The journey of Zika to the developing brain

Zika virus is a mosquito-borne Flavivirus originally isolated from humans in 1952. Following its re-emergence in Brazil in 2015, an increase in the number of babies born with microcephaly to infected mothers was observed. Microcephaly is a neurodevelopmental disorder, characterised phenotypically by a smaller than average head size, and is usually developed in utero. The 2015 outbreak in the Americas led to the World Health Organisation declaring Zika a Public Health Emergency of International Concern. Since then, much research into the effects of Zika has been carried out. Studies have investigated the structure of the virus, its effects on and evasion of the immune response, cellular entry including target receptors, its transmission from infected mother to foetus and its cellular targets. This review discusses current knowledge and novel research into these areas, in hope of developing a further understanding of how exposure of pregnant women to the Zika virus can lead to impaired brain development of their foetus. Although no longer considered an epidemic in the Americas, the mechanism by which Zika acts is still not comprehensively and wholly understood, and this understanding will be crucial in developing effective vaccines and treatments

Effect of parent concrete on the performance of recycled aggregate concrete

Recycling concrete construction waste is a promising way towards sustainable construction. Indeed, replacing natural aggregates with recycled aggregates obtained from concrete waste lowers the environmental impact of concrete constructions and improves natural resource conservation. This paper reports on an experimental study on mechanical and durability properties of concretes casted with recycled aggregates obtained from two different parent concretes, belonging to two structural elements of the old Cagliari stadium. The effects of parent concretes on coarse recycled aggregates and on new structural concretes produced with different replacement percentages of these recycled aggregates are investigated. Mechanical properties (compressive strength, modulus of elasticity, and splitting tensile strength) and durability properties (water absorption, freeze thaw, and chloride penetration resistance) are experimentally evaluated and analyzed as fundamental features to assess structural concrete behavior. The results show that the mechanical performance of recycled concrete is not related to the parent concrete characteristics. Furthermore, the resistance to pressured water penetration is not reduced by the presence of recycled aggregates, and instead, it happens for the chloride penetration resistance. The resistance to frost–thawing seems not related to the recycled aggregates replacement percentage, while an influence of the parent concrete has been assessed

Universal field matching in craniospinal irradiation by a background-dose gradient-optimized method

Purpose: The gradient-optimized methods are overcoming the traditional feathering methods to plan field junctions in craniospinal irradiation. In this note, a new gradient-optimized technique, based on the use of a background dose, is described. Methods: Treatment planning was performed by RayStation (RaySearch Laboratories, Stockholm, Sweden) on the CT scans of a pediatric patient. Both proton (by pencil beam scanning) and photon (by volumetric modulated arc therapy) treatments were planned with three isocenters. An 'in silico' ideal background dose was created first to cover the upper-spinal target and to produce a perfect dose gradient along the upper and lower junction regions. Using it as background, the cranial and the lower-spinal beams were planned by inverse optimization to obtain dose coverage of their relevant targets and of the junction volumes. Finally, the upper-spinal beam was inversely planned after removal of the background dose and with the previously optimized beams switched on. Results: In both proton and photon plans, the optimized cranial and the lower-spinal beams produced a perfect linear gradient in the junction regions, complementary to that produced by the optimized upper-spinal beam. The final dose distributions showed a homogeneous coverage of the targets. Discussion: Our simple technique allowed to obtain high-quality gradients in the junction region. Such technique universally works for photons as well as protons and could be applicable to the TPSs that allow to manage a background dose

Fast falling weight deflectometer method for condition assessment of rc bridges

In this paper, the use of Fast Falling Weight Deflectometer (Fast-FWD) is analyzed as a non-destructive and quick test procedure to evaluate the efficiency of short-span bridges. The FastFWD is an instrument that can produce a broadband dynamic force up to an impact value of 120 KN: The impact is constant and replicable, providing accurate action measures of bridge stiffness in a truly short period (30 ms). In this paper, a single-span reinforced concrete bridge is investigated, using the Fast-FWD. The considered bridge, approximately 12.0 m long and 15.5 m wide, was in critical condition. The bridge is in a suburban principal road near to the City of Cagliari in Sardinia (Italy), with an Annual Average Daily Traffic of 13,500 vehicles/day, and was suddenly closed, creating serious problems for urban mobility. In these conditions, the investigation through other standard techniques is time-consuming and labor intensive. For this reason, it is important to introduce methods that can be rapid, accurate and cost-efficient. In this paper, bridge stiffness values obtained during the in situ experimental campaign were compared with finite element models values. The Fast-FWD has the potential to provide engineering information that can help us to better understand bridge condition, in a rapid and cost-effective procedure

