276 research outputs found

    Validation of tracheal intubation of wire-reinforced endotracheal tube with ultrasonography

    Get PDF
    Objective. Te use of ultrasonography (US) is a new method for verifying the location of the endotracheal tube. Design. Our study was designed as a paired-data and investigator-blind clinical study for evaluating the efectiveness of US for verifcation of wire-reinforced endotracheal tube (WR-ETT) placement compared with capnography. Setting. Tis study was conducted on 56 patients scheduled for elective surgery under general anesthesia. Patients. Fify patients completed the study as 6 were excluded for various reasons. Intervention. Two diferent investigators performed the ultrasonography and intubation independently from one another. While investigator 1 attempted to verify the location of the WR-ETT with a portable ultrasonography with sagittal trans-tracheal view, investigator 2 intubated the patient and verifed the location of the ETT using capnography. Measurements. Time for verifying the location of the ETT using both US and capnography was recorded. Main Results. When the ultrasonography method was compared with capnography for verifcation of the WR-ETT placement, the results showed 95.75% sensitivity and 100% specifcity. Te average verifcation times for endotracheal intubation were 12.78 ± 7.46 s. and 24.44 ± 1.45 s. with US and capnography, respectively (p=0.003). Conclusion. Our results suggest that ultrasound identifcation of a WR-ETT within the trachea is a rapid and accurate method for confrmation of tracheal placement. Larger studies are needed before widespread use of this technique

    Inhibition of TLR4/TRIF/IRF3 Signaling Pathway by Curcumin in Breast Cancer Cells

    Get PDF
    Purpose: Toll-like receptor 4 (TLR4) is over-expressed in breast tumors and thus contributing to the tumor progression and metastasis. Natural products have drawn attention in cancer immunotherapy due to their various biological activities. Curcumin is well investigated in different types of cancer. However, the mechanisms underlying its anti-inflammatory actions have not been extensively elucidated. For this purpose, we explored the inhibitory effects of curcumin on lipopolysaccharide (LPS)-induced TLR4 dependent TRIF signaling pathway in two subtypes of breast cancer cell lines (MCF-7 and MDA-MB-231) in this study. Methods: In this context, the cytotoxicity of curcumin and LPS alone and the combination of curcumin with LPS on these cells was evaluated by WST-1 assay. The expression level of TLR4 and the release of type I interferon (IFN) levels were determined after treatment with curcumin and/or LPS by RT-PCR and ELISA analysis, respectively. Furthermore, the subcellular localization of TLR4 and interferon regulatory factor 3 (IRF3) were detected by immunofluorescence analysis. Results: Curcumin treatment suppressed breast cancer cells viabilities and the activation of TLR4-mediated TRIF signaling pathway by the downregulation of TLR4 and IRF3 expression levels and the inhibition of type I IFN (IFN-alpha/beta) levels induced by LPS. However, curcumin was more efficient in MDA-MB-231 cells than MCF-7 cells owing to its greater inhibitory efficacy in the LPS-enhanced TLR4 signaling pathway. Furthermore, IFN-alpha/beta levels induced by TLR4 and IRF3 were decreased in these cells following curcumin treatment. Conclusions: Consequently, these results demonstrated that the activation of LPS stimulated TLR4/TRIF/IRF3 signaling pathway was mediated by curcumin in breast cancer cells, in vitro. However, more studies are necessary to examine the curcumin's anti-inflammatory activities on TLR4/MyD88/NF-kappa B as well as other signaling pathways downstream of TLRs in breast cancer

