485 research outputs found
Absolute Timing of the Crab Pulsar with RXTE
We have monitored the phase of the main X-ray pulse of the Crab pulsar with
the Rossi X-ray Timing Explorer (RXTE) for almost eight years, since the start
of the mission in January 1996. The absolute time of RXTE's clock is
sufficiently accurate to allow this phase to be compared directly with the
radio profile. Our monitoring observations of the pulsar took place bi-weekly
(during the periods when it was at least 30 degrees from the Sun) and we
correlated the data with radio timing ephemerides derived from observations
made at Jodrell Bank. We have determined the phase of the X-ray main pulse for
each observation with a typical error in the individual data points of 50 us.
The total ensemble is consistent with a phase that is constant over the
monitoring period, with the X-ray pulse leading the radio pulse by
0.0102+/-0.0012 period in phase, or 344+/-40 us in time. The error estimate is
dominated by a systematic error of 40 us in the radio data, arising from
uncertainties in the variable amount of pulse delay due to interstellar
scattering and instrumental calibration. The statistical error is 0.00015
period, or 5 us. The separation of the main pulse and interpulse appears to be
unchanging at time scales of a year or less, with an average value of
0.4001+/-0.0002 period. There is no apparent variation in these values with
energy over the 2-30 keV range. The lag between the radio and X-ray pulses may
be constant in phase (rotational) or constant in time (linear pathlength). We
are not (yet) able to distinguish between these two interpretations.Comment: 11 pages, 2 figure
C1â Continuous crack propagation for mixed-mode fracture problems
In this work a C1â continuous crack propagation algorithm is proposed to improve the numerical simulation of localized deformation patterns, using higher order elements. The algorithm is applied for a standard smeared crack model and is validated by a mixed-mode fracture problem. From the results a reduction of mesh-induced directional bias is observed
Critical analysis on the use of the shove test for investigating the shear-sliding behavior of brick masonry
The shove test (ASTM Standard C1531) is an experimental technique aimed at studying the shear-sliding behavior of brick masonry. It can be executed according to various testing methods that differ in the way the vertical compression load is applied and in the way bricks and/or joints are locally removed for inserting jacks. One of the most critical aspects is the correct evaluation of the compressive stress state on the sliding brick. The objective of the present paper is to investigate the capability of the shove test in determining the shear strength parameters of brick masonries and to highlight the main advantages and disadvantages of the various testing methods. To this aim, nonlinear numerical simulations of the shove test were performed by adopting a brick-to-brick modeling strategy. The 2D numerical model was calibrated and validated through comparisons with experimental results of triplet tests and shove tests. The numerical analyses allowed to understand the influence the different testing methods and the masonry mechanical properties, such as dilatancy, may have on the test results. Based on the numerical outcomes, correction factors were calibrated for the proper evaluation of the compressive stress state on the sliding brick. Improvements with regards to the experimental procedures, i.e. additional test phases and measurements, were also proposed to enhance the results interpretation
SN1993J VLBI (I): The Center of the Explosion and a Limit on Anisotropic Expansion
Phase-referenced VLBI observations of supernova 1993J at 24 epochs, from 50
days after shock breakout to the present, allowed us to determine the
coordinates of the explosion center relative to the quasi-stationary core of
the host galaxy M81 with an accuracy of 45 micro-arcsec, and to determine the
nominal proper motion of the geometric center of the radio shell with an
accuracy of 9micro-arcsec/yr. The uncertainties correspond to 160 AU for the
position and 160 km/s for the proper motion at the distance of the source of
3.63 Mpc. After correcting for the expected galactic proper motion of the
supernova around the core of M81 using HI rotation curves, we obtain a peculiar
proper motion of the radio shell center of only 320 +/- 160 km/s to the south,
which limits any possible one-sided expansion of the shell. We also find that
the shell is highly circular, the outer contours in fact being circular to
within 3%. Combining our proper motion values with the degree of circular
symmetry, we find that the expansion of the shockfront from the explosion
center is isotropic to within 5.5% in the plane of the sky. This is a more
fundamental result on isotropic expansion than can be derived from the
circularity of the images alone. The brightness of the radio shell, however,
varies along the ridge and systematically changes with time. The degree of
isotropy in the expansion of the shockfront contrasts with the asymmetries and
