2,304 research outputs found
Primary arm spacing in chill block melt spun Ni-Mo alloys
Chill block melt spun ribbons of Ni-Mo binary alloys containing 8.0 to 41.8 wt % Mo have been prepared under carefully controlled processing conditions. The growth velocity has been determined as a function of distance from the quench surface from the observed ribbon thickness dependence on the melt puddle residence time. Primary arm spacings measured at the midribbon thickness locations show a dependence on growth velocity and alloy composition which is expected from dendritic growth models for binary alloys directionally solidified in a positive temperature gradient
Angle-resolved photoemission spectra in the cuprates from the d-density wave theory
Angle-resolved photoemission spectra present two challenges for the d-density
wave (DDW) theory of the pseudogap state of the cuprates: (1) hole pockets near
are not observed, in apparent contradiction with the assumption
of translational symmetry breaking, and (2) there are no well-defined
quasiparticles at the {\it antinodal} points, in contradiction with the
predictions of mean-field theory of this broken symmetry state. Here, we show
how these puzzles can be resolved.Comment: 4 pages, 3 eps figures, RevTex
Dissipate locally, couple globally: a sharp transition from decoupling to infinite range coupling in Josephson arrays with on-site dissipation
We study the T=0 normal to superconducting transition of Josephson arrays
with {\it on-site} dissipation. A perturbative renormalization group solution
is given. Like the previously studied case of {\it bond} dissipation (BD), this
is a "floating" to coupled (FC) phase transition. {\it Unlike} the BD
transition, at which {\it only} nearest-neighbor couplings become relevant,
here {\it all} inter-grain couplings, out to {\it infinitely} large distances,
do so simultaneously. We predict, for the first time in an FC transition, a
diverging spatial correlation length. Our results show the robustness of
floating phases in dissipative quantum systems.Comment: 7+ pages, 3 eps figures, Europhysics Letters preprint format, as
publishe
Microstructures in rapidly solidified Ni-Mo alloys
Ni-Mo alloys of compositions ranging from pure Ni to Ni-40 at % Mo were rapidly solidified by Chill Block Melt Spinning in vacuum and were examined by optical metallography, X-ray diffraction and transmission electron microscopy. Rapid solidification resulted in an extension of molybdenum solubility in nickel from 28 to 37.5 at %. A number of different phases and microstructures were seen at different depths (solidification conditions) from the quenched surface of the melt spun ribbons
The nature and boundary of the floating phase in a dissipative Josephson junction array
We study the nature of correlations within, and the transition into, the
floating phase of dissipative Josephson junction arrays. Order parameter
correlations in this phase are long-ranged in time, but only short-ranged in
space. A perturbative RG analysis shows that, in {\it arbitrary} spatial
dimension, the transition is controlled by a continuous locus of critical fixed
points determined entirely by the \textit{local} topology of the lattice. This
may be the most natural example of a line of critical points existing in
arbitrary dimensions.Comment: Parts rewritten, typos correcte
A Socio-Clinical Profile Of Cases Of Laparoscopic Sterilization Performed At Institution And Camps
Research Question: What is the socio-clinical profile of cases of laparoscopic sterilization performed at the instiÂtution and camps. Objectives: To study the (1) socio-clinical aspect of laparoscopic ligations. (2) complications and the failure rate. Study Design: Longitudinal study. Setting: Females coming for sterilization at the O-.P.D. and post-partum centre. Participants: 9088 females of reproductive age group. Study Variables: Age group, social class, residence, education, number of living children. Outcome Variables: Proportion of women who came for sterilization, ligations performed at hospital. Results: Demographic characteristics showed that 5658 (62.2%) and 3430 (37.8%) were from rural and urban areas respectively. Socio-economically , 80% cases beÂlonged to low socio-enonomic class. As regards the literacy status, 5500 (60.5%) of the patients were illiterate and 2600 (28.6%) of them had received only primary education. The age group which commonly accepted sterilization in 5056 cases (55.6%) was 31-35 years. The parity in our study showing highest incidence of laparoligation. i.e. 36.17% was 5. Our complication rate was 0.5% and failure rate 0.6%. Conclusions: Our experience of about 15 years shows that laparoscopic sterilization is a simple, safe, easy method and acceptable to the rural and even illiterate masses in this region. In the event of pregnancy, this permanent method is more acceptabl
