Annealing effect of hybrid solar cells based on poly (3-hexylthiophene) and zinc-oxide nanostructures

The structural growth and optical and photovoltaic properties of the organic–inorganic hybrid structures of zinc oxide (ZnO)-nanorods/poly-3-hexylthiophene (P3HT) and two variations of organic polymer blends of ZnO/ P3HT:C60 fullerene and ZnO/P3HT:6,6]-phenyl C61 butyric acid methyl ester were studied in detail during thermal annealing. The ordering of the P3HT nanocrystals increased during annealing, which also improved hole transport in the hybrid structures. The optical constants of the ZnO/P3HT:[6,6]-phenyl C61 butyric acid methyl ester (PCBM) films elevated with annealing temperature due to the improved crystallisation induced by the formation of P3HT crystalline domains. As a result, a maximum power conversion efficiency of approximately 1.03% was achieved for the annealed ZnO/P3HT:PCBM device at 140 °C. These findings indicate that ZnO-nanorods/P3HT:PCBM films are stable at temperatures up to 160 °C.Web of Scienc

Evaluating Feruloyl Esterase—Xylanase Synergism for Hydroxycinnamic Acid and Xylo-Oligosaccharide Production from Untreated, Hydrothermally Pre-Treated and Dilute-Acid Pre-Treated Corn Cobs:

Agricultural residues are considered the most promising option as a renewable feedstock for biofuel and high valued-added chemical production due to their availability and low cost. The efficient enzymatic hydrolysis of agricultural residues into value-added products such as sugars and hydroxycinnamic acids is a challenge because of the recalcitrant properties of the native biomass. Development of synergistic enzyme cocktails is required to overcome biomass residue recalcitrance, and achieve high yields of potential value-added products. In this study, the synergistic action of two termite metagenome-derived feruloyl esterases (FAE5 and FAE6), and an endo-xylanase (Xyn11) from Thermomyces lanuginosus, was optimized using 0.5% (w/v) insoluble wheat arabinoxylan (a model substrate) and then applied to 1% (w/v) corn cobs for the efficient production of xylo-oligosaccharides (XOS) and hydroxycinnamic acids

Unraveling synergism between various GH family xylanases and debranching enzymes during hetero-xylan degradation

Enzymes classified with the same Enzyme Commission (EC) that are allotted in different glycoside hydrolase (GH) families can display different mechanisms of action and substrate specificities. Therefore, the combination of different enzyme classes may not yield synergism during biomass hydrolysis, as the GH family allocation of the enzymes influences their behavior. As a result, it is important to understand which GH family combinations are compatible to gain knowledge on how to efficiently depolymerize biomass into fermentable sugars. We evaluated GH10 (Xyn10D and XT6) and GH11 (XynA and Xyn2A) β-xylanase performance alone and in combination with various GH family α-l-arabinofuranosidases (GH43 AXH-d and GH51 Abf51A) and α-d-glucuronidases (GH4 Agu4B and GH67 AguA) during xylan depolymerization. No synergistic enhancement in reducing sugar, xylose and glucuronic acid released from beechwood xylan was observed when xylanases were supplemented with either one of the glucuronidases, except between Xyn2A and AguA (1.1-fold reducing sugar increase). However, overall sugar release was significantly improved (≥1.1-fold reducing sugar increase) when xylanases were supplemented with either one of the arabinofuranosidases during wheat arabinoxylan degradation. Synergism appeared to result from the xylanases liberating xylo-oligomers, which are the preferred substrates of the terminal arabinofuranosyl-substituent debranching enzyme, Abf51A, allowing the exolytic β-xylosidase, SXA, to have access to the generated unbranched xylo-oligomers. Here, it was shown that arabinofuranosidases are key enzymes in the efficient saccharification of hetero-xylan into xylose. This study demonstrated that consideration of GH family affiliations of the carbohydrate-active enzymes (CAZymes) used to formulate synergistic enzyme cocktails is crucial for achieving efficient biomass saccharification.The National Research Foundation of South Africa (NRF) and the Department of Science and Technology (DST)/Council for Scientific and Industrial Research (CSIR) Masters and PhD bursarie. Article Processing charges (APC) were funded by The University of the Free State.https://www.mdpi.com/journal/moleculesam2022BiochemistryGeneticsMicrobiology and Plant Patholog

