957 research outputs found
Laboratory-Model Integrated-System FARAD Thruster
Pulsed inductive plasma accelerators are spacecraft propulsion devices in which energy is stored in a capacitor and then discharged through an inductive coil. The device is electrodeless, inducing a plasma current sheet in propellant located near the face of the coil. The propellant is accelerated and expelled at a high exhaust velocity (order of 10 km/s) through the interaction of the plasma current with an induced magnetic field. The Faraday Accelerator with RF-Assisted Discharge (FARAD) thruster [1,2] is a type of pulsed inductive plasma accelerator in which the plasma is preionized by a mechanism separate from that used to form the current sheet and accelerate the gas. Employing a separate preionization mechanism in this manner allows for the formation of an inductive current sheet at much lower discharge energies and voltages than those found in previous pulsed inductive accelerators like the Pulsed Inductive Thruster (PIT). In a previous paper [3], the authors presented a basic design for a 100 J/pulse FARAD laboratory-version thruster. The design was based upon guidelines and performance scaling parameters presented in Refs. [4, 5]. In this paper, we expand upon the design presented in Ref. [3] by presenting a fully-assembled and operational FARAD laboratory-model thruster and addressing system and subsystem-integration issues (concerning mass injection, preionization, and acceleration) that arose during assembly. Experimental data quantifying the operation of this thruster, including detailed internal plasma measurements, are presented by the authors in a companion paper [6]. The thruster operates by first injecting neutral gas over the face of a flat, inductive acceleration coil and at some later time preionizing the gas. Once the gas is preionized current is passed through the acceleration coil, inducing a plasma current sheet in the propellant that is accelerated away from the coil through electromagnetic interaction with the time-varying magnetic field. Neutral gas is injected over the face of the acceleration coil through a fast-acting valve that feeds a central distribution manifold. The thruster is designed to preionize the gas using an RF-frequency ringing signal produced by a discharging Vector Inversion Generator (VIG). The acceleration stage consists of a multiple-turn, multiple-strand spiral induction coil (see Fig. 1, left panel) and is designed for operation at discharge energies on the order of 100 J/pulse. Several different pulsed power train modules can be used to drive current through the acceleration coil. One such power train is based upon the Bernardes and Merryman circuit topology, which restricts voltage reversal on the capacitor banks and can be clamped to eliminate current reversal in the coil. A second option is a pulse-compression-ring power train (see Fig. 1, right panel), which takesa temporally broad, low current pulse and transforms it into a short, high current pulse
Design of an Integrated-System FARAD Thruster
Pulsed inductive plasma accelerators are spacecraft propulsion devices in which energy is stored in a capacitor and then discharged through an inductive coil. The device is electrodeless, inducing a current s heet in a plasma located near the face of the coil. The propellant is accelerated and expelled at a high exhaust velocity (order of 10 km/s) through the interaction of the plasma current and the induced magne tic field, The Faraday Accelerator with RF-Assisted Discharge (FARAD) thruster is a type of pulsed inductive plasma accelerator in which t he plasma is preionized by a mechanism separate from that used to for m the current sheet and accelerate the gas. Employing a separate preionization mechanism allows for the formation of an inductive current s heet at much lower discharge energies and voltages than those used in previous pulsed inductive accelerators like the Pulsed Inductive Thr uster (PIT). In this paper, we present the design of a benchtop FARAD thruster with all the subsystems (mass injection, preionization, and acceleration) integrated into a single unit. Design of the thruster follows the guidelines and similarity performance parameters presented elsewhere. The system is designed to use the ringing, RF-frequency s ignal produced by a discharging Vector Inversion Generator (VIG) to p reionize the gas. The acceleration stage operates on the order of 100 J/pulse and can be driven by several different pulsed powertrains. These include a simple capacitor coupled to the system, a Bernardes and Merryman configuration, and a pulsecompression circuit that takes a temporally broad, low current pulse and transforms it into a short, h igh current pulse. A set of applied magnetic field coils are integrated into the system to guide the preionized propellant as it spreads ov er the face of the inductive acceleration coil. The coils are operate d in a pulsed mode, and the thruster can be operated without using the coils to determine if there is a performance improvement gain realiz ed when an applied field is present
A cohort study of post-weaning multisystemic wasting syndrome and PCV2 in 178 pigs from birth to 14 weeks on a single farm in England