polarization found in optical spectral lines. Asymmetric density distributions
in the ejecta or more likely in the circumstellar medium, are favored to
reconcile the radio and optical results. We see no sign of any disk-like
density distribution of the circumstellar material, with the average axis ratio
of the radio shell of SN1993J being less than 1.04.Comment: 21 pages, LaTex + 5 Figures (encapulsated PostScript), Accepted for
Publication in the Astrophysical Journa
A damaging block-based model for the analysis of the cyclic behaviour of full-scale masonry structures
In this paper, a damaging block-based model is proposed for the numerical analysis of the cyclic behaviour of full-scale masonry structures. Solid 3D finite elements governed by a plastic-damage constitutive law in tension and compression are used to model the blocks, while a cohesive-frictional contact-based formulation is developed to simulate their cyclic interaction. The use of tests on small-scale specimens to calibrate the mechanical properties of the numerical model is presented and discussed. The tests belong to a comprehensive experimental campaign performed on calcium silicate brick masonry. The calibrated models are used to simulate in-plane and out-of-plane cyclic tests on masonry walls made of the same material, as well as a quasi-static cyclic pushover test on a full-scale terraced masonry house. The efficiency, the potentialities and the accuracy of the model here proposed are shown and discussed. The capability of explicitly representing structural details (e.g. running bonds) and any in-plane and through-thickness texture of masonry, which appears essential to study the response of masonry structures, is guaranteed by the block-based modelling approach. A good agreement between the numerical results and the experimental outcomes is observed. This allows to validate the model in the cyclic response as well as the strategy proposed for its mechanical characterization
Regulatory Impact Assessment: A survey of selected developing and emerging economies
Regulatory impact assessment (RIA) involves a systematic appraisal of the
social, economic and environmental impacts of proposed regulations and other
kinds of policy instruments before they are adopted. A vast amount of academic
literature in the last decade has charted the diffusion of RIA in OECD
countries and EU member states. However, relatively little is known about the
extent to which RIA has been adopted and implemented in developing countries.
The last research attempting to shed light on this issue over a decade ago
found that a number of were beginning to apply some form of regulatory
assessment but that its development was at an early stage. Since then RIA has
become almost universally adopted in OECD and EU member states as well as
promoted as a tool for good (regulatory) governance in developing countries by
international donors and organizations such as OECD, the International Finance
Corporation of the World Bank Group (IFC). What, then, is the extent of RIA
adoption and implementation in these countries today? This working paper
addresses this question through a survey of RIA in 14 developing and emerging
economies based on documentary analysis as well as semi-structured interviews
with key stakeholders. The survey explores topics such as the legal and
institutional framework of RIA, organizational capacity, and use of tools and
methods (e.g. Cost Benefit Analysis). The results suggest that while an
increasing number of developing countries have made efforts to introduce RIA
in their decision making processes, these efforts have not yet led to a
sustainable RIA system which significantly contributes to the good regulatory
governance of these countries
The Time-Variable Ultra-Luminous X-ray Sources of "The Antennae"
We report the first results of the Chandra temporal monitoring of the
ultra-luminous X-ray sources (ULXs) in the Antennae galaxies (NGC 4038/39).
Observations at four different epochs, covering time scales of 2 years to 2
months, show variability in seven out of nine ULXs, confirming that they are
likely to be accreting compact X-ray binaries (XRBs). The seven variable ULXs
exhibit a variety of temporal and spectral behaviors: one has harder X-ray
colors with decreasing luminosity, similar to the black hole binary Cyg X-1,
but four other ULXs show the opposite behavior. We suggest that the latter may
be black-hole binaries accreting at very high rates.Comment: 3 pages, 3 figures, 1 table In press in Ap. J. Letter
Chemical enrichment of the complex hot ISM of the Antennae galaxies: I. Spatial and spectral analysis of the diffuse X-ray emission
We present an analysis of the properties of the hot interstellar medium (ISM)
in the merging pair of galaxies known as The Antennae (NGC 4038/39), performed
using the deep, coadded ~411 ks Chandra ACIS-S data set. These deep X-ray
observations and Chandra's high angular resolution allow us to investigate the
properties of the hot ISM with unprecedented spatial and spectral resolution.
