Feedback on Trunk Movements From an Electronic Game to Improve Postural Balance in People With Nonspecific Low Back Pain: Pilot Randomized Controlled Trial

Background: Postural balance is compromised in people with low back pain, possibly by changes in motor control of the trunk. Augmenting exercising interventions with sensor-based feedback on trunk posture and movements might improve postural balance in people with low back pain. Objective: We hypothesized that exercising with feedback on trunk movements reduces sway in anterior-posterior direction during quiet standing in people with low back pain. Secondary outcomes were lumbar spine and hip movement assessed during box lift and waiter bow tasks, as well as participant-reported outcomes. Adherence to the exercising intervention was also examined. Methods: A randomized controlled trial was conducted with the intervention group receiving unsupervised home exercises with visual feedback using the Valedo Home, an exergame based on 2 inertial measurement units. The control group received no intervention. Outcomes were recorded by blinded staff during 4 visits (T1-T4) at University Hospital Zurich. The intervention group performed 9 sessions of 20 minutes in the 3 weeks between T2 and T3 and were instructed to exercise at their own convenience between T3 and T4. Postural balance was assessed on a force platform. Lumbar spine and hip angles were obtained from 3 inertial measurement units. The assessments included pain intensity, disability, quality of life, and fear of movement questionnaires. Results: A total of 32 participants with nonspecific low back pain completed the first assessment T1, and 27 (84%) participants were randomized at T2 (n=14, 52% control and n=13, 48% intervention). Intention-to-treat analysis revealed no significant difference in change in anterior-posterior sway direction during the intervention period with a specified schedule (T2-T3) between the groups (W=99; P=.36; r=0.07). None of the outcomes showed significant change in accordance with our hypotheses. The intervention group completed a median of 61% (55/90; range 2%-99%) of the exercises in the predefined training program. Adherence was higher in the first intervention period with a specified schedule. Conclusions: The intervention had no significant effect on postural balance or other outcomes, but the wide range of adherence and a limited sample size challenged the robustness of these conclusions. Future work should increase focus on improving adherence to digital interventions. Trial registration: ClinicalTrials.gov NCT04364243; https://clinicaltrials.gov/ct2/show/NCT04364243. International registered report identifier (irrid): RR2-10.2196/26982. Keywords: exergame; inertial measurement unit; kinesiophobia; low back pain; motor control; postural balance; postural feedback; randomized controlled trial

CO_2 Reduction Selective for C_(≥2) Products on Polycrystalline Copper with N-Substituted Pyridinium Additives

Electrocatalytic CO_2 reduction to generate multicarbon products is of interest for applications in artificial photosynthetic schemes. This is a particularly attractive goal for CO_2 reduction by copper electrodes, where a broad range of hydrocarbon products can be generated but where selectivity for C–C coupled products relative to CH_4 and H_2 remains an impediment. Herein we report a simple yet highly selective catalytic system for CO_2 reduction to C_(≥2) hydrocarbons on a polycrystalline Cu electrode in bicarbonate aqueous solution that uses N-substituted pyridinium additives. Selectivities of 70–80% for C_2 and C_3 products with a hydrocarbon ratio of C_(≥2)/CH4significantly greater than 100 have been observed with several additives. ^(13)C-labeling studies verify CO_2 to be the sole carbon source in the C_(≥2) hydrocarbons produced. Upon electroreduction, the N-substituted pyridinium additives lead to film deposition on the Cu electrode, identified in one case as the reductive coupling product of N-arylpyridinium. Product selectivity can also be tuned from C_(≥2) species to H_2 (∼90%) while suppressing methane with certain N-heterocyclic additives

Results of an interlaboratory method performance study for the size determination and quantification of silver nanoparticles in chicken meat by single-particle inductively coupled plasma mass spectrometry (sp-ICP-MS)

Single-particle inductively coupled plasma mass spectrometry (sp-ICP-MS) promises fast and selective determination of nanoparticle size and number concentrations. While several studies on practical applications have been published, data on formal, especially interlaboratory validation of sp-ICP-MS, is sparse. An international interlaboratory study was organized to determine repeatability and reproducibility of the determination of the median particle size and particle number concentration of Ag nanoparticles (AgNPs) in chicken meat. Ten laboratories from the European Union, the USA, and Canada determined particle size and particle number concentration of two chicken meat homogenates spiked with polyvinylpyrrolidone (PVP)-stabilized AgNPs. For the determination of the median particle diameter, repeatability standard deviations of 2 and 5% were determined, and reproducibility standard deviations were 15 and 25%, respectively. The equivalent median diameter itself was approximately 60% larger than the diameter of the particles in the spiking solution. Determination of the particle number concentration was significantly less precise, with repeatability standard deviations of 7 and 18% and reproducibility standard deviations of 70 and 90%

Impact of in vitro digestion on gastrointestinal fate and uptake of silver nanoparticles with different surface modifications