Ex-LDH-based catalysts for CO2 conversion to methanol and dimethyl ether

CO2-derived methanol and dimethyl ether can play a very important role as fuels, energy carriers, and bulk chemicals. Methanol production from CO2 and renewable hydrogen is considered to be one of the most promising pathways to alleviate global warming. In turn, methanol could be subsequently dehydrated into DME; alternatively, one-step CO2 conversion to DME can be obtained by hydrogenation on bifunctional catalysts. In this light, four oxide catalysts with the same Cu and Zn content (Cu/Zn molar ratio = 2) were synthesized by calcining the corresponding CuZnAl LDH systems modified with Zr and/or Ce. The fresh ex-LDH catalysts were characterized in terms of composition, texture, structure, surface acidity and basicity, and reducibility. Structural and acid– base properties were also studied on H2-treated samples, on which specific metal surface area and dispersion of metallic Cu were determined as well. After in situ H2 treatment, the ex-LDH systems were tested as catalysts for the hydrogenation of CO2 to methanol at 250 °C and 3.0 MPa. In the same experimental conditions, CO2 conversion into dimethyl ether was studied on bifunctional catalysts obtained by physically mixing the ex-LDH hydrogenation catalysts with acid ferrierite or ZSM-5 zeolites. For both processes, the effect of the Al/Zr/Ce ratio on the products distribution was investigated

On the role of the nature and density of acid sites on mesostructured aluminosilicates dehydration catalysts for dimethyl ether production from CO2

In this work, we designed four different mesostructured acidic materials to be used as methanol dehydration catalysts for the one-pot CO2-to-DME process, in the form of physical mixtures with a Cu/ZnO/Al2O3-based commercial redox catalyst (CZA). The studied systems consist in a mesostructured gamma-Al2O3 and three mesostructured aluminosilicates (namely Al-MCM-41, Al-SBA-15, and Al-SBA-16) with the same Si/Al ratio (= 15) but significantly different textural properties. The main goal of this work is to understand how the textural features can influence the acidic properties (typology, amount, strength, surface density) and, consequently, how catalytic performances can be correlated with acidic features. On this note, we found that the systems presenting both Bronsted and Lewis sites (namely the three aluminosilicates) show much better catalytic performances than gamma-Al2O3, that only features Lewis sites, thus implying that Bronsted sites are more active towards methanol dehydration than Lewis sites. The three aluminosilicates, despite presenting comparable amounts of Bronsted sites, show significantly different performances in terms of selectivity to DME; particularly, Al-SBA-16, the system with the lowest surface area, proved to be the most efficient catalyst. This finding led us to infer that, besides Bronsted acidity, a high surface density of acid sites is a key factor to obtain a high dehydration activity; being methanol dehydration a bi-molecular reaction, the close proximity of two acid sites would indeed favor the kinetics of the process

Fenton-type bimetallic catalysts for degradation of dyes in aqueous solutions

Dye compounds are becoming a problematic class of pollutants for the environment, so it is important to develop stable catalysts for their elimination. First, several studies were performed with different Y zeolites (NaY, (NH4)Y and USY) in order to select the best support for the preparation of the bimetallic catalysts. In particular, NaY zeolite was used as the support for Fe, Cu and Mn metals to prepare mono and bimetallic Fenton-type catalysts by the ion exchange method. The catalysts were characterized by several techniques, such as chemical analysis, nitrogen physisorption, X-ray diffraction (XRD), scanning electron microscopy (SEM) and cyclic voltammetry studies. Characterization results revealed that the metals were successfully ion-exchanged within the NaY zeolite. The prepared catalysts were tested for the aqueous-phase degradation of dye compounds (Procion yellow (PY) and Tartrazine (Tar)) at atmospheric pressure and different temperatures, using H2O2 as the oxidant. All the investigated samples were found to be active in degrading the dyes through the Fenton-type process; however, the oxidation rate was found to be higher in the presence of the bimetallic catalysts. CuFe-NaY displays the best mineralization rate for PY oxidation while MnFe-NaY shows the highest activity for Tar degradation. This work may provide further insight into the design of Fenton-type bimetallic catalysts with improved catalytic properties for environmental remediation.This research work has been developed under the scope of the projects: BioTecNorte (operation NORTE-01-0145-FEDER-000004), supported by the Northern Portugal Regional Operational Programme (NORTE 2020), under the Portugal 2020 Partnership Agreement, through the European Regional Development Fund (ERDF). This work also has been funded by national funds (Fundação para Ciência e Tecnologia, FCT), through the projects: PTDC/AAGTEC/5269/2014, Centre of Chemistry (UID/QUI/00686/2013 and UID/QUI/0686/2016) and Associate Laboratory LSRE-LCM-UIDB/50020/2020. OSGPS acknowledges FCT funding under the Scientific Employment Stimulus—Institutional Call CEECINST/00049/2018.info:eu-repo/semantics/publishedVersio

Harnessing Wharton's jelly stem cell differentiation into bone-like nodule on calcium phosphate substrate without osteoinductive factors.

