Probing environment fluctuations by two-dimensional electronic spectroscopy of molecular systems at temperatures below 5 K

Citation: Rancova, O., Jankowiak, R., & Abramavicius, D. (2015). Probing environment fluctuations by two-dimensional electronic spectroscopy of molecular systems at temperatures below 5 K. Journal of Chemical Physics, 142(21), 18. doi:10.1063/1.4918584Two-dimensional (2D) electronic spectroscopy at cryogenic and room temperatures reveals excitation energy relaxation and transport, as well as vibrational dynamics, in molecular systems. These phenomena are related to the spectral densities of nuclear degrees of freedom, which are directly accessible by means of hole burning and fluorescence line narrowing approaches at low temperatures (few K). The 2D spectroscopy, in principle, should reveal more details about the fluctuating environment than the 1D approaches due to peak extension into extra dimension. By studying the spectral line shapes of a dimeric aggregate at low temperature, we demonstrate that 2D spectra have the potential to reveal the fluctuation spectral densities for different electronic states, the interstate correlation of static disorder and, finally, the time scales of spectral diffusion with high resolution. (C) 2015 AIP Publishing LLC

Perforation Analysis of the Aluminum Alloy Sheets Subjected to High Rate of Loading and Heated Using Thermal Chamber: Experimental and Numerical Approach

The analysis of the mechanical characteristics and dynamic behavior of aluminum alloy sheet due to perforation tests based on the experimental tests coupled with the numerical simulation is presented. The impact problems (penetration and perforation) of the metallic plates have been of interest for a long time. Experimental, analytical as well as numerical studies have been carried out to analyze in details the perforation process. Based on these approaches, the ballistic properties of the material have been studied. The initial and residual velocities laser sensor is used during experiments to obtain the ballistic curve and the ballistic limit. The energy balance is also reported together with the energy absorbed by the aluminum including the ballistic curve and ballistic limit. The high speed camera helps to estimate the failure time and to calculate the impact force. A wide range of initial impact velocities from 40 up to 180 m/s has been covered during the tests. The mass of the conical nose shaped projectile is 28 g, its diameter is 12 mm, and the thickness of the aluminum sheet is equal to 1.0 mm. The ABAQUS/Explicit finite element code has been used to simulate the perforation processes. The comparison of the ballistic curve was obtained numerically and was verified experimentally, and the failure patterns are presented using the optimal mesh densities which provide the stability of the results. A good agreement of the numerical and experimental results is observed

The Injector Layout of BERLinPro

BERLinPro is an Energy Recovery Linac Project running since 2011 at the HZB in Berlin. A conceptual design report has been published in 2012 [1]. One of the key components of the project is the 100 mA superconducting RF photocathode gun under development at the HZB since 2010. Starting in 2016 the injector will go into operation, providing 6.6 MeV electrons with an emittance well below 1mm mrad and bunches shorter than 5 ps. In 2017 the 50 MeV linac will be set up and full recirculation is planned for 2018. The injector design has been finalized and is described in detail in this paper. Emphasis is further laid on beam dynamics aspects and performance simulations of two different gun cavitie

Field Emission Studies of Heat Treated Mo Substrates

Molybdenum can be used as a substrate for the bi alkali antimonide photocathodes utilized for the generation of high brightness electron beams in a superconducting radio frequency SRF photoinjector cavities. Operation at high field strength is required to obtain a low emittance beam, thus increasing the probability of field emission FE from the cathode surface. Usually, substrates are heated in situ before alkali de position to remove oxide layers from the surface. FE on Mo substrates was measured by means of a field emission scanning microscope FESM . It turned out that in situ heat treatment HT of the Mo surface significantly changes the FE behaviour by activation of new emitters. For a better understanding of the mechanism for enhanced emission after in situ heating a witness Mo sample was investigated using x ray photoelectron spectroscop

Introducing GUNLAB a compact test facility for SRF photoinjectors

Superconducting radio frequency photoelectron injectors SRF photoinjectors are promising electron sources for high brightness accelerators with high average current and short pulse duration like FELs and ERLs. For the upcoming ERL project bERLinPro we want to test and commission different SRF photoinjectors, optimize the beam performance and examine photocathode materials in an independent test facility. Therefore we designed GunLab to characterize beam parameters from the SRF photoinjectors in a compact diagnostics beamline. The main challenge of GunLab is to characterize the full six dimensional phase space as a function of drive laser and RF parameters. Here we present design and estimated performance of GunLa

Research with real photons at the MAMI 1.6 GeV electron accelerator

The A2-CB Collaboration at Mainz is studying the structure of hadrons by meson photoproduction using unpolarised, linearly polarised and circularly polarised photons with energies up to 1.6 GeV. Photons are energy-tagged using the Glasgow-Mainz tagged photon spectrometer and a new high-energy end-point tagger which allows η’ reactions to be studied. Reaction products are detected in a ~4π detector consisting of the Crystal Ball detector and TAPS forward wall. Transverse or longitudinally polarised proton targets are available and new techniques have been developed to measure the polarisation of recoiling protons. These facilities have allowed an extensive programme of double-polarisation meson-photoproduction experiments to be carried out to search for so-called “missing baryon resonances” on proton and deuteron targets. Searches have also been carried out to investigate narrow resonances in the η-photoproduction channel at invariant masses around 1680 MeV. Coherent π0 production measurements have been used to estimate the neutron skin thickness in 208Pb. This paper presents selected highlights from the A2-CB collaboration research programme at MAMI

Towards the operation of Cs K Sb photocathodes in superconducting rf photoinjectors

High quantum efficiency photocathodes are mandatory for the operation of photoinjector driven electron accelerators with high average current and high brightness beams. Photocathodes based on bi alkali antimonides, e.g., CsK2Sb, exhibit high quantum efficiencies for visible light and can be operated close to the photoemission threshold, thus they are suitable candidates to provide high current and low emittance electron beams. In this paper, a codeposition procedure of K and Cs on Sb resulting in high quantum efficiency photocathodes is presented and compared to the sequential growth procedure that was established for photomultiplier and accelerator applications. In situ x ray photoelectron spectroscopy is applied to gain insights into the reaction pathway of antimony with alkali metals, and to optimize the growth process of CsK2Sb on Mo. It has been found that the average stoichiometry of the samples is similar after both procedures. The study also presents the behavior of the photocurrent at cryogenic temperatures, the influence of cooling and warmup cycles on the photocathode lifetime and our experience with storage and transport. This work demonstrates that our codeposition growth procedure reproducibly delivers high quantum efficiency photocathodes, and that their quantum efficiency, when excited with green photons, is not influenced by cryogenic temperature

Jet Substructure at the Tevatron and LHC: New results, new tools, new benchmarks

In this report we review recent theoretical progress and the latest experimental results in jet substructure from the Tevatron and the LHC. We review the status of and outlook for calculation and simulation tools for studying jet substructure. Following up on the report of the Boost 2010 workshop, we present a new set of benchmark comparisons of substructure techniques, focusing on the set of variables and grooming methods that are collectively known as "top taggers". To facilitate further exploration, we have attempted to collect, harmonise, and publish software implementations of these techniques.Comment: 53 pages, 17 figures. L. Asquith, S. Rappoccio, C. K. Vermilion, editors; v2: minor edits from journal revision