Through a spatially resolved spectral analysis, we find a variety of
temperatures (from 0.2 to 0.7 keV) and Nh (from Galactic to 2x10^21 cm^-2).
Metal abundances for Ne, Mg, Si, and Fe vary dramatically throughout the ISM
from sub-solar values (~0.2) up to several times solar.Comment: 33 pages, 18 figures, revised version accepted by Astrophysical
Journal Supplement Serie
The Eastern Arm of M83 Revisited: High-Resolution Mapping of 12CO 1-0 Emission
We have used the Owens Valley Millimeter Array to map 12CO (J=1-0) along a
3.5 kpc segment of M83's eastern spiral arm at resolutions of 6.5"x3.5", 10",
and 16". The CO emission in most of this segment lies along the sharp dust lane
demarking the inner edge of the spiral arm, but beyond a certain point along
the arm the emission shifts downstream from the dust lane to become better
aligned with the young stars seen in blue and H-beta images. This morphology
resembles that of the western arm of M100. Three possibilities, none of which
is wholly satisfactory, are considered to explain the deviation of the CO arm
from the dust lane: heating of the CO by UV radiation from young stars, heating
by low-energy cosmic rays, and a molecular medium consisting of two (diffuse
and dense) components which react differently to the density wave. Regardless,
the question of what CO emission traces along this spiral arm is a complicated
one. Strong tangential streaming is observed where the arm crosses the
kinematic major axis of the galaxy, implying that the shear becomes locally
prograde in the arms. Inferred from the streaming is a very high gas surface
density of about 230 solar masses/pc**2 and an arm-interarm contrast greater
than 2.3 in the part of the arm near the major axis. Using two different
criteria, we find that the gas at this location is well above the threshold for
gravitational instability -- much more clearly so than in either M51 or M100.Comment: Accepted for publication in ApJ. 25 pages, 5 figures. Manuscript in
LaTeX, figures in pdf. Fig 3 in colo
Chemical enrichment of the complex hot ISM of the Antennae Galaxies: II. Physical properties of the hot gas and supernova feedback
We investigate the physical properties of the interstellar medium (ISM) in
the merging pair of galaxies known as The Antennae (NGC 4038/39), using the
deep coadded ~411 ks Chandra ACIS-S data set. The method of analysis and some
of the main results from the spectral analysis, such as metal abundances and
their variations from ~0.2 to ~20-30 times solar, are described in Paper I
(Baldi et al. submitted). In the present paper we investigate in detail the
physics of the hot emitting gas, deriving measures for the hot-gas mass (~10^
M_sun), cooling times (10^7-10^8 yr), and pressure (3.5x10^-11-2.8x10^-10 dyne
cm^-2). At least in one of the two nuclei (NGC 4038) the hot-gas pressure is
significantly higher than the CO pressure, implying that shock waves may be
driven into the CO clouds. Comparison of the metal abundances with the average
stellar yields predicted by theoretical models of SN explosions points to SNe
of Type II as the main contributors of metals to the hot ISM. There is no
evidence of any correlation between radio-optical star-formation indicators and
the measured metal abundances. Although due to uncertainties in the average gas
density we cannot exclude that mixing may have played an important role, the
short time required to produce the observed metal masses (<=2 Myr) suggests
that the correlations are unlikely to have been destroyed by efficient mixing.
More likely, a significant fraction of SN II ejecta may be in a cool phase, in
grains, or escaping in hot winds. In each case, any such fraction of the ejecta
would remain undetectable with soft X-ray observations.Comment: 29 pages, 6 figures, accepted by the Astrophysical Journa
- âŠ