304 research outputs found
Ultrasonic assisted milling of reinforced plastics
The milling of glass and carbon fibre reinforced plastics provides manufacturers from the automotive and aerospace industry with major challenges. The high carbon and glass fibre content increases the risk of insufficient production qualities. The abrasive fibres cause cutting edge rounding which results in the issue that the comparatively thick glass fibre cannot be reliably cut, while the carbon fiber is being less of a challenge. One approach to improve the production quality is the use of ultrasonic assisted milling. At the IWF tests have been undertaken to study the influence of ultrasonic assistance on workpiece quality, cutting forces and dust generation
Photoemission of a doped Mott insulator: spectral weight transfer and qualitative Mott-Hubbard description
The spectral weight evolution of the low-dimensional Mott insulator TiOCl
upon alkali-metal dosing has been studied by photoelectron spectroscopy. We
observe a spectral weight transfer between the lower Hubbard band and an
additional peak upon electron-doping, in line with quantitative expectations in
the atomic limit for changing the number of singly and doubly occupied sites.
This observation is an unconditional hallmark of correlated bands and has not
been reported before. In contrast, the absence of a metallic quasiparticle peak
can be traced back to a simple one-particle effect.Comment: 4 pages, 4 figures, related theoretical work can be found in
arXiv:0905.1276; shortene
Two-Spinon and Orbital Excitations of the Spin-Peierls System TiOCl
We combine high-resolution resonant inelastic x-ray scattering with cluster
calculations utilizing a recently derived effective magnetic scattering
operator to analyze the polarization, excitation energy, and momentum dependent
excitation spectrum of the low-dimensional quantum magnet TiOCl in the range
expected for orbital and magnetic excitations (0 - 2.5 eV). Ti 3d orbital
excitations yield complete information on the temperature-dependent
crystal-field splitting. In the spin-Peierls phase we observe a dispersive
two-spinon excitation and estimate the inter- and intra-dimer magnetic exchange
coupling from a comparison to cluster calculations
Spin configurations in Co2FeAl0.4Si0.6 Heusler alloy thin film elements
We determine experimentally the spin structure of half-metallic
Co2FeAl0.4Si0.6 Heusler alloy elements using magnetic microscopy. Following
magnetic saturation, the dominant magnetic states consist of quasi-uniform
configurations, where a strong influence from the magnetocrystalline anisotropy
is visible. Heating experiments show the stability of the spin configuration of
domain walls in confined geometries up to 800 K. The switching temperature for
the transition from transverse to vortex walls in ring elements is found to
increase with ring width, an effect attributed to structural changes and
consequent changes in magnetic anisotropy, which start to occur in the narrower
elements at lower temperatures.Comment: 4 pages, 4 figure
Strain-dependent magnetic configurations in manganite-titanate heterostructures probed with soft X-ray techniques
We present a detailed study on the strain-induced magnetic domain structure of a (La,Sr)MnO3 thin film epitaxially grown on a BaTiO3 substrate through the use of polarization-dependent X-ray photoemission electron microscopy and X-ray absorption spectroscopy. Angular-dependent measurements allow us to detect vector magnetization on a single-domain scale, and we relate the strain-induced changes in magnetic anisotropy of the ferromagnetic film to the ferroelectric domain structure of the underlying substrate using X-ray magnetic circular and linear dichroism spectro-microscopy. Comparisons to measurements on a nearly strain free film of (La,Sr)MnO3 grown on a (La,Sr)(Al,Ta)O3 substrate illustrate that the BaTiO3 ferroelectric domain structure imprints specific domain sizes and wall orientations in the (La,Sr)MnO3/BaTiO3 artificial multiferroic heterostructure. Furthermore, a change of the BaTiO3 ferroelectric domain structure either with temperature or with applied electric field results in a corresponding change in the (La,Sr)MnO3 ferromagnetic domain structure, thus showing a possible route to obtain room-temperature electric field control of magnetic anisotropy at the nanoscal
X-ray absorption spectroscopy study of the electronic and magnetic proximity effects in and {\mathrm{La}}_{2-{}x}{\mathrm{Sr}}_{x}{\mathrm{CuO}}_{4}/{\mathrm{La}}_{2/3}{\mathrm{Ca}}_{1/3}{\mathrm{MnO}}_{3} multilayers
With x-ray absorption spectroscopy we investigated the orbital reconstruction and the induced ferromagnetic moment of the interfacial Cu atoms in YBa2Cu3O7/La2/3Ca1/3MnO3 (YBCO/LCMO) and La2âxSrxCuO4/La2/3Ca1/3MnO3 (LSCO/LCMO) multilayers. We demonstrate that these electronic and magnetic proximity effects are coupled and are common to these cuprate/manganite multilayers. Moreover, we show that they are closely linked to a specific interface termination with a direct Cu-O-Mn bond. We furthermore show that the intrinsic hole doping of the cuprate layers and the local strain due to the lattice mismatch between the cuprate and manganite layers are not of primary importance. These findings underline the central role of the covalent bonding at the cuprate/manganite interface in defining the spin-electronic properties
The effect of magnetic anisotropy on the spin configurations of patterned La0.7Sr0.3MnO3 elements
International audienceWe study the effect of magnetocrystalline anisotropy on the magnetic configurations of La0:7Sr0:3MnO3 bar and triangle elements using photoemission electron microscopy imaging. The dominant remanent state is a low energy flux-closure state for both thin (15 nm) and thick (50 nm) elements. The magnetocrystalline anisotropy, which competes with the dipolar energy, causes a strong modification of the spin configuration in the thin elements, depending on the shape, size and orientation of the structures. We investigate the magnetic switching processes and observe in triangular shaped elements a displacement of the vortex core along the easy axis for an external magnetic field applied close to the hard axis, which is well reproduced by micromagnetic simulations
Strain-dependent magnetic configurations in manganite-titanate heterostructures probed with soft X-ray techniques
We present a detailed study on the strain-induced magnetic domain structure of a (La,Sr)MnO3 thin film epitaxially grown on a BaTiO3 substrate through the use of polarization-dependent X-ray photoemission electron microscopy and X-ray absorption spectroscopy. Angular-dependent measurements allow us to detect vector magnetization on a single-domain scale, and we relate the strain-induced changes in magnetic anisotropy of the ferromagnetic film to the ferroelectric domain structure of the underlying substrate using X-ray magnetic circular and linear dichroism spectro-microscopy. Comparisons to measurements on a nearly strain free film of (La,Sr)MnO3 grown on a (La,Sr)(Al,Ta)O-3 substrate illustrate that the BaTiO3 ferroelectric domain structure imprints specific domain sizes and wall orientations in the (La,Sr)MnO3/BaTiO3 artificial multiferroic heterostructure. Furthermore, a change of the BaTiO3 ferroelectric domain structure either with temperature or with applied electric field results in a corresponding change in the (La,Sr)MnO3 ferromagnetic domain structure, thus showing a possible route to obtain room-temperature electric field control of magnetic anisotropy at the nanoscale
- âŠ