Остаточный энергетический потенциал низкокалорийных отходов угольного производства: критерии оценки

Розглянуто загальні проблеми, пов’язані із залученням до господарського обороту низькокалорійних відходів видобування і збагачення вугілля. Наведено результати систематизації і узагальнення інформації про їх технічні характеристики, викладено методичні підходи до вибору критеріїв оцінки їх енергетичного потенціалу. Ключові слова: вугілля, енергозбереження, відходи виробництва, вторинні ресурси.Рассмотрены общие проблемы, связанные с вовлечением в хозяйственный оборот низкокалорийных отходов добычи и обогащения угля. Приведены результаты систематизации и обобщения информации об их технических характеристиках, изложены методические подходы к выбору критериев оценки их энергетического потенциала. Ключевые слова: уголь, энергосбережение, отходы производства, вторичные ресурсы.The general problems connected with involving of low-calorie wastes of mining process and coal enrichment into economic turnover are considered. The results of systematization and generalization of the information about their technical characteristics are shown; methodical approaches to choosing the criteria of estimation of their energy potential are presented. Keywords: coal, energy saving, production wastes, secondary resources

Measuring and modeling the effect of surface moisture on the spectral reflectance of coastal beach sand

Surface moisture is an important supply limiting factor for aeolian sand transport, which is the primary driver of coastal dune development. As such, it is critical to account for the control of surface moisture on available sand for dune building. Optical remote sensing has the potential to measure surface moisture at a high spatio-temporal resolution. It is based on the principle that wet sand appears darker than dry sand: it is less reflective. The goals of this study are (1) to measure and model reflectance under controlled laboratory conditions as function of wavelength () and surface moisture () over the optical domain of 350–2500 nm, and (2) to explore the implications of our laboratory findings for accurately mapping the distribution of surface moisture under natural conditions. A laboratory spectroscopy experiment was conducted to measure spectral reflectance (1 nm interval) under different surface moisture conditions using beach sand. A non-linear increase of reflectance upon drying was observed over the full range of wavelengths. Two models were developed and tested. The first model is grounded in optics and describes the proportional contribution of scattering and absorption of light by pore water in an unsaturated sand matrix. The second model is grounded in soil physics and links the hydraulic behaviour of pore water in an unsaturated sand matrix to its optical properties. The optical model performed well for volumetric moisture content 24% ( 0.97), but underestimated reflectance for between 24–30% ( 0.92), most notable around the 1940 nm water absorption peak. The soil-physical model performed very well ( 0.99) but is limited to 4% 24%. Results from a field experiment show that a short-wave infrared terrestrial laser scanner ( = 1550 nm) can accurately relate surface moisture to reflectance (standard error 2.6%), demonstrating its potential to derive spatially extensive surface moisture maps of a natural coastal beach

Sediment suspension under breaking waves

The file consists of six data records of cross-shore, longshore and vertical velocity, water depth and sediment concentrations at six elevations. The records were obtained under plunging (PL) and spilling (SP) wave breaking conditions at Vejers Beach, Denmark, in the fall of 2007

Infragravity-wave modulation of short-wave celerity in the surf zone

International audienceThe cross-shore evolution of individual wave celerity is investigated using two high-resolution laboratory experiments on bichromatic waves. Individual waves are tracked during their onshore propagation and their characteristics, including celerity, are estimated. The intrawave variability in celerity is low in the shoaling zone but increases strongly after breaking. It is maximum when the infragravity-wave height to water depth ratio is the largest, that is to say close to the shoreline. There the observed range of individual wave celerity can be as large as the mean celerity value. This variability can be largely explained by the variations in water depth and velocity induced by the infragravity waves. The differences in celerity are such that they lead to the merging of the waves in the inner surf zone for most of the wave conditions considered. Again, the location at which the first waves start merging strongly correlates with the infragravity-wave height to water depth ratio. The consequences of these findings for celerity-based depth-inversion techniques are finally discussed. Surprisingly, accounting for the infragravity-wave modulation of the velocity field in the celerity estimate does not significantly improve depth estimation in the surf zone. However, it is shown that the occurrence of bore merging decreases significantly the coherence of the wavefield in the surf zone. This loss of coherence could hamper celerity estimation from pixel intensity time series and explain, at least partly, the relatively poor performance of depth-inversion techniques in the inner surf zone

Observations of intra-wave suspended sediment transport under acceleration-skewed oscillatory flow

International audienc

Measuring spatial and temporal variation in surface moisture on a coastal beach with a near-infrared terrestrial laser scanner