    Microzonation study based on ground amplification for erzincan city

    Get PDF
    Erzincan İli 1. derece deprem bölgesi içinde yeralmaktadır. Zemin yüzeyinden ana kayaya kadar alüvyon kalınlığı 1 km’yi bulan yerleşim alanında zemin büyütmesinin ayrıntılı olarak incelenmesinin gerekliliği açıktır. Bu çalışmada, Erzincan İl merkezi için bir boyutlu kayma dalgası teorisine dayanan, eşdeğer-doğrusal zemin büyütme analizleri yapılmıştır. Çalışmada, zemin profillerini belirlemek amacıyla, 1960-1980 yılları arasında Devlet Su İşleri Genel Müdürlüğünce (DSİ) açılmış ve derinlikleri 275 m’yi bulan sondaj kuyularına ait veriler kullanılmıştır. Eşdeğer-doğrusal büyütme analizleri EduShake/ProShake programı kullanılarak gerçekleştirilmiştir. Kuyu noktalarında oluşturulan profillerde, 8 farklı anakaya hareketi kullanılarak, zemin yüzeyinde oluşan ortalama hareketin ivme-zaman geçmişi ve ortalama PSA (görünür spektral ivme) grafikleri oluşturularak Türk Deprem Yönetmeliğinde (2007) verilen tasarım spektrumu ve ana kaya mostrası PSA ile karşılaştırılmıştır. Belirli periyotlar için, spektral ivme cinsinden büyütme oranları (ana kaya mostrası hareketine göre) hesaplanmıştır. Sondaj noktalarının temsil ettiği alanlarda, büyütmeye maruz kalması beklenen yapı periyotları haritada gösterilmektedir.Nearly all regions in Erzincan lie on a first degree earthquake zone. In the plains of the city, the thickness of the alluvial layer over the bedrock is about 1 km. In this regard, it is clear that a detailed ground amplification analysis is required for the city settlement area. In this research, soil amplification analyses based on equivalent linear one dimensional shear wave theory have been made for the province of Erzincan. For this purpose, borehole (max depth 275 m) data pertaining to DSI (State Water Works) drilled between 1960 and 1980 for ground water exploration are used. The equivalent linear ground motion analyses have been accomplished by EduShake/ProShake, a one dimensional shear wave analysis program. Eight different scaled real ground motion acceleration time histories are used to obtain surface motion PSA (Pseudo Spectral Acceleration). The average of PSA at each boring location is plotted together with bed rock outcrop PSA and 2007-Turkish Earthquake Code Design Spectrum. The amplification ratios for each period are computed by dividing surface PSA to bedrock outcrop PSA. The map of the city is divided into microzones, representing each boring log to display periods where computed amplifications are observed

    Metaproteogenomic analysis of saliva samples from Parkinson's disease patients with cognitive impairment

    Get PDF
    Cognitive impairment (CI) is very common in patients with Parkinson's Disease (PD) and progressively develops on a spectrum from mild cognitive impairment (PD-MCI) to full dementia (PDD). Identification of PD patients at risk of developing cognitive decline, therefore, is unmet need in the clinic to manage the disease. Previous studies reported that oral microbiota of PD patients was altered even at early stages and poor oral hygiene is associated with dementia. However, data from single modalities are often unable to explain complex chronic diseases in the brain and cannot reliably predict the risk of disease progression. Here, we performed integrative metaproteogenomic characterization of salivary microbiota and tested the hypothesis that biological molecules of saliva and saliva microbiota dynamically shift in association with the progression of cognitive decline and harbor discriminatory key signatures across the spectrum of CI in PD. We recruited a cohort of 115 participants in a multi-center study and employed multi-omics factor analysis (MOFA) to integrate amplicon sequencing and metaproteomic analysis to identify signature taxa and proteins in saliva. Our baseline analyses revealed contrasting interplay between the genus Neisseria and Lactobacillus and Ligilactobacillus genera across the spectrum of CI. The group specific signature profiles enabled us to identify bacterial genera and protein groups associated with CI stages in PD. Our study describes compositional dynamics of saliva across the spectrum of CI in PD and paves the way for developing non-invasive biomarker strategies to predict the risk of CI progression in PD.FEMS Research and Training Gran

    İleri Evre Gastrointestinal Kanserli Hastalarda Fibrin ile İlişkili Yeni Bir Biyobelirteç Olan Serum DR-70 Düzeyinin Prognostik ve Prediktif Değeri