Covalent immobilisation of an Aspergillus niger derived endo-1,4-beta-mannanase, man26A, on glutaraldehyde-activated chitosan nanoparticles for the effective production of prebiotic MOS from soybean meal

An Aspergillus niger endo-1,4- -mannanase, Man26A, was confirmed by FTIR and XRD to be immobilised on glutaraldehyde-activated chitosan nanoparticles via covalent bonding. The immobilisation (%) and activity yields (%) were 82.25% and 20.75%, respectively. The biochemical properties (pH, temperature optima, and stability) were then comparatively evaluated for both the free and immobilised Man26A. The optimal activity of Man26A shifted to a lower pH after immobilisation (pH 2.0–3.0, from pH 5 for the free enzyme), with the optimum temperature remaining unchanged (60 C). The two enzymes exhibited identical thermal stability, maintaining 100% activity for the first 6 h at 55 C. Substrate-specific kinetic analysis showed that the two enzymes had similar affinities towards locust bean gum (LBG) with varied Vmax values. In contrast, they showed various affinities towards soybean meal (SBM) and similar Vmax values. The immobilised enzyme was then employed in the enhancement of the functional feed/prebiotic properties of SBM from poultry feed, increasing mannooligosaccharides (MOS) quantities. The SBM main hydrolysis products were mannobiose (M2) and mannose (M1). The SBM-produced sugars could be utilised as a carbon source by probiotic bacteria; Streptococcus thermophilus, Bacillus subtilis, and Lactobacillus bulgaricus. The results indicate that the immobilised enzyme has the potential for use in the sustainable and cost-effective production of prebiotic MOS from agricultural biomass.Rhodes University’s Research Council (RC) grant and a Rated Researcher Grant (RRG).https://www.mdpi.com/journal/agronomyam2023BiochemistryGeneticsMicrobiology and Plant Patholog

Self-Catalytic Growth of Tin Oxide Nanowires by Chemical Vapor Deposition Process

We report on the synthesis of tin oxide (SnO 2 ) nanowires by a chemical vapor deposition (CVD) process. Commercially bought SnO nanopowders were vaporized at 1050 ∘ C for 30 minutes with argon gas continuously passing through the system. The assynthesized products were characterized using UV-visible absorption spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM). The band gap of the nanowires determined from UV-visible absorption was around 3.7 eV. The SEM micrographs revealed "wool-like" structure which contains nanoribbons and nanowires with liquid droplets at the tips. Nanowires typically have diameter in the range of 50-200 nm and length 10-100 m. These nanowires followed the vapor-liquid-solid (VLS) growth mechanism

A novel dimeric exoglucanase (GH5_38)

An exoglucanase (Exg-D) from the glycoside hydrolase family 5 subfamily 38 (GH5_38) was heterologously expressed and structurally and biochemically characterised at a molecular level for its application in alkyl glycoside synthesis. The purified Exg-D existed in both dimeric and monomeric forms in solution, which showed highest activity on mixed-linked β-glucan (88.0 and 86.7 U/mg protein, respectively) and lichenin (24.5 and 23.7 U/mg protein, respectively). They displayed a broad optimum pH range from 5.5 to 7 and a temperature optimum from 40 to 60 °C. Kinetic studies demonstrated that Exg-D had a higher affinity towards β-glucan, with a Km of 7.9 mg/mL and a kcat of 117.2 s−1, compared to lichenin which had a Km of 21.5 mg/mL and a kcat of 70.0 s−1. The circular dichroism profile of Exg-D showed that its secondary structure consisted of 11% α-helices, 36% β-strands and 53% coils. Exg-D performed transglycosylation using p-nitrophenyl cellobioside as a glycosyl donor and several primary alcohols as acceptors to produce methyl-, ethyl- and propyl-cellobiosides. These products were identified and quantified via thin-layer chromatography (TLC) and liquid chromatography–mass spectrometry (LC-MS). We concluded that Exg-D is a novel and promising oligomeric glycoside hydrolase for the one-step synthesis of alkyl glycosides with more than one monosaccharide unit