Our hypothesis was that pigs that develop post-weaning multisystemic wasting syndrome (PMWS) are detectable from an early age with signs of weight loss and other clinical and serological abnormalities. Therefore, the objective of this study was to investigate the temporally varying and fixed events linked with the clinical incidence of PMWS by comparing affected and unaffected pigs in a cohort of 178 male piglets. Piglets were enrolled at birth and examined each week. Samples of blood were collected at regular intervals. The exposures measured were porcine circovirus type 2 (PCV2) antibody titres in all 178 and PCV2 antigen in a subset of 75 piglets. We also observed piglet health and measured their weight, and a post-mortem examination was performed by an external laboratory on all pigs between 6 and 14 weeks of age that died. From the cohort, 14 (8%) pigs died from PMWS and 4% from other causes. A further 37 pigs between 6 and 14 weeks of age died from PMWS (30) and ileitis and other causes (7). PMWS was only apparent in pigs from 1 to 2 weeks before death when they wasted rapidly. There were no other characteristic clinical signs and no obvious gross clinical lesions post-mortem. There was no strong link with PCV2 antibody throughout life but PCV2 antigen level was higher from 4 to 6 weeks of age in pigs that died from PMWS compared with pigs that died from other causes
General population normative data for the EORTC QLQ-C30 health-related quality of life questionnaire based on 15,386 persons across 13 European countries, Canada and the Unites States
Super-individuals a simple solution for modelling large populations on an individual basis
First-principles extrapolation method for accurate CO adsorption energies on metal surfaces
We show that a simple first-principles correction based on the difference
between the singlet-triplet CO excitation energy values obtained by DFT and
high-level quantum chemistry methods yields accurate CO adsorption properties
on a variety of metal surfaces.
We demonstrate a linear relationship between the CO adsorption energy and the
CO singlet-triplet splitting, similar to the linear dependence of CO adsorption
energy on the energy of the CO 2* orbital found recently {[Kresse {\em et
al.}, Physical Review B {\bf 68}, 073401 (2003)]}. Converged DFT calculations
underestimate the CO singlet-triplet excitation energy ,
whereas coupled-cluster and CI calculations reproduce the experimental . The dependence of on is used
to extrapolate for the top, bridge and hollow sites for the
(100) and (111) surfaces of Pt, Rh, Pd and Cu to the values that correspond to
the coupled-cluster and CI value. The correction
reproduces experimental adsorption site preference for all cases and obtains
in excellent agreement with experimental results.Comment: Table sent as table1.eps. 3 figure
Partial efficacy of a VSV-SIV/MVA-SIV vaccine regimen against oral SIV challenge in infant macaques
Despite antiretroviral medications, the rate of pediatric HIV-1 infections through breast-milk transmission has been staggering in developing countries. Therefore, the development of a vaccine to protect vulnerable infant populations should be actively pursued. We previously demonstrated that oral immunization of newborn macaques with vesicular stomatitis virus expressing simian immunodeficiency virus genes (VSV-SIV) followed 2 weeks later by an intramuscular boost with modified vaccinia ankara virus expressing SIV (MVA-SIV) successfully induced SIV-specific T and B cell responses in multiple lymphoid tissues, including the tonsil and intestine [13]. In the current study, we tested the oral VSV-SIV prime/systemic MVA-SIV boost vaccine for efficacy against multiple oral SIVmac251 challenges starting two weeks after the booster vaccination. The vaccine did not prevent SIV infection. However, in vaccinated infants, the level of SIV-specific plasma IgA (but not IgG) at the time of challenge was inversely correlated with peak viremia. In addition, the levels of SIV-specific IgA in saliva and plasma were inversely correlated with viral load at euthanasia. Animals with tonsils that contained higher frequencies of SIV-specific TNF-α- or IFN-γ-producing CD8+ T cells and central memory T cells at euthanasia also had lower viremia. Interestingly, a marked depletion of CD25+ FoxP3+ CD4+ T cells was observed in the tonsils as well as the intestine of these animals, implying that T regulatory cells may be a major target of SIV infection in infant macaques. Overall, the data suggest that, in infant macaques orally infected with SIV, the co-induction of local antiviral cytotoxic T cells and T regulatory cells that promote the development of IgA responses may result in better control of viral replication. Thus, future vaccination efforts should be directed towards induction of IgA and mucosal T cell responses to prevent or reduce virus replication in infants
Rationale and protocol for the 7- And 8-year longitudinal assessments of eye health in a cohort of young adults in the Raine Study
Introduction Eye diseases and visual impairment more commonly affect elderly adults, thus, the majority of ophthalmic cohort studies have focused on older adults. Cohort studies on the ocular health of younger adults, on the other hand, have been few. The Raine Study is a longitudinal study that has been following a cohort since their birth in 1989-1991. As part of the 20-year follow-up of the Raine Study, participants underwent a comprehensive eye examination. As part of the 27- and 28-year follow-ups, eye assessments are being conducted and the data collected will be compared with those of the 20-year follow-up. This will provide an estimate of population incidence and updated prevalence of ocular conditions such as myopia and keratoconus, as well as longitudinal change in ocular parameters in young Australian adults. Additionally, the data will allow exploration of the environmental, health and genetic factors underlying inter-subject differential long-term ocular changes.