Life cycle studies of the hexose transporter of Plasmodium species and genetic validation of their essentiality
A Plasmodium falciparum hexose transporter (PfHT) has previously been shown to be a facilitative glucose and fructose transporter. Its expression in Xenopus laevis oocytes and the use of a glucose analogue inhibitor permitted chemical validation of PfHT as a novel drug target. Following recent re-annotations of the P. falciparum genome, other putative sugar transporters have been identified. To investigate further if PfHT is the key supplier of hexose to P. falciparum and to extend studies to different stages of Plasmodium spp., we functionally analysed the hexose transporters of both the human parasite P. falciparum and the rodent parasite Plasmodium berghei using gene targeting strategies. We show here the essential function of pfht for the erythrocytic parasite growth as it was not possible to knockout pfht unless the gene was complemented by an episomal construct. Also, we show that parasites are rescued from the toxic effect of a glucose analogue inhibitor when pfht is overexpressed in these transfectants. We found that the rodent malaria parasite orthologue, P. berghei hexose transporter (PbHT) gene, was similarly refractory to knockout attempts. However, using a single cross-over transfection strategy, we generated transgenic P. berghei parasites expressing a PbHT–GFP fusion protein suggesting that locus is amenable for gene targeting. Analysis of pbht-gfp transgenic parasites showed that PbHT is constitutively expressed through all the stages in the mosquito host in addition to asexual stages. These results provide genetic support for prioritizing PfHT as a target for novel antimalarials that can inhibit glucose uptake and kill parasites, as well as unveiling the expression of this hexose transporter in mosquito stages of the parasite, where it is also likely to be critical for survival
Undercooled and rapidly quenched Ni-Mo alloys
Hypoeutectic, eutectic, and hypereutectic nickel-molybdenum alloys were rapidly solidified by both bulk undercooling and melt spinning techniques. Alloys were undercooled in both electromagnetic levitation and differential thermal analysis equipment. The rate of recalescence depended upon the degree of initial undercooling and the nature (faceted or nonfaceted) of the primary nucleating phase. Alloy melts were observed to undercool more in the presence of primary Beta (NiMo intermetallic) phase than in gamma (fcc solid solution) phase. Melt spinning resulted in an extension of molybdenum solid solubility in gamma nickel, from 28 to 37.5 at % Mo. Although the microstructures observed by undercooling and melt spinning were similar the microsegregation pattern across the gamma dendries was different. The range of microstructures evolved was analyzed in terms of the nature of the primary phase to nucleate, its subsequent dendritic growth, coarsening and fragmentation, and final solidification of interfenderitic liquid
Effect of Cross-Section-Change Induced Advective Flow on the Primary Dendrite Array Morphology of Hypoeutectic Pb-Sb Alloys During Directional Solidification
The morphology and distribution of primary dendrites have been examined in Pb-2.2, 5.8 and 10.8 wt. pct. Sb alloy samples directionally solidified (DSed) in ampoules shaped like an hour-glass to examine the influence of cross-section change induced advective flow on the cellular/dendritic interface. This sample design increases the advective flow of the melt towards the array tips, as the liquid-solid interface enters the neck of the ampoule, and then decreases it as the interface exits the neck. The warm solute-rich melt flowing towards the growth front suppresses the extent of side-branching, decreases the primary dendrite spacing, and increases the primary dendrite trunk diameter as observed in the Pb-5.8 and 10.8 Sb alloys. The flow appears to suppress the formation of cells. A cellular interface growing in the Pb-2.2Sb alloy became planar as the solidification front entered the neck, becoming cellular again as it exited the neck
- …