The Optical Instrumentation of the ATLAS Tile Calorimeter

The purpose of this Note is to describe the optical assembly procedure called here Optical Instrumentation and the quality tests conducted on the assembled units. Altogether, 65 Barrel (or LB) modules were constructed - including one spare - together with 129 Extended Barrel (EB) modules (including one spare). The LB modules were mechanically assembled at JINR (Dubna, Russia) and transported to CERN, where the optical instrumentation was performed with personnel contributed by several Institutes. The modules composing one of the two Extended Barrels (known as EBA) were mechanically assembled in the USA, and instrumented in two US locations (ANL, U. of Michigan), while the modules of the other Extended barrel (EBC) were assembled in Spain and instrumented at IFAE (Barcelona). Each of the EB modules includes a subassembly known as ITC that contributes to the hermeticity of the calorimeter; all ITCs were assembled at UTA (Texas), and mounted onto the module mechanical structures at the EB mechanical assembly locations.The Tile Calorimeter, covering the central region of the ATLAS experiment up to pseudorapidities of ±1.7, is a sampling device built with scintillating tiles that alternate with iron plates. The light is collected in wave-length shifting (WLS) fibers and is read out with photomultipliers. In the characteristic geometry of this calorimeter the tiles lie in planes perpendicular to the beams, resulting in a very simple and modular mechanical and optical layout. This paper focuses on the procedures applied in the optical instrumentation of the calorimeter, which involved the assembly of about 460,000 scintillator tiles and 550,000 WLS fibers. The outcome is a hadronic calorimeter that meets the ATLAS performance requirements, as shown in this paper

The Production and Qualification of Scintillator Tiles for the ATLAS Hadronic Calorimeter

The production of the scintillator tiles for the ATLAS Tile Calorimeter is presented. In addition to the manufacture and production, the properties of the tiles will be presented including light yield, uniformity and stability

Design, Construction and Installation of the ATLAS Hadronic Barrel Scintillator-Tile Calorimeter

The scintillator tile hadronic calorimeter is a sampling calorimeter using steel as the absorber structure and scintillator as the active medium. The scintillator is located in "pockets" in the steel structure and the wavelength-shifting fibers are contained in channels running radially within the absorber to photomultiplier tubes which are located in the outer support girders of the calorimeter structure. In addition, to its role as a detector for high energy particles, the tile calorimeter provides the direct support of the liquid argon electromagnetic calorimeter in the barrel region, and the liquid argon electromagnetic and hadronic calorimeters in the endcap region. Through these, it indirectly supports the inner tracking system and beam pipe. The steel absorber, and in particular the support girders, provide the flux return for the solenoidal field from the central solenoid. Finally, the end surfaces of the barrel calorimeter are used to mount services, power supplies and readout crates for the inner tracking systems and the liquid argon barrel electromagnetic calorimeter

Mechanical construction and installation of the ATLAS tile calorimeter

This paper summarises the mechanical construction and installation of the Tile Calorimeter for the ATLAS experiment at the Large Hadron Collider in CERN, Switzerland. The Tile Calorimeter is a sampling calorimeter using scintillator as the sensitive detector and steel as the absorber and covers the central region of the ATLAS experiment up to pseudorapidities +/- 1.7. The mechanical construction of the Tile Calorimeter occurred over a period of about 10 years beginning in 1995 with the completion of the Technical Design Report and ending in 2006 with the installation of the final module in the ATLAS cavern. During this period approximately 2600 metric tons of steel were transformed into a laminated structure to form the absorber of the sampling calorimeter. Following instrumentation and testing, which is described elsewhere, the modules were installed in the ATLAS cavern with a remarkable accuracy for a structure of this size and weight

A measurement of the photonuclear interactions of 180 GeV muons in iron: The tilecal system of the ATLAS collaboration

The energy spectrum and the cross section of photonuclear interactions of 180 GeV muons in iron were measured at the CERN SPS using prototype modules of the ATLAS hadron calorimeter. The differential cross section (NA/A)vdσ/dv for a muon fractional energy loss v = ΔEμ/Eμ was measured in the range 0.1<v<1. The integrated cross section (NA/A) ∫0.1 1 vdσ/dv is (0.26 ± 0.03stat ±.03stat) · 10-6 cm2g-1 in agreement with the theoretical prediction of 0.267 · 10-6 cm-2g-1. The best adjustment of the data to the theory is achieved for the value of σγN = (115 ± 18stat ± 15syst)μb of the photon-nucleon cross section for photons with energies in the range from 18 to 180 GeV