Methods and analysis Participants are being contacted via telephone, email and/or social media and invited to participate in the eye examination. At the 27-year follow-up, participants completed a follow-up eye screening, which assessed visual acuity, autorefraction, ocular biometry and ocular sun exposure. Currently, at the 28-year follow-up, a comprehensive eye examination is being conducted which, in addition to all the eye tests performed at the 27-year follow-up visit, includes tonometry, optical coherence tomography, funduscopy and anterior segment topography, among others. Outcome measures include the incidence of refractive error and pterygium, an updated prevalence of these conditions, and the 8-year change in ocular parameters.
Ethics and dissemination The Raine Study is registered in the Australian New Zealand Clinical Trials Registry. The Gen2 20-year, 27-year and 28-year follow-ups are approved by the Human Research Ethics Committee of the University of Western Australia. Findings resulting from the study will be published in health or medical journals and presented at conferences.
Trial registration number ACTRN12617001599369; Active, not recruiting
Variation in the daily activity, movement and refugia of Critically Endangered geometric tortoises, Psammobates geometricus, in autumn and spring
To help assess habitat requirements of Critically Endangered geometric tortoises, we used thread-trailing to measure daily activity, movements and refugia of adult Psammobates geometricus in autumn and spring 2002. We found strong differences between seasons, and effects of weather, individuals and sex. The high activity was consistent with mild weather during autumn and spring. However, daily temperatures limited female movements on cool autumn days and male movements on warm spring days, a pattern consistent with sexual size dimorphism (large females and small males). The long movements in autumn probably helped tortoises find food plants that grow quickly after autumn rains; both sexes recover body condition from autumn lows, and females begin egg production in late-autumn and winter. These movements may also help males mate with females before they ovulate. The high activity of females in spring should help them forage and sustain their vitellogenesis, egg production and nesting in spring. Male paths tended to be more linear than female paths in both seasons, so this sexual difference is likely not linked to food consumption. Males may move long, linear paths to engage females and avoid other males. Males may have been thermally-challenged in spring. Their movements decreased with increased ground temperatures (in the sun), they used denser refugia in spring than in autumn, and in spring used denser refugia than females used. Geometric tortoises typically used different refugia on consecutive nights, a type of predator avoidance mechanism
Fitting the integrated Spectral Energy Distributions of Galaxies
Fitting the spectral energy distributions (SEDs) of galaxies is an almost
universally used technique that has matured significantly in the last decade.
Model predictions and fitting procedures have improved significantly over this
time, attempting to keep up with the vastly increased volume and quality of
available data. We review here the field of SED fitting, describing the
modelling of ultraviolet to infrared galaxy SEDs, the creation of
multiwavelength data sets, and the methods used to fit model SEDs to observed
galaxy data sets. We touch upon the achievements and challenges in the major
ingredients of SED fitting, with a special emphasis on describing the interplay
between the quality of the available data, the quality of the available models,
and the best fitting technique to use in order to obtain a realistic
measurement as well as realistic uncertainties. We conclude that SED fitting
can be used effectively to derive a range of physical properties of galaxies,
such as redshift, stellar masses, star formation rates, dust masses, and
metallicities, with care taken not to over-interpret the available data. Yet
there still exist many issues such as estimating the age of the oldest stars in
a galaxy, finer details ofdust properties and dust-star geometry, and the
influences of poorly understood, luminous stellar types and phases. The
challenge for the coming years will be to improve both the models and the
observational data sets to resolve these uncertainties. The present review will
be made available on an interactive, moderated web page (sedfitting.org), where
the community can access and change the text. The intention is to expand the
text and keep it up to date over the coming years.Comment: 54 pages, 26 figures, Accepted for publication in Astrophysics &
Space Scienc
- …