    Get PDF
    Amaç: DR-70, kandaki fibrin yıkım ürünlerini tespit eden yeni geliştirilmiş bir testtir. Bu çalışmada ileri evre gastrointestinal (GI) kanserlerde DR- 70’in tedavi yanıtını izlemedeki etkinliğini değerlendirmeyi amaçladık. Gereç ve Yöntem: Çalışmaya farklı serilerdeki sistemik tedaviler ile tedavi edilen ileri evre GI kanserli hastalar dahil edildi. Görüntüleme çalışmaları, DR-70 ve geleneksel tümör belirteçleri [karsinoembriyonik antijen (CEA), karbonhidrat antijeni (CA) 19-9] başlangıçta ve tedavinin üçüncü ayında tekrarlandı. Bulgular: Çalışmaya kolorektal (%52,1), özofagogastrik (%32,4) ve pankreatikobiliyer kanser (%15,5) tanısı konan toplam 142 hasta alındı. Hastaların çoğu birinci basamak tedavi alıyordu (%56,3). Hastaların %57’sinde ikinci kan örneği alındı. Özofagogastrik kanseri olan hastalarda, DR-70 yanıtı tedavi yanıtı ile iyi korelasyon gösterdi (p=0,007) ve başlangıçta düşük serum DR-70 düzeyi, daha uzun genel sağkalım ile anlamlı şekilde ilişkiliydi (p=0,02). Kolorektal kanserli hastalarda tedavi öncesi DR-70 ile CEA düzeyleri arasında pozitif fakat zayıf bir korelasyon (p=0,03, r=0,244) varken, tedavi öncesi DR-70 ile CA 19-9 arasında özofagogastrik ve pankreatikobilier kanserlerde orta düzeyde pozitif bir korelasyon vardı (sırasıyla p=0,01, r=0,402 ve p=0,04, r=0,515). DR-70 konsantrasyonunda %25’ten fazla azalma, daha iyi genel ve progresyonsuz sağkalım ile ilişkiliydi. Sonuç: DR-70, özellikle özofagogastrik kanserde tedaviye yanıtı ve sağkalımı ön gören güçlü bir belirteçtir

    Investigation of Alevi-Bektashi classics according to faith and worship subjects in primary school religious culture and moral education curriculum

    No full text
    Yüksek Lisans TeziBu çalışmanın amacı, İlköğretim Din Kültürü ve Ahlak Bilgisi (İDKAB) Ders müfredatına göre inanç ve ibadet konularının Alevilerce kabul gören temel kaynaklarda (Alevi Bektaşi Klasiklerinde)ne derece yer aldığını ortaya koyarak Alevi kültürü ile yetişen öğrencileri kendi geçmiş değerleriyle buluşturmaktır. Araştırmamızın birinci bölümünde, Kavramsal Çerçevede Alevilik ve Alevilikle ilgili temel kavramlar açıklandıktan sonra İDKAB Öğretim Programı inanç ve ibadet konuları tanıtılmış, Kuramsal Çerçevede ise İDKAB Öğretim Programı ve bu ünitelerin kazanımları hakkında bilgi verilmiştir. İkinci bölümde, Alevi Bektaşi Klasiklerinde İDKAB dersi inanç ve ibadet konularının ne derece yer verildiği literatür tarama yöntemi ve nitel araştırma tekniğiyle ortaya çıkarılmaya çalışılmıştır. Araştırma sonucunda İDKAB öğretim programının inanç ve ibadet konularının Alevilerce kabul gören bu klasiklerde yer aldığına rastlanılmıştır. Bu durum da bizlere İDKAB öğretim programı inanç ve ibadet konularının Alevi kültürü ile yetişmiş öğrencilerin dini yaşantılarıyla uyumlu olduğunu göstermiştir.The aim of this study is to bring together the students, who are grown Alevist culture, with their past values by revealing to what extent of the belief and the worship issues, that are included in Religious Culture and Moral Knowledge in Primary Education (RCMKPE) lesson, exist in basic resources ( Alevist –Bektashi Classics) which are agreed by Alevists. In the first part of the research, after basic concepts related to Alawism are explained as a cognitive framework, the belief and the worship issues of RCMKPE Programme are introduced and, then as a hypothetic framework, information about the acqusition RCMKPE Programme is supplied. In the second part, what extent of the belief and the worship issues of RCMKPE lesson in Alevist-Bektashi Classics, is objected with the method of literature scanning and the technique of qualitative search. As the result of the research, it has been seen that the belief and the worship of RCMKPE programme are included in these classics that are agreed by Alevists. This case has shown us that, the belief and the worship issues of RCMKPE programme are coherent with the religious lives of students, who are grown in Alevist culture

