Power supply noise reduction in 90 nm using active decap

On-chip supply voltage fluctuations are known to adversely affect performance parameters of VLSI circuits. These power supply fluctuations reduce drive capability, causes reliability issues, decrease noise margin and also adversely affect timing. Technology scaling further aggravates the problem as IR and Ldi/dt noise sources increase with each device generation. Current method used to reduce power supply variations uses an on-chip decoupling capacitors (decaps). These MOS capacitors utilize significant die area with about 15%-20% common for high-end microprocessors [4]. They also consume a considerable amount of power due to leakage and are prone to oxide breakdown during an ESD event because of reduced oxide thickness, making MOS capacitors unsuitable for technologies 90 nm and below. To improve the effectiveness of decap and reduce decap’s area, a new active decap design is proposed for 90 nm technology

Vapor-Liquid-Solid Growth of Semiconductor SiC Nanowires for Electronics applications

While investigations of semiconductor nanowires (NWs) has a long history, a significant progress is yet to be made in silicon carbide (SiC) NW technologies before they are ready to be utilized in electronic applications. In this dissertation work, SiC NW polytype control, NW axis orientation with respect to the growth substrate and other issues of potential technological importance are investigated. A new method for growing SiC NWs by vapor-liquid-solid mechanism was developed. The method is based on an in-situ vapor phase delivery of a metal catalyst to the growth surface during chemical vapor deposition. This approach is an alternative to the existing seeded catalyst method based on ex-situ catalyst deposition on the target substrate. The new SiC NW growth method provided an improved control of the NW density. It was established that the NW density is influenced by the distance from the catalyst source to the substrate and is affected by both the gas flow rate and the catalyst diffusion in the gas phase. An important convenience of the new method is that it yields NW growth on the horizontal substrate surfaces as well as on titled and vertical sidewalls of 4H-SiC mesas. This feature facilitates investigation of the NW growth trends on SiC substrate surfaces having different crystallographic orientations simultaneously, which is very promising for future NW device applications. It was established that only certain orientations of the NW axes were allowed when growing on a SiC substrate. The allowed orientations of NWs of a particular polytype were determined by the crystallographic orientation of the substrate. This substrate-dependent (i.e., epitaxial) growth resulted in growth of 3C-SiC NWs in total six allowed crystallographic orientations with respect to the 4H-SiC substrate. This NW axis alignment offers an opportunity to achieve a limited number of NW axis directions depending on the surface orientation of the substrate. The ease of controlling the NW density enabled by the vapor-phase catalyst delivery approach developed in this work, combined with the newly obtained knowledge about how to grow unidirectional (wellaligned) NW arrays, offer new opportunities for developing novel SiC NW electronic and photonic devices

Rotational panoramic radiographs-unusual triple images

Currently clinicians advice rotational panoramic radiography (RPR) for preliminary investigation. Despite few inherent limitations, rotational panoramic radiography still remains the diagnostic tool of choice. Abnormal structures such as a supernumerary tooth or a device falling within the certain central regions in conventional RPR images may mislead the clinicians towards an inaccurate diagnosis by producing multiple ghost images. Such cases must be treated with circumspect, and apart from RPR, additional imaging modalities need be employed to provide a judicious interpretation of the clinical situation. Thus this manuscript, we present a case where a paramedian supernumerary tooth which exhibited double ghost images on a conventional RPR. This prompted us to elicit the use of a CBCT and 3 dimensional images to determine the true nature of the problem. We outline the working of the diamond principle behind a conventional RPR which cause the appearance of multiple ghost images. The discerning clinician must be cognizant of the possible positional and analytical errors which may be prevalent in a conventional RPR when viewing structures lying in the palatal region, specifically in the midline while making diagnosis

Physiochemical changes during different stages of fruit ripening of climacteric fruit of mango (Mangifera indica L.) and non-climacteric of fruit cashew apple (Anacardium occidentale L.)

The present investigation was made to study the ripening behavior of climacteric fruit of mango (Mangifera indica L.)  and a non–climacteric fruit of  cashew apple (Anacardium occidentale L.) The different stages of fruit namely immature, mature, quarter ripen, half ripen, full ripen and over ripen were used for various analyses with pericarp tissues of mango and cashew apple fruits. Physio–Chemical parameters such as fruit firmness, total soluble solids, titratable acidity and pH. The fruit firmness and titratable acidity high at immature stage and low in over ripen stage. On the other hand, Total Soluble Solids and PH low at immature stage and high in over ripen stage

Studie vlivu teploty nasávaného vzduchu na účinnost spalovací turbíny

The main objective of this project is to study of the influence of intake air temperature on the efficiency of the SR-30 microturbine learning model. Also, process a correlation analysis of the device’s efficiency on the intake air temperature. The current study investigated combustion turbine efficiency by calculating intake air at different temperature. This project described the working process of SR-30 microturbine and performance characteristics analysis of intake air temperature.Hlavním cílem tohoto projektu je studium vlivu teploty nasávaného vzduchu na účinnost modelu učení mikroturbíny SR-30. Také proveďte korelační analýzu účinnosti zařízení s teplotou nasávaného vzduchu. Současná studie zkoumala účinnost spalovací turbíny výpočtem nasávaného vzduchu při různé teplotě. Tento projekt popsal pracovní proces mikroturbíny SR-30 a analýzu výkonových charakteristik teploty nasávaného vzduchu.361 - Katedra energetikydobř

Using smartphone video “selfies” to monitor change in toothbrushing behavior after a brief intervention: A pilot study

Background: Attempts to refine toothbrushing (TB) technique, an ingrained habit in adults, can meet with some challenges. Recently, the role of proactive interference as a barrier to improving the learning of proper brushing has been proposed. This pilot feasibility study was designed to investigate TB behavior and to see how it changes after training. Smartphone video “selfies” (SPVSs) are increasingly being used in the medical field to assess, monitor, and determine the progression of diseases. Materials and Methods: We used SPVS to study TB skills in a small sample of volunteers. Over a period of 14 days, after a one-time group training session, we observed TB behavior of volunteers using self-captured SPVS. Results: Following the brief intervention, we observed an 8% of improvement in TB skills. Discussion: To the best of our knowledge, this is the first report using SPVS to study TB behavior. We demonstrated initial feasibility of using SPVS in the dental setting. We observed modest improvements in toothbrushing accuracy and quality, and we generated important experiences about the use of Selfies for TB monitoring and intervention, and some interesting insights about where in the toothbrushing is more or less effective. Conclusion: Further investigation using a larger sample size is needed to thoroughly assess the effectiveness of this approach to improve TB skills and better understand the role of proactive interference