Estimation of muscular forces from SSA smoothed sEMG signals calibrated by inverse dynamics-based physiological static optimization

The estimation of muscular forces is useful in several areas such as biomedical or rehabilitation engineering. As muscular forces cannot be measured in vivo non-invasively they must be estimated by using indirect measurements such as surface electromyography (sEMG) signals or by means of inverse dynamic (ID) analyses. This paper proposes an approach to estimate muscular forces based on both of them. The main idea is to tune a gain matrix so as to compute muscular forces from sEMG signals. To do so, a curve fitting process based on least-squares is carried out. The input is the sEMG signal filtered using singular spectrum analysis technique. The output corresponds to the muscular force estimated by the ID analysis of the recorded task, a dumbbell weightlifting. Once the model parameters are tuned, it is possible to obtain an estimation of muscular forces based on sEMG signal. This procedure might be used to predict muscular forces in vivo outside the space limitations of the gait analysis laboratory.Postprint (published version

Note: "Lock-in accelerometry" to follow sink dynamics in shaken granular matter

Understanding the penetration dynamics of intruders in granular beds is relevant not only for fundamental Physics, but also for geophysical processes and construction on sediments or granular soils in areas potentially affected by earthquakes. While the penetration of intruders in two dimensional (2D) laboratory granular beds can be followed using video recording, it is useless in three dimensional (3D) beds of non-transparent materials such as common sand. Here we propose a method to quantify the sink dynamics of an intruder into laterally shaken granular beds based on the temporal correlations between the signals from a reference accelerometer fixed to the shaken granular bed, and a probe accelerometer deployed inside the intruder. Due to its analogy with the working principle of a lock in amplifier, we call this technique Lock in accelerometry (LIA). During Earthquakes, some soils can lose their ability to sustain shear and deform, causing subsidence and sometimes substantial building damage due to deformation or tumblin

Fenómenos de retracción y comportamiento frente a la corrosión de materiales base cemento de bajo pH basados en OPC o CAC

Prior to using low-pH cementitious materials in underground repositories for high level waste, the characteristics determining their long-term durability must be analysed in depth. In this sense, different shrinkage tests have been made on mortar and concrete specimens using low-pH cement formulations based on ordinary portland cement (OPC) or calcium aluminate cement (CAC), with high mineral admixtures contents. They showed similar autogenous shrinkage than samples without mineral admixtures but higher drying shrinkage when materials based on OPC with high silica fume contents were considered. Besides, as the use of reinforced concrete could be required in underground repositories, the susceptibility of reinforcement to corrosion when using low-pH cementitious materials based on OPC was analyzed, considering carbon steel and galvanized steel. In the formers corrosion was detected due to the low pore solution pH but any problem was detected when galvanized reinforcement were used.Previo al empleo de materiales con cementos de bajo pH en almacenamientos geológicos profundos (AGP) de residuos radiactivos de alta actividad, características relacionadas con su durabilidad a largo plazo deben ser verificadas. Así, su estabilidad volumétrica se ha analizado en morteros y hormigones de bajo pH basados en OPC o CAC, con elevados contenidos de adiciones minerales. Estos presentaron retracciones autógenas similares a las medidas en materiales convencionales, pero retracciones por secado mayores en los basados en OPC y altos contenidos de humo de sílice. Dado que en zonas de los AGP podría emplearse hormigón armado, también se evaluó la susceptibilidad a la corrosión de aceros al carbono y aceros galvanizados en materiales de bajo pH basados en OPC. Se detectó un inicio temprano de corrosión en los primeros debido al bajo pH presente en el fluido de los poros de estos materiales, sin detectarse problemas al emplear aceros galvanizados

