3,356 research outputs found

    Visualization of Minkowski operations by computer graphics techniques

    Get PDF
    We consider the problem of visualizing 3D objects defined as a Minkowski addition or subtraction of elementary objects. It is shown that such visualizations can be obtained by using techniques from computer graphics such as ray tracing and Constructive Solid Geometry. Applications of the method are found in solid modelling and shape description.

    A mathematical model for electrical stimulation of a monolayer of cardiac cells

    Get PDF
    BACKGROUND: The goal of our study is to examine the effect of stimulating a two-dimensional sheet of myocardial cells. We assume that the stimulating electrode is located in a bath perfusing the tissue. METHODS: An equation governing the transmembrane potential, based on the continuity equation and Ohm's law, is solved numerically using a finite difference technique. RESULTS: The sheet is depolarized under the stimulating electrode and is hyperpolarized on each side of the electrode along the fiber axis. CONCLUSIONS: The results are similar to those obtained previously by Sepulveda et al. (Biophys J, 55: 987–999, 1989) for stimulation of a two-dimensional sheet of tissue with no perfusing bath present

    PRIMARY PREVENTION OF VERRUCA PLANTARIS THROUGH TOPICAL HERBAL AND VITAMIN DERIVATIVE

    Get PDF
    Objective: Verrucae plantaris (VP) results from environmental exposure to human papillomavirus causing plantar warts of the foot, resistantto treatment, and high recurrence rates. Current treatment paradigms focus on the treatment of lesions as opposed to primary prophylaxis. Wehypothesize that a topical combination of herbal supplement with anti-viral properties and a vitamin derivative* can be used prophylactically todecrease the primary incidence.Methods: We initiated a double-blinded clinical study with participants (n=282) randomization into control (lotion emollient only) (n=120),treatment (herbal and vitamin derivative) (n=110) and no treatment (NT) (n=52). Participants underwent examination of the feet at baseline (0months) to exclude VP lesions and were randomized to receive a bottle containing topical lotion with emollient only, control (C), lotion with an herbaland vitamin derivative, treatment (T), or NT, where participants did not apply anything to their feet. C and T participants applied lotion topically to thefeet once daily and were examined at 3, 6, 9, and 12 months to document the incidence of VP.Results: No incidence of VP occurred in the T group (0/110=0% incidence), two lesions in the C group (2/120=1.7% incidence), and five lesions inthe NT group (5/52=9.6% incidence).Conclusion: Treatments for VP rely on treating lesions after they occur, have high degrees of variability in success, risk of continued transmissionduring treatment, and have high rates of recurrence. Although the study number is relatively low, early indications show decreasing incidence ofVP from 9.6% in participants with NT to 1.7% in participants who used lotion only, suggesting increased health of the plantar epidermis, and 0%incidence in those participants applying topical herbal and vitamin derivative*. Additional study with increased numbers of participants is warranted

    A 3D computed tomography based tool for orthopedic surgery planning

    Get PDF
    Series : Lecture notes in computational vision and biomechanics, vol. 19The preparation of a plan is essential for a surgery to take place in the best way possible and also for shortening patient’s recovery times. In the orthopedic case, planning has an accentuated significance due to the close relation between the degree of success of the surgery and the patient recovering time. It is important that surgeons are provided with tools that help them in the planning task, in order to make it more reliable and less time consuming. In this paper, we present a 3D Computed Tomography based solution and its implementation as an OsiriX plugin for orthopedic surgery planning. With the developed plugin, the surgeon is able to manipulate a three-dimensional isosurface rendered from the selected imaging study (a CT scan). It is possible to add digital representations of physical implants (surgical templates), in order to evaluate the feasibility of a plan. These templates are STL files generated from CAD models. There is also the feature to extract new isosurfaces of different voxel values and slice the final 3D model according to a predefined plane, enabling a 2D analysis of the planned solution. Finally, we discuss how the proposed application assists the surgeon in the planning process in an alternative way, where it is possible to three-dimensionally analyze the impact of a surgical intervention on the patient.(undefined

    Turbulent flow at 190 m height above London during 2006-2008: A climatology and the applicability of similarity theory