The ATLAS hadronic tile calorimeter: from construction toward physics

ATLASThe Tile Calorimeter, which constitutes the central section of the ATLAS hadronic calorimeter, is a non-compensating sampling device made of iron and scintillating tiles. The construction phase of the calorimeter is nearly complete, and most of the effort now is directed toward the final assembly and commissioning in the underground experimental hall. The layout of the calorimeter and the tasks carried out during construction are described, first with a brief reminder of the requirements that drove the calorimeter design. During the last few years a comprehensive test-beam program has been followed in order to establish the calorimeter electromagnetic energy scale, to study its uniformity, and to compare real data to Monte Carlo simulation. The test-beam setup and first results from the data are described. During the test-beam period in 2004, lasting several months, data have been acquired with a complete slice of the central ATLAS calorimeter. The data collected in the test-beam are crucial in order to study algorithms for hadronic energy reconstruction using single particles. The generalization of these algorithms to reconstruct jet energies will be the starting point for numerous physics studies in which jets play a leading role. The results obtained in applying these algorithms to simulated di-jet events are given in the last section of the note

A measurement of the photonuclear interactions of 180 GeV muons in iron

The energy spectrum and the cross section of photonuclear interactions of 180 GeV muons in iron were measured at the CERN SPS using prototype modules of the ATLAS hadron calorimeter. The differential cross section (N-A/A)nudsigma/dnu for a union fractional energy loss nu = E-mu/E-mu was measured in the range 0.1 < nu < 1. The integrated cross section (N-A/A) integral(0.1)(1) nudsigma/dnu is (0.26 +/- 0.03(stat) +/- 0.03(syst)) . 10(-6) cm(2) g(-1) in agreement with the theoretical prediction of 0.267 . 10(-6) cm(2)g(-1). The best adjustment of the data to the theory is achieved for the value of sigma(gamma)N = (115 +/- 18(stat) +/- 15(syst))mub of the photon-nucleon cross section for photons with energies in the range from 18 to 180 GeV

The ATLAS hadronic tile calorimeter: from construction toward physics

The Tile Calorimeter, which constitutes the central section of the ATLAS hadronic calorimeter, is a non-compensating sampling device made of iron and scintillating tiles. The construction phase of the calorimeter is nearly complete, and most of the effort now is directed toward the final assembly and commissioning in the underground experimental hall. The layout of the calorimeter and the tasks carried out during construction are described, first with a brief reminder of the requirements that drove the calorimeter design. During the last few years a comprehensive test-beam program has been followed in order to establish the calorimeter electromagnetic energy scale, to study its uniformity, and to compare real data to Monte Carlo simulation. The test-beam setup and first results from the data are described. During the test-beam period in 2004, lasting several months, data have been acquired with a complete slice of the central ATLAS calorimeter. The data collected in the test-beam are crucial in order to study algorithms for hadronic energy reconstruction using single particles. The generalization of these algorithms to reconstruct jet energies will be the starting point for numerous physics studies in which jets play a leading role. The results obtained in applying these algorithms to simulated di-jet events are given in the last section of the note

A measurement of the photonuclear interactions of 180 GeV muons in iron

The energy spectrum and the cross section of photonuclear interactions of 180 GeV muons in iron were measured at the CERN SPS using prototype modules of the ATLAS hadron calorimeter. The differential cross section (N/sub A//A)vd sigma /dv for a muon fractional energy loss v = Delta E/sub mu //E/sub mu / was measured in the range 0.1< v <1. The integrated cross section (N/sub A//A) integral /sub 0.1//sup 1/ vd sigma /dv is (0.26 +or- 0.03/sub stat/ +or- 0.03/sub syst/).10/sup -6/ cm/sup 2/ g/sup -1/ in agreement with the theoretical prediction of 0.267.10/sup -6/ cm/sup 2/ g/sup -1/. The best adjustment of the data to the theory is achieved for the value of sigma /sub gamma N/ = (115 +or- 18/sub stat/ +or- 15/sub syst/) mu b of the photon-nucleon cross section for photons with energies in the range from 18 to 180 GeV. (17 refs)

The ATLAS hadronic tile calorimeter: From construction toward-physics

The Tile Calorimeter, which constitutes the central section of the ATLAS hadronic calorimeter, is a non-compensating sampling device made of iron and scintillating tiles. The construction phase of the calorimeter is nearly complete, and most of the effort now is directed toward the final assembly and commissioning in the underground experimental hall. The layout of the calorimeter and the tasks carried out during construction are described, first with a brief reminder of the requirements that drove the calorimeter design. During the last few years a comprehensive test-beam program has been followed in order to establish the calorimeter electromagnetic energy scale, to study its uniformity, and to compare real data to Monte Carlo simulation. The test-beam setup and first results from the data are described. During the test-beam period in 2004, lasting several months, data have been acquired with a complete slice of the central ATLAS calorimeter. The data collected in the test-beam are crucial in order to study algorithms for hadronic energy reconstruction using single particles. The generalization of these algorithms to reconstruct jet energies will be the starting point for numerous physics studies in which jets play a leading role. The results obtained in applying these algorithms to simulated di-jet events are given in the last section of the note