Wear rates in urban rail systems

A significant part of maintenance costs in urban rail systems (metro, tram, light rapid transit/light metro) is due to wheel-rail wear. Wear rates - measured for example as depth of wear per kilometre run (rolling stock) or per train passage (rails) - depend in a complex manner on several influence factors. Among the most important are key design factors of the rolling stock (wheel profiles, suspension characteristics), of the track (distribution of curve radii, characteristics of switches and crossings, rail profiles), of the wheel-rail interface (lubrication, materials in contact, ambient characteristics), and of operations (frequency of traction and braking, trainset inversion policy, maintenance policy etc.). When designing an urban rail system, all of these factors have to be under control in order to limit the costs due to wheel/rail reprofiling/grinding and replacement. The state of the art allows the calculation of wear rates given quantitative input regarding the above factors. However, it is difficult to find in the literature experimental values for calibration of wear models and indications on what is a reasonable state-of-the-art wear rate for any given type of urban rail system. In this paper we present a structured analysis of flange wear rates found in the literature and derived from the experience of the authors, for a variety of cases, including metros and mainline rail systems. We compare the wear rates and explain their relationship with the influence factors. We then relate the wear rates with the needs in terms of wheel reprofiling/replacement. We estimate ranges for the calibration coefficients of wear models. We present the results in a way as to allow the designer of urban rail systems to derive values for target wear rates according to their specific conditions without the need for complex simulations

Variation in Environmental Parameters in Research and Aquaculture: Effects on Behaviour, Physiology and Cell Biology of Teleost Fish

Over the last few years the increasing use of fish as animal models in scientific research and the increased fish breeding for human consumption have stressed the need for more knowledge on the effect of variations in environmental parameters on fish biology and on the welfare of specimens used both in research and aquaculture contexts. Experimental evidence shows that environmental variations can affect fish biology at various levels, from the molecular to that of the population, sometimes in a different way depending on the species considered. In order to achieve reproducible results in experiments involving fish it is necessary to set and maintain all environmental parameters constant at the optimal value to guarantee the wellness of the animal. The effects of the variation in environmental parameters on the behaviour, physiology and cell biology of teleosts are here discussed in order to provide useful information for research based on fish models

Consistent Image Decoding from Multiple Lossy Versions

With the recent development of tools for data sharing in social networks and peer to peer networks, the same information is often stored in different nodes. Peer-to-peer protocols usually allow one user to collect portions of the same file from different nodes in the network, substantially improving the rate at which data are received by the end user. In some cases, however, the same multimedia document is available in different lossy versions on the network nodes. In such situations, one may be interested in collecting all available versions of the same document and jointly decoding them to obtain a better reconstruction of the original. In this paper we study some methods to jointly decode different versions of the same image. We compare different uses of the method of Projections Onto Convex Sets (POCS) with some Convex Optimization techniques in order to reconstruct an image for which JPEG and JPEG2000 lossy versions are available

Feeding behaviour of larval European sea bass (Dicentrarchus labrax L.) in relation to temperature and prey density

The feeding behaviour of larval European sea bass (Dicentrarchus labrax, L.) was analysed in relation to temperature and prey density under controlled laboratory conditions with the aim to assess the ability of larval fish to change the feeding tactic as a response to environmental changes. Larvae were acclimated for 20 days at three different temperatures (19, 22 and 26°C), and their feeding behaviour was then video-recorded in experimental trials, at two prey densities, consisting of swarms of 400/l and 1440/l Artemia nauplii. Results showed that there was a significant effect of the interaction between temperature and prey density on the proportion of swimming activity that was reduced at the high temperature-high prey density combination. This suggested a switching in the larval feeding behaviour from an active to an ambush tactic, when the temperature reached 26°C and the prey density was 1440 /l Artemia nauplii. These results are consistent with the current literature on fish larval behaviour in showing that the foraging tactic can be modulated by the interaction of different abiotic and biotic factors characterising the rearing environment

An analysis method of the vortex-induced vibrations of a tethered sphere

Vortex-induced vibrations (VIV) in systems with more than one degree of freedom often present complex synchronization among the motion components, also hidden by the randomness that characterizes the motion itself. A phase average method has been here developed and applied to the displacements of a tethered sphere, at low mass and damping, to analyze its xy trajectories over a wide range of reduced velocities, 5 ≤ U* ≤ 25 (Reynolds numbers, 5.1 × 103 ≤ Re ≤ 2.67 × 104). This method has allowed the identification of both the periodic and chaotic contribution of each motion component, accurately reconstructing the underlying trajectory periodic pattern. The two classical vibration modes, I and II, have been also observed. The method developed here was able to better rebuild the experimental data compared to other methods found in the relevant literature, providing useful insights into the study of the dynamic response of a freely-oscillating tethered sphere immersed in a steady flow