Effect of zinc intake on growth in infants: A meta-analysis

A systematic review and meta-analysis of available randomized controlled trials (RCTs) was conducted to evaluate the effect of zinc (Zn) intake on growth in infants. Out of 5500 studies identified through electronic searches and reference lists, 19 RCTs were selected after applying the exclusion/inclusion criteria. The influence of Zn intake on growth was considered in the overall meta-analysis. Other variables were also taken into account as possible effect modifiers: doses of Zn intake, intervention duration, nutritional status, and risk of bias. From each select growth study, final measures of weight, length, mid upper arm circumference (MUAC), head circumference, weight for age z-score (WAZ), length for age z-score (LAZ), and weight for length z-score (WLZ) were assessed. Pooled β and 95% confidence interval (CI) were calculated. Additionally, we carried out a sensitivity analysis. Zn intake was not associated with weight, length, MUAC, head circumference, and LAZ in the pooled analyses. However, Zn intake had a positive and statistically effect on WAZ (β = 0.06; 95%CI 0.02 to 0.10) and WLZ (β = 0.05; 95%CI 0.01 to 0.08). The dose–response relationship between Zn intake and these parameters indicated that a doubling of Zn intake increased WAZ and WLZ by approximately 4%. Substantial heterogeneity was present only in length analyses (I2 = 45%; p = 0.03). Zn intake was positively associated with length values at short time (four to 20 weeks) (β = 0.01; CI 95% 0 to 0.02) and at medium doses of Zn (4.1 to 8 mg/day) (β = 0.003; CI 95% 0 to 0.01). Nevertheless, the effect magnitude was small. Our results indicate that Zn intake increases growth parameters of infants. Nonetheless, interpretation of these results should be carefully considered

Identification of an hepatitis delta virus-like ribozyme at the mRNA 5′-end of the L1Tc retrotransposon from Trypanosoma cruzi

L1Tc is a non-LTR LINE element from Trypanosoma cruzi that encodes its transposition machinery and bears an internal promoter. Herewith, we report the identification of an in vitro active hepatitis delta virus-like ribozyme located in the first 77 nt at the 5′-end of the L1Tc mRNA (L1TcRz). The data presented show that L1TcRz has a co-transcriptional function. Using gel-purified uncleaved RNA transcripts, the data presented indicate that the kinetics of the self-cleaving, in a magnesium-dependent reaction, fits to a two-phase decay curve. The cleavage point identified by primer extension takes place at +1 position of the element. The hydroxyl nature of the 5′-end of the 3′-fragment generated by the cleavage activity of L1TcRz was confirmed. Since we have previously described that the 77-nt long fragment located at the 5′-end of L1Tc has promoter activity, the existence of a ribozyme in L1Tc makes this element to be the first described non-LTR retroelement that has an internal promoter–ribozyme dual function. The L1Tc nucleotides located downstream of the ribozyme catalytic motif appear to inhibit its activity. This inhibition may be influenced by the existence of a specific L1Tc RNA conformation that is recognized by RNase P

Phase diagram and influence of defects in the double perovskites

The phase diagram of the double perovskites of the type Sr_{2-x} La_x Fe Mo O_6 is analyzed, with and without disorder due to antisites. In addition to an homogeneous half metallic ferrimagnetic phase in the absence of doping and disorder, we find antiferromagnetic phases at large dopings, and other ferrimagnetic phases with lower saturation magnetization, in the presence of disorder.Comment: 4 pages, 3 postscript figures, some errata correcte

Use of water troughs by wild rabbits (Oryctolagus cuniculus) in a farmland area of north–west Spain