    Get PDF
    Flow and turbulence above urban terrain is more complex than above rural terrain, due to the different momentum and heat transfer characteristics that are affected by the presence of buildings (e.g. pressure variations around buildings). The applicability of similarity theory (as developed over rural terrain) is tested using observations of flow from a sonic anemometer located at 190.3 m height in London, U.K. using about 6500 h of data. Turbulence statistics—dimensionless wind speed and temperature, standard deviations and correlation coefficients for momentum and heat transfer—were analysed in three ways. First, turbulence statistics were plotted as a function only of a local stability parameter z/Λ (where Λ is the local Obukhov length and z is the height above ground); the σ_i/u_* values (i = u, v, w) for neutral conditions are 2.3, 1.85 and 1.35 respectively, similar to canonical values. Second, analysis of urban mixed-layer formulations during daytime convective conditions over London was undertaken, showing that atmospheric turbulence at high altitude over large cities might not behave dissimilarly from that over rural terrain. Third, correlation coefficients for heat and momentum were analyzed with respect to local stability. The results give confidence in using the framework of local similarity for turbulence measured over London, and perhaps other cities. However, the following caveats for our data are worth noting: (i) the terrain is reasonably flat, (ii) building heights vary little over a large area, and (iii) the sensor height is above the mean roughness sublayer depth

    Can ultrasound be used to stimulate nerve tissue?

    Get PDF
    BACKGROUND: The stimulation of nerve or cortical tissue by magnetic induction is a relatively new tool for the non-invasive study of the brain and nervous system. Transcranial magnetic stimulation (TMS), for example, has been used for the functional mapping of the motor cortex and may have potential for treating a variety of brain disorders. METHODS AND RESULTS: A new method of stimulating active tissue is proposed by propagating ultrasound in the presence of a magnetic field. Since tissue is conductive, particle motion created by an ultrasonic wave will induce an electric current density generated by Lorentz forces. An analytical derivation is given for the electric field distribution induced by a collimated ultrasonic beam. An example shows that peak electric fields of up to 8 V/m appear to be achievable at the upper range of diagnostic intensities. This field strength is about an order of magnitude lower than fields typically associated with TMS; however, the electric field gradients induced by ultrasound can be quite high (about 60 kV/m(2 )at 4 MHz), which theoretically play a more important role in activation than the field magnitude. The latter value is comparable to TMS-induced gradients. CONCLUSION: The proposed method could be used to locally stimulate active tissue by inducing an electric field in regions where the ultrasound is focused. Potential advantages of this method compared to TMS is that stimulation of cortical tissue could be highly localized as well as achieved at greater depths in the brain than is currently possible with TMS

    A low density of 0.8 g/cc for the Trojan binary asteroid 617 Patroclus

    Full text link
    The Trojan population consists of two swarms of asteroids following the same orbit as Jupiter and located at the L4 and L5 Lagrange points of the Jupiter-Sun system (leading and following Jupiter by 60 degrees). The asteroid 617 Patroclus is the only known binary Trojan (Merline et al. 2001). The orbit of this double system was hitherto unknown. Here we report that the components, separated by 680 km, move around the system centre of mass, describing roughly a circular orbit. Using the orbital parameters, combined with thermal measurements to estimate the size of the components, we derive a very low density of 0.8 g/cc. The components of Patroclus are therefore very porous or composed mostly of water ice, suggesting that they could have been formed in the outer part of the solar system.Comment: 10 pages, 3 figures, 1 tabl

    Rapid development of non-alcoholic steatohepatitis in Psammomys obesus (Israeli sand rat)

    Get PDF
    Background and Aims: A major impediment to establishing new treatments for non-alcoholic steatohepatitis is the lack of suitable animal models that accurately mimic the biochemical and metabolic characteristics of the disease. The aim of this study was to explore a unique polygenic animal model of metabolic disease as a model of non-alcoholic steatohepatitis by determining the effects of 2% dietary cholesterol supplementation on metabolic and liver endpoints in Psammomys obesus (Israeli sand rat). Methods: P. obesus were provided ad libitum access to either a standard rodent diet (20% kcal/fat) or a standard rodent diet supplemented with 2% cholesterol (w/w) for 4 weeks. Histological sections of liver from animals on both diets were examined for key features of non-alcoholic steatohepatitis. The expression levels of key genes involved in hepatic lipid metabolism were measured by real-time PCR. Results: P. obesus fed a cholesterol-supplemented diet exhibited profound hepatomegaly and steatosis, and higher plasma transaminase levels. Histological analysis identified extensive steatosis, inflammation, hepatocyte injury and fibrosis. Hepatic gene expression profiling revealed decreased expression of genes involved in delivery and uptake of lipids, and fatty acid and triglyceride synthesis, and increased expression of genes involved in very low density lipoprotein cholesterol synthesis, triglyceride and cholesterol export. Conclusions: P. obesus rapidly develop non-alcoholic steatohepatitis when fed a cholesterol-supplemented diet that appears to be histologically and mechanistically similar to patients. © 2014 Spolding et al
    corecore