Wind-alone predictions of aeolian sand deposition on the most seaward coastal dune ridge often exceed measured deposition substantially. Surface moisture is a major factor limiting aeolian transport on sandy beaches, but existing measurement techniques cannot adequately characterize the spatial and temporal distribution of surface moisture content. Here, we present a new method for detecting surface moisture at high temporal and spatial resolution using a near-infrared terrestrial laser scanner (TLS), the RIEGL VZ-400. Because this TLS operates at a wavelength (1550. nm) near a water absorption band, TLS reflectance is an accurate parameter to measure surface moisture over its full range. Five days of intensive laser scanning were performed on a Dutch beach to illustrate the applicability of the TLS. Gravimetric surface moisture samples were used to calibrate the relation between reflectance and surface moisture. Results reveal a robust negative relation for the full range of possible surface moisture contents (0%-25%), with a correlation-coefficient squared of 0.85 and a root-mean-square error of 2.7%. This relation holds between 20 and 60. m from the TLS. Within this distance the TLS typically produces O(106-107) data points, which we averaged into surface moisture maps with a 1. ×. 1. m resolution. This grid size largely removes small reflectance disturbances induced by, for example, footprints or tire tracks, while retaining larger scale moisture trends

Tide-induced variability in beach surface moisture: Observations and modelling

The moisture content ws of a beach surface strongly controls the availability of sand for aeolian transport. Our predictive capability of the spatiotemporal variability in ws, which depends to a large extent on water table depth, is, however, limited. Here we show that water table fluctuations and surface moisture content observed during a 10‐day period on a medium‐grained (365μm) planar (1:30) beach can be predicted well with the nonlinear Boussinesq equation extended to include run‐up infiltration and a soil–water retention curve under the assumption of hydrostatic equilibrium. On the intertidal part of the beach the water table is observed and predicted to continuously fall from the moment the beach surface emerges from the falling tide to just before it is submerged by the incoming tide. We find that on the lower 30% of the intertidal beach the water table remains within 0.1–0.2 m from the surface and that the sand is always saturated (ws≈20%, by mass). Higher up on the intertidal beach, the surface can dry to about 5% when the water table has fallen to 0.4–0.5 m beneath the surface. Above the high‐tide level the water table is always too deep (>0.5 m) to affect surface moisture and, without precipitation, the sand is dry (ws  <  5 − 8%). Because the water table depth on the emerged part of the intertidal beach increases with time irrespective of whether the (ocean) tide falls or rises, we find no need to include hysteresis (wetting and drying) effects in the surface‐moisture modelling. Model simulations suggest that at the present planar beach only the part well above mean sea level can dry sufficiently (ws  <  10%) for sand to become available for aeolian transport. ©2018 The Authors

Tide-induced variability in beach surface moisture: Observations and modelling

The moisture content ws of a beach surface strongly controls the availability of sand for aeolian transport. Our predictive capability of the spatiotemporal variability in ws, which depends to a large extent on water table depth, is, however, limited. Here we show that water table fluctuations and surface moisture content observed during a 10‐day period on a medium‐grained (365μm) planar (1:30) beach can be predicted well with the nonlinear Boussinesq equation extended to include run‐up infiltration and a soil–water retention curve under the assumption of hydrostatic equilibrium. On the intertidal part of the beach the water table is observed and predicted to continuously fall from the moment the beach surface emerges from the falling tide to just before it is submerged by the incoming tide. We find that on the lower 30% of the intertidal beach the water table remains within 0.1–0.2 m from the surface and that the sand is always saturated (ws≈20%, by mass). Higher up on the intertidal beach, the surface can dry to about 5% when the water table has fallen to 0.4–0.5 m beneath the surface. Above the high‐tide level the water table is always too deep (>0.5 m) to affect surface moisture and, without precipitation, the sand is dry (ws  <  5 − 8%). Because the water table depth on the emerged part of the intertidal beach increases with time irrespective of whether the (ocean) tide falls or rises, we find no need to include hysteresis (wetting and drying) effects in the surface‐moisture modelling. Model simulations suggest that at the present planar beach only the part well above mean sea level can dry sufficiently (ws  <  10%) for sand to become available for aeolian transport. ©2018 The Authors

Measuring spatial and temporal variation in surface moisture on a coastal beach with a near-infrared terrestrial laser scanner

Wind-alone predictions of aeolian sand deposition on the most seaward coastal dune ridge often exceed measured deposition substantially. Surface moisture is a major factor limiting aeolian transport on sandy beaches, but existing measurement techniques cannot adequately characterize the spatial and temporal distribution of surface moisture content. Here, we present a new method for detecting surface moisture at high temporal and spatial resolution using a near-infrared terrestrial laser scanner (TLS), the RIEGL VZ-400. Because this TLS operates at a wavelength (1550. nm) near a water absorption band, TLS reflectance is an accurate parameter to measure surface moisture over its full range. Five days of intensive laser scanning were performed on a Dutch beach to illustrate the applicability of the TLS. Gravimetric surface moisture samples were used to calibrate the relation between reflectance and surface moisture. Results reveal a robust negative relation for the full range of possible surface moisture contents (0%-25%), with a correlation-coefficient squared of 0.85 and a root-mean-square error of 2.7%. This relation holds between 20 and 60. m from the TLS. Within this distance the TLS typically produces O(106-107) data points, which we averaged into surface moisture maps with a 1. ×. 1. m resolution. This grid size largely removes small reflectance disturbances induced by, for example, footprints or tire tracks, while retaining larger scale moisture trends