Influence of the diatomite specie on the peak and residual shear strength of the fine-grained soil

Diatomite is a powdering mineral mainly composed of diatom microfossils present in marine and lacustrine soils, which influences their physical and mechanical properties. Although many articles have been found in the literature concerning the influence of diatomite in the overall behavior of natural soils, few research efforts have been carried out to evaluate the influence of the diatom microfossil species on their shear resistance. Therefore, in this research, the influence of the diatomite species and the content in the peak and the residual shear strength of diatomite-fine grained soil mixtures was analyzed using the annular shear strength test. Scanning electron microscopy (SEM) and Atterberg limits were also carried out as additional tests to explain the interlocking effect between the microfossils and the soil. Overall, both diatomite species increased both peak and residual shear strength of the soil similar to dense sands. Nevertheless, the Mexican species reveal higher friction angle values compared with Colombian species

Development and validation of a gene expression test to identify hard-to-heal chronic venous leg ulcers

Background: Chronic venous leg ulcers pose a significant burden to healthcare systems, and predicting wound healing is challenging. The aim of this study was to develop a genetic test to evaluate the propensity of a chronic ulcer to heal. Methods: Sequential refinement and testing of a gene expression signature was conducted using three distinct cohorts of human wound tissue. The expression of candidate genes was screened using a cohort of acute and chronic wound tissue and normal skin with quantitative transcript analysis. Genes showing significant expression differences were combined and examined, using receiver operating characteristic (ROC) curve analysis, in a controlled prospective study of patients with venous leg ulcers. A refined gene signature was evaluated using a prospective, blinded study of consecutive patients with venous ulcers. Results: The initial gene signature, comprising 25 genes, could identify the outcome (healing versus non‐healing) of chronic venous leg ulcers (area under the curve (AUC) 0·84, 95 per cent c.i. 0·73 to 0·94). Subsequent refinement resulted in a final 14‐gene signature (WD14), which performed equally well (AUC 0·88, 0·80 to 0·97). When examined in a prospective blinded study, the WD14 signature could also identify wounds likely to demonstrate signs of healing (AUC 0·73, 0·62 to 0·84). Conclusion: A gene signature can identify people with chronic venous leg ulcers that are unlikely to heal

Kapazitive pH-Sensoren auf der Basis von makroporösem Silizium mit Doppelisolatorschicht aus thermisch oxidiertem SiO2 und LPCVD-Si3N4

Halbleitersensoren für den Ionennachweis in wässrigen Lösungen lassen sich einfach und kostengünstig als kapazitive Feldeffektstrukturen in Form von sogenannten EIS- (Elektrolyt-Isolator-Silizium) Sensoren realisieren. Allerdings sind solche Sensoren begrenzt miniaturisierbar, da ihre geometrische Fläche direkt proportional in das Meßsignal, die Kapazitätsänderung, eingeht. Um diesen Nachteil zu umgehen, haben wir auf dem ersten BioSensorSymposium in München (1999) einen neuartigen Lösungsansatz vorgeschlagen, bei dem makroporöses Silizium als Basismaterial für verschiedene sensoraktive Substanzen, wie z.B. pH-sensitive Schichten und Enzyme eingesetzt werden kann. Bei der Verwendung von makroporösem Silizium als Transducermaterial hat die durch den Herstellungsprozeß bedingte Vergrößerung der sensoraktiven Oberfläche nämlich eine Zunahme der Meßkapazität zur Folge. Aufgrund der Ätzanordnung zur Herstellung von porösem Silizium war es bisher allerdings nur möglich, Niedertemperaturprozesse, wie das PECVD (Plasma-Enhanced-Chemical-Vapour-Deposition)-Verfahren, zur Abscheidung von SiO2 als Isolatorschicht und Si3N4 als pH-sensitiver Schicht zu verwenden. Solche Sensoren besitzen allerdings keine hohe Langzeitstabilität im Meßbetrieb (ca. 2 Monate), da die dielektrischen Schichten unzureichende Korrosionseigenschaften aufweisen. Zur Verbesserung der Langzeitstabilität von Sensoren aus porösem Silizium bietet sich die Verwendung von thermisch oxidiertem Silizium als Isolatorschicht und das Abscheiden von Siliziumnitrid als pH-sensitive Schicht mittels LPCVD (Low-Pressure- Chemical-Vapour-Deposition)-Verfahren an. Vorangegangene Arbeiten aus unserer Arbeitsgruppe hatten gezeigt, daß planare Sensoren mit LPCVD-Nitrid als Transducermaterial über einen Zeitraum von sieben Monaten konstant hohe Sensitivitäten nahe dem Nernst-Idealwert aufweisen