Interspecific aggression and food competition between the global invader Palaemon macrodactylus and the native Palaemon elegans

The impact of invasive alien species on native communities can act at different levels both by affecting the ecosystem’s structure (i.e., mainly in the case of vegetation) and through direct interactions (i.e., competition for food or space). Behavioral studies under controlled conditions can provide relevant information on both the invasive potential of alien species and the potential impact of the invaders on the local native species. In the laboratory, the competition for food resources between the invasive oriental shrimp Palaemon macrodactylus, Rathbun, 1902, and the Mediterranean native shrimp Palaemon elegans, Rathke, 1836, was analyzed. These species are typical residents of coastal transitional and estuarine waters, so the experiments were carried out using two salinity conditions that characterize the coastal lagoon of Venice. Although at both salinity treatments the alien species tended to be more aggressive than the native one, significant differences between the two species were mainly observed at a salinity of 30. In particular, at a salinity of 30, P. macrodactylus spent more time attending to the food source than the native species. The results are discussed in light of the potential inter-specific competition between the two species within the conditions of the Venice lagoon

Comparing activity and space patterns of the European pond turtle, Emys orbicularis (L., 1758) in a Venice Lagoon wetland area: implications for conservation planning and management

Behavioural and spatial distribution analyses were quantified during a phase of activity and lethargy in a wild population of the European pond turtle inhabiting a protected internal wetland area of the Venice lagoon. The marked individuals (13 males and 16 females) provided informative radiotracking data to study differential patterns of activity, dispersion and habitat use between the two study periods ("October-November both 2019 and 2020" and "June-July 2020"). The differences in the movements behaviours and habitat selection were affected by period. Movements were higher in the period of activity than lethargy, but they were not influenced by sex and size. The presence of the European pond turtle in the transitional woodland/shrubs and brackish water valley habitats was significantly higher in the period of activity than lethargy. During the latter one, pond turtles were observed to brumate gregariously in a small area for brumation, usually in shallow water. In contrast, all individuals have changed water bodies during the activity period. Part of those movements has occurred towards aquatic habitat with higher salinities 1-17%o (mean: 10.64%o). These findings provide a set of information to better understand the behavioural ecology of Emys orbicularis in the lagoon area. This is of relevance for management actions and for the conservation of this threatened species

Local structural studies of Ba1−x_{1-x}Kx_xFe2_2As2_2 using atomic pair distribution function analysis

Systematic local structural studies of Ba$_{1-x}$K$_x$Fe$_2$As$_2$ system are undertaken at room temperature using atomic pair distribution function (PDF) analysis. The local structure of the Ba$_{1-x}$K$_x$Fe$_2$As$_2$ is found to be well described by the long-range structure extracted from the diffraction experiments, but with anisotropic atomic vibrations of the constituent atoms ($U_{11}$ = $U_{22} \ne U_{33}$). The crystal unit cell parameters, the FeAs$_4$ tetrahedral angle and the pnictogen height above the Fe-plane are seen to show systematic evolution with K doping, underlining the importance of the structural changes, in addition to the charge doping, in determining the properties of Ba$_{1-x}$K$_x$Fe$_2$As$_2$

Experiments and modeling of the growth of C. sorokiniana in lab batch and BIOCOIL photobioreactors for lipid production

A novel mathematical model for the quantitative assessment of the effect of dissolved nitrogen on the autotrophic batch-growth and lipid accumulation of C. sorokiniana, is proposed in this work. Model results have been validated through comparison with suitable experimental data performed in lab photobioreactors. Further experiments have been then performed using a BIOCOIL operated in fed-batch mode. The experimental results have been successfully predicted through the proposed model. Therefore, the model might represent a first step toward the development of a tool for the scale-up and optimization of the operating conditions of BIOCOIL photobioreactors. Furthermore, the fatty acid methyl esters obtained by transesterification of lipids extracted from C. sorokiniana, have been analysed in view of the assessment of their usability for producing biofuels. Subsequently, on the basis of the fatty acids profile, a wide range of biodiesel fuel properties have been predicted through suitable software

Evidence of a pressure-induced metallization process in monoclinic VO2_2

Raman and combined trasmission and reflectivity mid infrared measurements have been carried out on monoclinic VO$_2$ at room temperature over the 0-19 GPa and 0-14 GPa pressure ranges, respectively. The pressure dependence obtained for both lattice dynamics and optical gap shows a remarkable stability of the system up to P*$\sim$10 GPa. Evidence of subtle modifications of V ion arrangements within the monoclinic lattice together with the onset of a metallization process via band gap filling are observed for P$>$P*. Differently from ambient pressure, where the VO$_2$ metal phase is found only in conjunction with the rutile structure above 340 K, a new room temperature metallic phase coupled to a monoclinic structure appears accessible in the high pressure regime, thus opening to new important queries on the physics of VO$_2$.Comment: 5 pages, 3 figure