Nanomaterials, especially silver nanoparticles (AgNPs), are used in a broad range of products owing to their antimicrobial potential. Oral ingestion is considered as a main exposure route to AgNPs. This study aimed to investigate the impact of the biochemical conditions within the human digestive tract on the intestinal fate of AgNPs across an intestinal in vitro model of differentiated Caco-2/HT29-MTX cells. The co-culture model was exposed to different concentrations (250–2500 µg/L) of pristine and in vitro digested (IVD) AgNPs and silver nitrate for 24 h. ICP-MS and spICP-MS measurements were performed for quantification of total Ag and AgNPs. The AgNPs size distribution, dissolution, and particle concentration (mass- and number-based) were characterized in the cell fraction and in the apical and basolateral compartments of the monolayer cultures. A significant fraction of the AgNPs dissolved (86–92% and 48–70%) during the digestion. Cellular exposure to increasing concentrations of pristine or IVD AgNPs resulted in a concentration dependent increase of total Ag and AgNPs content in the cellular fractions. The cellular concentrations were significantly lower following exposure to IVD AgNPs compared to the pristine AgNPs. Transport of silver as either total Ag or AgNPs was limited (<0.1%) following exposure to pristine and IVD AgNPs. We conclude that the surface chemistry of AgNPs and their digestion influence their dissolution properties, uptake/association with the Caco-2/HT29-MTX monolayer. This highlights the need to take in vitro digestion into account when studying nanoparticle toxicokinetics and toxicodynamics in cellular in vitro model systems.</p

Gastight Hydrodynamic Electrochemistry: Design for a Hermetically Sealed Rotating Disk Electrode Cell

Rotating disk electrodes (RDEs) are widely used in electrochemical characterization to analyze the mechanisms of various electrocatalytic reactions. RDE experiments often make use of or require collection and quantification of gaseous products. The combination of rotating parts and gaseous analytes makes the design of RDE cells that allow for headspace analysis challenging due to gas leaks at the interface of the cell body and the rotator. In this manuscript we describe a new, hermetically-sealed electrochemical cell that allows for electrode rotation while simultaneously providing a gastight environment. Electrode rotation in this new cell design is controlled by magnetically coupling the working electrode to a rotating magnetic driver. Calibration of the RDE using a tachometer shows that the rotation speed of the electrode is the same as that of the magnetic driver. To validate the performance of this cell for hydrodynamic measurements, limiting currents from the reduction of a potassium ferrocyanide (K_4[Fe(CN)_6] •3H_2O) were measured and shown to compare favorably with calculated values from the Levich equation and with data obtained using more typical, non-gastight RDE cells. Faradaic efficiencies of ~95% were measured in the gas phase for oxygen evolution in alkaline media at an Inconel 625 alloy electrocatalyst during rotation at 1600 rpm. These data verify that a gastight environment is maintained even during rotation

Review of analytical approaches for the identification of non-intentionally added substances in paper and board food contact materials

Background: Food contact materials (FCM) may contain non-intentionally added substances (NIAS) as a result of reaction by-products, oligomers, degradation processes, chemical reactions between packaging materials and foodstuff, or as impurities from the raw materials used for their production. Scope and approach: In this review, current approaches for the detection and identification of NIAS from paper and board FCM are presented. Reviewed are the definition of NIAS, approaches for NIAS identification and quantification, the comprehensive analysis of NIAS and the role of in silico tools and bioassays. Key Findings and Conclusions: NIAS in paper and board are mostly components from printing inks, adhesives, sizing agents and surface coatings. Recycled paper contains overall more NIAS than fresh paper. Targeted analysis is generally performed for predicted NIAS, whereas an untargeted, or full-scan screening method is applied to detect and identify unpredicted NIAS. Sample preparation and contact conditions fall in two categories; migration and extraction. Migration studies are performed with food simulants while extraction studies are Soxhlet or ultrasound assisted solvent extraction. In untargeted analysis in silico tools are gaining importance in the identification of NIAS. Bioassays are used to determine the bioactivity of extracts or fractions in order to assess the potential toxicity of NIAS present in the mixture. A combination of bioassays and chemical analysis is used to direct the identification of unknown bioactive NIAS in complex mixtures like those from paper and board FCM. However, future research is required into the selection of bioassays since these should not only be sensitive enough for detecting all compounds of concern but should also have a relevance with human health.</p

Structure and the Physico-Mechanical Properties of the Ceramic Coatings Obtained by the Cumulative -Detonation Device

Dense, with good adhesion to the substrate, hard, wear-resistant coatings from the powder of Al2O3 were obtained on the surface of the steel (STE255) by using the cumulative-detonation device. The results of investigations of the structure and physico-mechanical properties of the coatings by using scanning, optical microscopy, X-ray phase analysis, microhardness and tribological tests are presented. It was found that optimization of plasma spraying to helps reduce the porosity of coatings of Al2O3 less than 1 % and to increase the hardness of them to 1250 HV0.3. The tribological investigations have shown that the coatings of Al2O3 significantly increase the wear resistance of the sample STE255 and provide a low ability to wear out the coating. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/3546

Regulatory aspects of nanotechnology in the agri/feed/food sector in EU and non-EU countries

n/