Surface critical exponents at a uniaxial Lifshitz point

Using Monte Carlo techniques, the surface critical behaviour of three-dimensional semi-infinite ANNNI models with different surface orientations with respect to the axis of competing interactions is investigated. Special attention is thereby paid to the surface criticality at the bulk uniaxial Lifshitz point encountered in this model. The presented Monte Carlo results show that the mean-field description of semi-infinite ANNNI models is qualitatively correct. Lifshitz point surface critical exponents at the ordinary transition are found to depend on the surface orientation. At the special transition point, however, no clear dependency of the critical exponents on the surface orientation is revealed. The values of the surface critical exponents presented in this study are the first estimates available beyond mean-field theory.Comment: 10 pages, 7 figures include

[Editorial] Migration, adult education and learning

No description supplie

Modified critical correlations close to modulated and rough surfaces

Correlation functions are sensitive to the presence of a boundary. Surface modulations give rise to modified near surface correlations, which can be measured by scattering probes. To determine these correlations, we develop a perturbative calculation in deformations in height from a flat surface. The results, combined with a renormalization group around four dimensions, are also used to predict critical behavior near a self-affinely rough surface. We find that a large enough roughness exponent can modify surface critical behavior.Comment: 4 pages, 1 figure. Revised version as published in Phys. Rev. Lett. 86, 4596 (2001

Boundary critical behaviour at mm-axial Lifshitz points: the special transition for the case of a surface plane parallel to the modulation axes

The critical behaviour of $d$-dimensional semi-infinite systems with $n$-component order parameter $\bm{\phi}$ is studied at an $m$-axial bulk Lifshitz point whose wave-vector instability is isotropic in an $m$-dimensional subspace of $\mathbb{R}^d$. Field-theoretic renormalization group methods are utilised to examine the special surface transition in the case where the $m$ potential modulation axes, with $0\leq m\leq d-1$, are parallel to the surface. The resulting scaling laws for the surface critical indices are given. The surface critical exponent $\eta_\|^{\rm sp}$, the surface crossover exponent $\Phi$ and related ones are determined to first order in \epsilon=4+\case{m}{2}-d. Unlike the bulk critical exponents and the surface critical exponents of the ordinary transition, $\Phi$ is $m$-dependent already at first order in $\epsilon$. The \Or(\epsilon) term of $\eta_\|^{\rm sp}$ is found to vanish, which implies that the difference of $\beta_1^{\rm sp}$ and the bulk exponent $\beta$ is of order $\epsilon^2$.Comment: 21 pages, one figure included as eps file, uses IOP style file

Renormalized couplings and scaling correction amplitudes in the N-vector spin models on the sc and the bcc lattices

For the classical N-vector model, with arbitrary N, we have computed through order \beta^{17} the high temperature expansions of the second field derivative of the susceptibility \chi_4(N,\beta) on the simple cubic and on the body centered cubic lattices. (The N-vector model is also known as the O(N) symmetric classical spin Heisenberg model or, in quantum field theory, as the lattice O(N) nonlinear sigma model.) By analyzing the expansion of \chi_4(N,\beta) on the two lattices, and by carefully allowing for the corrections to scaling, we obtain updated estimates of the critical parameters and more accurate tests of the hyperscaling relation d\nu(N) +\gamma(N) -2\Delta_4(N)=0 for a range of values of the spin dimensionality N, including N=0 [the self-avoiding walk model], N=1 [the Ising spin 1/2 model], N=2 [the XY model], N=3 [the classical Heisenberg model]. Using the recently extended series for the susceptibility and for the second correlation moment, we also compute the dimensionless renormalized four point coupling constants and some universal ratios of scaling correction amplitudes in fair agreement with recent renormalization group estimates.Comment: 23 pages, latex, no figure

Casimir forces in binary liquid mixtures

If two ore more bodies are immersed in a critical fluid critical fluctuations of the order parameter generate long ranged forces between these bodies. Due to the underlying mechanism these forces are close analogues of the well known Casimir forces in electromagnetism. For the special case of a binary liquid mixture near its critical demixing transition confined to a simple parallel plate geometry it is shown that the corresponding critical Casimir forces can be of the same order of magnitude as the dispersion (van der Waals) forces between the plates. In wetting experiments or by direct measurements with an atomic force microscope the resulting modification of the usual dispersion forces in the critical regime should therefore be easily detectable. Analytical estimates for the Casimir amplitudes Delta in d=4-epsilon are compared with corresponding Monte-Carlo results in d=3 and their quantitative effect on the thickness of critical wetting layers and on force measurements is discussed.Comment: 34 pages LaTeX with revtex and epsf style, to appear in Phys. Rev.