An important aim of bone regenerative medicine is to design biomaterials with controlled chemical and topographical features to guide stem cell fate towards osteoblasts without addition of specific osteogenic factors. Herein, we find that sprayed bioactive and biocompatible calcium phosphate substrates (CaP) with controlled topography induce, in a well-orchestrated manner, Wharton's jelly stem cells (WJ-SCs) differentiation into osteoblastic lineage without any osteogenic supplements. The resulting WJ-SCs commitment exhibits features of native bone, through the formation of three-dimensional bone-like nodule with osteocyte-like cells embedded into a mineralized type I collagen. To our knowledge, these results present the first observation of a whole differentiation process from stem cell to osteocytes-like on a synthetic material. This suggests a great potential of sprayed CaP and WJ-SCs in bone tissue engineering. These unique features may facilitate the transition from bench to bedside and the development of successful engineered bone.Designing materials to direct stem cell fate has a relevant impact on stem cell biology and provides insights facilitating their clinical application in regenerative medicine. Inspired by natural bone compositions, a friendly automated spray-assisted system was used to build calcium phosphate substrate (CaP). Sprayed biomimetic solutions using mild conditions led to the formation of CaP with controlled physical properties, good bioactivity and biocompatibility. Herein, we show that via optimization of physical properties, CaP substrate induce osteogenic differentiation of Wharton's jelly stem cells (WJ-SCs) without adding osteogenic supplement factors. These results suggest a great potential of sprayed CaP and WJ-SCs in bone tissue engineering and may facilitate the transition from bench to beside and the development of clinically successful engineered bone.journal articleresearch support, non-u.s. gov't2017 022016 11 22importe

Degradation of pollutants in water by Fenton-like oxidation over LaFe-catalysts: Optimization by experimental design

The effect of different parameters such as temperature, type of catalyst and hydrogen peroxide (H2O2) concentration on the degradation of pollutants in water by Fenton-like oxidation was studied by using the Box-Behnken design (BBD), an effective statistical model to design the experiments. Concerning the heterogeneous catalysts, three bimetallic catalysts with lanthanum (La) and iron (Fe) ion-exchanged into zeolites (NaY and ZSM5) and a natural clay from Morocco were prepared and used for Fenton-like oxidation of organic pollutants in water. Tartrazine (Tar, a food coloring compound known as E102) and caffeine (Caf, a stimulant drug present in popular beverages such as coffee and tea) were selected as pollutants due to their presence in several commercial products for daily consumption. The BBD model indicated that the optimum catalytic conditions for Fenton-like reaction with an initial pollutant concentration of 30ppm at pH 3.0 were T=40°C and 90mM of H2O2. The maximum conversion values achieved with the best catalyst, LaFeZSM5, were 96.6% for Tar after 180min and 51.0% for Caf after 300min of reaction. To increase the conversion of Caf, a modified zeolite electrode was used for electro Fenton-like oxidation without H2O2, at room temperature.O.A. thanks to ERASMUS + Program for the mobility Ph.D. grant and O.B. thanks to Fundação para Ciência e Tecnologia, Portugal (FCT) for his Ph.D. grant (SFRH/BD/140362/2018).This research work has been funded by national funds funded through FCT/MCTES (PIDDAC) over the projects: LA/P/0045/2020 (ALiCE), UIDB/50020/2020 and UIDP/50020/2020 (LSRE-LCM), UIDB/04469/2020 (CEB) and by LA/P/0029/2020 (LABBELS), Centre of Chemistry (UID/QUI/0686/2020) and project BioTecNorte (operation NORTE-01-0145-FEDER-000004), supported by the Northern Portugal Regional Operational Programme (NORTE 2020), under the Portugal 2020 Partnership Agreement, through the European Regional Development Fund (ERDF).info:eu-repo/semantics/publishedVersio

Toxicity and Clinical Results after Proton Therapy for Pediatric Medulloblastoma: A Multi-Centric Retrospective Study

Medulloblastoma is the most common malignant brain tumor in children. Even if current treatment dramatically improves the prognosis, survivors often develop long-term treatment-related sequelae. The current radiotherapy standard for medulloblastoma is craniospinal irradiation with a boost to the primary tumor site and to any metastatic sites. Proton therapy (PT) has similar efficacy compared to traditional photon-based radiotherapy but might achieve lower toxicity rates. We report on our multi-centric experience with 43 children with medulloblastoma (median age at diagnosis 8.7 years, IQR 6.6, M/F 23/20; 26 high-risk, 14 standard-risk, 3 ex-infant), who received active scanning PT between 2015 and 2021, with a focus on PT-related acute-subacute toxicity, as well as some preliminary data on late toxicity. Most acute toxicities were mild and manageable with supportive therapy. Hematological toxicity was limited, even among HR patients who underwent hematopoietic stem-cell transplantation before PT. Preliminary data on late sequelae were also encouraging, although a longer follow-up is needed