Hydrogen Epoch of Reionization Array (HERA)

The Hydrogen Epoch of Reionization Array (HERA) is a staged experiment to measure 21 cm emission from the primordial intergalactic medium (IGM) throughout cosmic reionization ($z=6-12$), and to explore earlier epochs of our Cosmic Dawn ($z\sim30$). During these epochs, early stars and black holes heated and ionized the IGM, introducing fluctuations in 21 cm emission. HERA is designed to characterize the evolution of the 21 cm power spectrum to constrain the timing and morphology of reionization, the properties of the first galaxies, the evolution of large-scale structure, and the early sources of heating. The full HERA instrument will be a 350-element interferometer in South Africa consisting of 14-m parabolic dishes observing from 50 to 250 MHz. Currently, 19 dishes have been deployed on site and the next 18 are under construction. HERA has been designated as an SKA Precursor instrument. In this paper, we summarize HERA's scientific context and provide forecasts for its key science results. After reviewing the current state of the art in foreground mitigation, we use the delay-spectrum technique to motivate high-level performance requirements for the HERA instrument. Next, we present the HERA instrument design, along with the subsystem specifications that ensure that HERA meets its performance requirements. Finally, we summarize the schedule and status of the project. We conclude by suggesting that, given the realities of foreground contamination, current-generation 21 cm instruments are approaching their sensitivity limits. HERA is designed to bring both the sensitivity and the precision to deliver its primary science on the basis of proven foreground filtering techniques, while developing new subtraction techniques to unlock new capabilities. The result will be a major step toward realizing the widely recognized scientific potential of 21 cm cosmology.Comment: 26 pages, 24 figures, 2 table

Revival of the magnetar PSR J1622-4950: observations with MeerKAT, Parkes, XMM-Newton, Swift, Chandra, and NuSTAR

New radio (MeerKAT and Parkes) and X-ray (XMM-Newton, Swift, Chandra, and NuSTAR) observations of PSR J1622-4950 indicate that the magnetar, in a quiescent state since at least early 2015, reactivated between 2017 March 19 and April 5. The radio flux density, while variable, is approximately 100x larger than during its dormant state. The X-ray flux one month after reactivation was at least 800x larger than during quiescence, and has been decaying exponentially on a 111+/-19 day timescale. This high-flux state, together with a radio-derived rotational ephemeris, enabled for the first time the detection of X-ray pulsations for this magnetar. At 5%, the 0.3-6 keV pulsed fraction is comparable to the smallest observed for magnetars. The overall pulsar geometry inferred from polarized radio emission appears to be broadly consistent with that determined 6-8 years earlier. However, rotating vector model fits suggest that we are now seeing radio emission from a different location in the magnetosphere than previously. This indicates a novel way in which radio emission from magnetars can differ from that of ordinary pulsars. The torque on the neutron star is varying rapidly and unsteadily, as is common for magnetars following outburst, having changed by a factor of 7 within six months of reactivation.Comment: Published in ApJ (2018 April 5); 13 pages, 4 figure

Comparative study: the effect of annealing conditions on the properties of P3HT:PCBM blends

This paper presents a detailed study on the role of various annealing treatments on organic poly(3-hexylthiophene) and [6]-phenyl-C61-butyric acid methyl ester blends under different experimental conditions. A combination of analytical tools is used to study the alteration of the phase separation, structure and photovoltaic properties of the P3HT:PCBM blend during the annealing process. Results showed that the thermal annealing yields PCBM ‘‘needle-like’’ crystals and that prolonged heat treatment leads to extensive phase separation, as demonstrated by the growth in the size and quantity of PCBM crystals. The substrate annealing method demonstrated an optimal morphology by eradicating and suppressing the formation of fullerene clusters across the film, resulting in longer P3HT fibrils with smaller diameter. Improved optical constants, PL quenching and a decrease in the P3HT optical bad-gap were demonstrated for the substrate annealed films due to the limited diffusion of the PCBM molecules. An effective strategy for determining an optimized morphology through substrate annealing treatment is therefore revealed for improved device efficiency.Web of Scienc