optomechanical cavity. Not only does this method actively stabilize the cavity length, but it also retains the on-chip vibration isolation.Comment: Minor adjustments mad

Development of a high-sensitivity torsion balance to investigate the thermal Casimir force

We report development of a high-sensitivity torsion balance to measure the thermal Casimir force. Special emphasis is placed on experimental investigations of a possible surface electric force originating from surface patch potentials that have been recently noticed by several experimental groups. By gaining a proper understanding of the actual contribution of the surface electric force in real materials, we aim to undertake precision force measurements to resolve the Casimir force at finite temperature in real metals, as well as in other semiconducting materials, such as graphene.Comment: Proceedings of the 10th International Conference "Quantum Field Theory Under the Influence of External Conditions"; 11 pages and 4 figure

Continuous flushing of the bladder in rodents reduces artifacts and improves quantification in molecular imaging

In this study, we evaluated the partial volume effect (PVE) of 2-deoxy-2-[18F]fluoro-d-glucose (18F-FDG) tracer accumulation in the bladder on the positron emission tomographic (PET) image quantification in mice and rats suffering from inflammatory bowel disease. To improve the accuracy, we implemented continuous bladder flushing procedures. Female mice and rats were scanned using microPET/computed tomography (CT) at baseline and after induction of acute colitis by injecting 2,4,6-trinitrobenzene sulfonic acid (TNBS) intrarectally. During the scans, the bladder was continuously flushed in one group, whereas in the other group, no bladder flushing was performed. As a means of in vivo and ex vivo validation of the inflammation, animals also underwent colonoscopy and were sacrificed for gamma counting (subpopulation) and to score the colonic damage both micro- and macroscopically as well as biochemically. At baseline, the microPET signal in the colon of both mice and rats was significantly higher in the nonflushed group compared to the flushed group, caused by the PVE of tracer activity in the bladder. Hence, the colonoscopy and postmortem analyses showed no significant differences at baseline between the flushed and nonflushed animals. TNBS induced significant colonic inflammation, as revealed by colonoscopic and postmortem scores, which was not detected by microPET in the mice without bladder flushing, again because of spillover of bladder activity in the colonic area. MicroPET in bladder-flushed animals did reveal a significant increase in 18F-FDG uptake. Correlations between microPET and colonoscopy, macroscopy, microscopy, and myeloperoxidase yielded higher Spearman rho values in mice with continuously flushed bladders during imaging. Comparable, although somewhat less pronounced, results were shown in the rat. Continuous bladder flushing reduced image artifacts and is mandatory for accurate image quantification in the pelvic region for both mice and rats. We designed and validated experimental protocols to facilitate such.Steven Deleye, Marthe Heylen, Annemie Deiteren, Joris De Man, Sigrid Stroobants, Benedicte De Winter, and Steven Staelen

SAFE: A System for Extraction and Retrieval of Semantic Audio Descriptors

date-added: 2014-08-02 10:04:50 +0000 date-modified: 2014-11-26 17:42:49 +0000 keywords: semantic audio, VST plugins, data collection, ISMIR demoIn this paper, we present an overview of the Semantic Audio Feature Extraction (SAFE) Project, a system for the extraction and retrieval of semantic descriptions of musical timbre, deployed within the digital audio workstation. By embedding the data capture system into the music production workflow, we are able to maximise the return of semantically annotated music production data, whilst mit- igating against issues such as musical and environmental bias. Users of the plugins are free to submit semantic de- scriptions of their own music, whilst utilising the continually growing collaborative dataset of musical descriptors. In order to provide more contextually representative timbral transformations, the dataset is partitioned using metadata, captured within the application

Influence of preload and nonlinearity of railpads on vibration of railway tracks under stationary and moving harmonic loads

In railway track dynamics, the stiffness and damping properties of railpads have a significant effect on track vibration, decay rates as well forces transmitted to the track supporting structure. Many studies have shown that railpads exhibit pronounced nonlinear behaviour, with preload and frequency dependent properties. This paper presents a three parameter railpad model, together with its differential equation of motion and the required model parameters obtained from experimental data. A time domain model of a rail discretely supported on these railpads is then formulated using the finite element method. The model is subjected to static and dynamic loading in order to study the effects of preload and frequency on its dynamic behaviour. Results are shown as time histories and frequency spectra for the track displacements and reaction forces for various preload levels. They emphasise the necessity of accounting for nonlinear behaviour based on the large disparities (up to 20 dB) observed between the linear and nonlinear cases for the parameters used in this study

Prospective Analysis in GIST Patients on the Role of Alpha-1 Acid Glycoprotein in Imatinib Exposure

Background: For imatinib, a relationship between systemic exposure and clinical outcome has been suggested. Importantly, imatinib concentrations are not stable and decrease over time, for which several mechanisms have been suggested. In this study, we investigated if a decrease in alpha-1 acid glycoprotein (AGP) is the main cause of the lowering in imatinib exposure over time. Methods: We prospectively measured imatinib trough concentration (Cmin) values in 28 patients with gastrointestinal stromal tumours, at 1, 3 and 12 months after the start of imatinib treatment. At the same time points, AGP levels were measured. Results: Overall, imatinib Cmin and AGP levels were correlated (r2 = 0.656; P < 0.001). However, AGP levels did not fluctuate significantly over time, nor did the change in AGP levels correlate with the change in the imatinib Cmin. Conclusion: We showed that systemic AGP levels are not likely to be a key player in the decrease in systemic imatinib exposure over time. As long as intra-individual changes in imatinib exposure remain unexplained, researchers should standardize the sampling times for imatinib in order to be able to assess the clinical applicability of therapeutic drug monitoring