Uso de bebederos por parte del conejo de monte (Oryctolagus cuniculus) en un paisaje agrícola en el noroeste de EspañaEn la península Ibérica, los bebederos son una herramienta de gestión de hábitat muy frecuente para incrementar las densidades de especies de caza menor, aunque el comportamiento de ingestión de agua de las especies “diana” no se ha estudiado en profundidad, como es el caso del conejo de monte (Oryctolagus cuniculus). Estudiamos el uso de bebederos por parte de conejos de monte durante 228 períodos de una semana en tres períodos consecutivos (junio–octubre) de 2008, 2009 y 2010 en un paisaje agrícola de noroeste de España, utilizando cámaras de fototrampeo. Los conejos utilizaron el 43% de los bebederos y se observó un número significativamente mayor de conejos bebiendo en bebederos rodeados por cobertura vegetal en comparación con bebederos situados en campos abiertos sin dicha cobertura vegetal. La mayoría de los conejos que bebieron fueron fotografiados de julio a septiembre (98%), si bien la utilización de bebederos no se relacionó claramente con la climatología. Los conejos bebieron principalmente durante la mañana (52% de los conejos) no tanto durante la tarde y noche, y raramente durante el mediodía. Los conejos se fotografiaron junto con perdices rojas (Alectoris rufa) en el 6% de las fotografías. Estos hallazgos sugieren que los bebederos son útiles para el conejo y otras especies con necesidades hídricas similares y que debieran ser colocados cerca de zonas con cobertura vegetal arbustiva.Installation of water troughs is a common approach to increase densities of small game species in the Iberian peninsula but little is known about the watering patterns of target species, such as the wild rabbit (Oryctolagus cuniculus). Using camera trapping, we monitored the use of water troughs by wild rabbits over 228 weeks in three consecutive periods, from June to October in 2008, 2009 and 2010, on farmland in north–west Spain. Wild rabbits used 43% of the water troughs. A significantly higher number of rabbits were observed drinking at troughs surrounded by shrub cover than at those in open fields. Most drinking events were recorded from July to September (98%), though the use of water troughs was not clearly related to weather. Wild rabbits drank mainly during the morning (52% of rabbits), less so in the evening and at night, and rarely in the afternoon. Wild rabbits were photographed together with red–legged partridges (Alectoris rufa) in 6% of photographs. These findings suggest water troughs are useful for species such as wild rabbits and should be allocated close to shrub areas.Uso de bebederos por parte del conejo de monte (Oryctolagus cuniculus) en un paisaje agrícola en el noroeste de EspañaEn la península Ibérica, los bebederos son una herramienta de gestión de hábitat muy frecuente para incrementar las densidades de especies de caza menor, aunque el comportamiento de ingestión de agua de las especies “diana” no se ha estudiado en profundidad, como es el caso del conejo de monte (Oryctolagus cuniculus). Estudiamos el uso de bebederos por parte de conejos de monte durante 228 períodos de una semana en tres períodos consecutivos (junio–octubre) de 2008, 2009 y 2010 en un paisaje agrícola de noroeste de España, utilizando cámaras de fototrampeo. Los conejos utilizaron el 43% de los bebederos y se observó un número significativamente mayor de conejos bebiendo en bebederos rodeados por cobertura vegetal en comparación con bebederos situados en campos abiertos sin dicha cobertura vegetal. La mayoría de los conejos que bebieron fueron fotografiados de julio a septiembre (98%), si bien la utilización de bebederos no se relacionó claramente con la climatología. Los conejos bebieron principalmente durante la mañana (52% de los conejos) no tanto durante la tarde y noche, y raramente durante el mediodía. Los conejos se fotografiaron junto con perdices rojas (Alectoris rufa) en el 6% de las fotografías. Estos hallazgos sugieren que los bebederos son útiles para el conejo y otras especies con necesidades hídricas similares y que debieran ser colocados cerca de zonas con cobertura vegetal arbustiva

Pr77 and L1TcRz: A dual system within the 5′-end of L1Tc retrotransposon, internal promoter and HDV-like ribozyme

The sequence corresponding to the first 77 nucleotides of the L1Tc and NARTc non-LTR retrotransposons from Trypanosoma cruzi is an internal promoter (Pr77) that generates abundant, although poorly translatable, un-spliced transcripts. It has been recently described that L1TcRz, an HDV-like ribozyme, resides within the 5′-end of the RNA from the L1Tc and NARTc retrotransposons. Remarkably, the same first 77 nucleotides of L1Tc/NARTc elements comprise both the Pr77 internal promoter and the HDV-like L1TcRz. The L1TcRz cleaves on the 5′-side of the +1 nucleotide of the L1Tc element insuring that the promoter and the ribozyme functions travel with the transposon during retrotransposition. The ribozyme activity would prevent the mobilization of upstream sequences and insure the individuality of the L1Tc/NARTc copies transcribed from associated tandems. The Pr77/L1TcRz sequence is also found in other trypanosomatid’s non-LTR retrotransposons and degenerated retroposons. The possible conservation of the ribozyme activity in a widely degenerated retrotransposon, as the Leishmania SIDERs, could indicate that the presence of this element and the catalytic activity could play some favorable genetic regulation. The functional implications of the Pr77/L1TcRz dual system in the regulation of the L1Tc/NARTc retrotransposons and in the gene expression of trypanosomatids are also discussed in this paper