    PRODUCTION OF SiC PARTICLE REINFORCED ALUMINIUM MATRIX BASED COMPOSITES BY MECHANICAL ALLOY METHOD AND INVESTIGATION OF THEIR WEAR BEHAVIOR

    No full text
    Bu çalısmada, mekanik alasımlama metodu ile farklı boyut ve oranlarda SiC partikülleri ile takviyelendirilmis Al esaslı Metal matrisli kompozitler (MMK) üretilmis ve kuru asınma özellikleri arastırılmıstır. Toz karısımları, 450 dev/dak hızda bilyeli dikey degirmende 1,5 ve 3,5 saat karıstırılarak hazırlanmıstır ve daha sonra 650 MPa'da bir kalıpta preslenerek dairesel numuneler üretilmistir. Elde edilen blok numuneler 600 ºC'de 2 saat Ar atmosferi altında sinterlenerek MMK numuneler elde edilmistir. Sinterleme sonrası üretilen MMK'lerin yogunluk, porozite, sertlik ölçümleri ve mikroyapı incelemeleri yapılmıstır. Buna ilaveten, asınma deneyleri pin-on-disk cihazında sabit hızla farklı yükler altında gerçeklestirilmistir. Asınmıs yüzeylerin Taramalı elektron mikroskobu (SEM) ve Elementsel noktasal analizleri (EDAX) yapılmıstır. Yogunluk ölçümleri, porozitenin çok düsük oldugunu, partikül oranının artması ve boyutunun düsmesi ile porozite oranının arttıgını göstermistir. MMK'lerin sertligi ise, genelde takviye oranının artması ile orantılı olarak arttıgı gözlenmistir. Optik mikroskop ile mikroyapı incelemeleri partikül boyutunun artması ile homojen bir dagılım saglandıgını göstermis, düsük boyutlu partiküllerin partikül topaklanmasına ve porozite olusumuna neden olduklarını ortaya çıkarmıstır. Buna ilaveten, yapılan asınma deneylerinde MMK'de seramigin tane boyutu küçüldükçe agırlık kaybının arttıgı görülmüstür. Fakat takviye oranının artması ile sertlik degerleri artmıs agırlık kaybı ise azalmıstır. Ayrıca yapılan tüm deneylerde yük arttıkça agırlık kaybı artmıstır. Asınma deneyleri sonrasında MMK'in SEM incelemelerinde; agır yüklerde oksitlenme ve plastik deformasyon hakim iken düsük yüklerde ise oksidasyon ve kraterlesmenin baskın oldugu görülmüstür. Savunma Oyunlari Strateji Oyunlari Bakici Oyunlari Webcam Oyunlari Oyun Oyna In this work, Al alloy (Al-2014) based Metal Matrix Composites (MMC's) reinforced with varying size and weight fraction of SiC particles have been produced by using a mechanical alloy method and their dry wear behaviour have been investigated. Powder mixtures, consisting of Al and the various amounts of SiC particles were prepared by mixing in a vertical ball mill for 1,5 and 3,5 hours at a rotational speed of 450 rpm. Then the cylindrical sipecimens were obtained by pressing these powder mixtures in a die at 650 MPa pressure. The produced samples were sintered at 600 ºC for 2 hours in a pipe type of sintering furnace under a control of argon gas. Optical microscopic examination, hardness, density and porosity measurements were carried out. In addition, wear tests were performed in a pin-on-disc type of wear machine under different loads at a fixed speed. Furthermore, scanning electron microscope (SEM) and energy dispersive X-ray (EDAX) analysis were used to characterize the worn surfaces of composites. The density measurement showed that the samples contained a little porosity, and the amount of porosity in the composites increased with increasing volume fraction and decreasing size of particles. Optical microscopic observation of the microstructures revealed that the dispersion of the coarser sizes of particles was more uniform while finer particles led to agglomeration of the particles and porosity. In addition, the experimental results indicated that weight loss increased with decreasing particle size. However, the weight loss also decreased significantly with increasing SiC content in the composite due to its hardness. Moreover, the wear rates of all samples increased with increasing loads at all wear tests. Furthermore, SEM examination showed that the wear mehanism was oxidation and plastic deformation under higher load conditions, but oxidation and crater were dominant under lower testing conditions
    corecore