Colapso del sistema de salud por crisis humanitaria en Venezuela

El siguiente articulo examina la creciente problemática del colapso del sistema de salud gracias a la crisis migratoria de personas venezolanas que se extiende por todo el país y expone con detalle cada una de situaciones de que se están presentando en Colombia como consecuencia de dicha crisis, de la misma forma pretende analizar la posición del Estado describiendo cada una de las soluciones que propone como respuesta a la crisis humanitaria

Wine routes in Spain: A case study

Spain is a country with an enormous wine-growing tradition and with a huge tourist industry, although it has not made the importance of wine tourism profitable. Thus, it was not until 2000 that different official wine routes seemed to appear, with the main objective, amongst others, being to help develop rural areas where wine production is of crucial importance and to offer alternatives to traditional sun and beach tourism. In this paper, we will present an analysis of wine tourism in Spain based on the premise that wine (and regional cuisine) may be, and very frequently is, the main reason for visiting a certain area. To investigate this, we will present the results of an empirical study carried out in one of the official wine routes of Andalusia, a Spanish region where sun and beach tourism and cultural tourism represent a highly significant part of tourist activity. We have analysed how this tourist route is bringing about significant socioeconomic changes to the geographical area. To achieve this aim, we have conducted a survey of the companies involved in the wine route in order to ascertain their opinions on the impact and influence of the route. The main results of the study demonstrate the need to consolidate the development of such routes through collaboration between public institutions, ensuring the participation of all the different social actors involved

New Perspectives for Electrodialytic Remediation

Electrodialytic remediation has been widely used for the recovery of different contaminants from numerous matrices, such as, for example, polluted soils, wastewater sludge, fly ash, mine tailing or harbour sediments. The electrodialytic remediation is an enhancement of the electrokinetic remediation technique, and it consists of the use of ion-exchange membranes for the control of the acid and the alkaline fronts generated in the electrochemical processes. While the standard electrodialytic cell is usually built with three-compartment configuration, it has been shown that for the remediation of matrices that require acid environment, a two-compartment cell has given satisfactory removal efficiencies with reduced energy costs. Recycling secondary batteries, with growing demand, has an increasing economic and environmental interest. This work focusses on the proposal of the electrodialytic remediation technique as a possible application for the recycling of lithium-ion cells and other secondary batteries. The recovery of valuable components, such as lithium, manganese, cobalt of phosphorous, based on current recycling processes and the characterization of solid waste is addressed.This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 778045. Paz-Garcia acknowledges the financial support from the University of Malaga, project: PPIT.UMA.B5.2018/17. Villen-Guzman acknowledges the funding from the University of Malaga for the postdoctoral fellowship PPIT.UMA.A.3.2.2018. Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tec

Electrodialytic Recovery of Cobalt from Spent Lithium-Ion Batteries

Contribución en congreso científicoRecycling lithium-ion batteries has an increasing interest for economic and environmental reasons. Disposal of lithium-ion batteries imposes high risk to the environment due to the toxicity of some of their essential components. In addition to this, some of these components, such as cobalt, natural graphite and phosphorus, are included in the list of critical raw materials for the European Union due to their strategic importance in the manufacturing industry. Therefore, in the recent years, numerous research studies have been focused on the development of efficient processes for battery recycling and the selective recuperation of these key components. LiCoO2 is the most common material use in current lithium-ion batteries cathodes. In the current work, an electrodialytic method is proposed for the recovery of cobalt from this kind of electrode. In a standard electrodialytic cell, the treated matrix is separated from the anode and the cathode compartments by means of ion-exchange membranes. A cation-exchange membrane (CEM) allows the passage of cations and hinders the passage of anions, while the behaviour of anion-exchange membrane (AEM) does the opposite. A three-compartment electrodialytic cell has been designed and assembled, as depicted in the figure. In the central compartment, a suspension of LiCoO2 is added. Different extracting agents, such as EDTA, HCl and HNO3, are tested to enhanced the dissolution and the selective extraction of the target metal. Dissolved cobalt-containing complexes migrate towards the cathode or the anode compartments depending on the ionic charge of the complexes. While cobalt extraction via extracting agents is an expensive treatment, as it requires the constant addition of chemicals, an efficient electrodialytic cell could allow the recirculation of the extracting agents and the economical optimization of the process.This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 778045. Paz-Garcia acknowledges the financial support from the University of Malaga, project: PPIT.UMA.B5.2018/17. Villen-Guzman acknowledges the funding from the University of Malaga for the postdoctoral fellowship PPIT.UMA.A.3.2.2018. Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tec

Effectiveness of conventional drinking water treatment in the removal of polycyclic aromatic hydrocarbons

The presence of recalcitrant organic pollutants, such as polycyclic aromatic hydrocarbons (PAHs) in aquatic environments poses a threat to the human health. According to recent studies, PAHs, such as benz[a]anthracene and phenanthrene, has been found in untreated drinking water. Hence, the removal of these contaminants through conventional treatment processes should be carefully evaluated. In this work, levels of selected PAHs in drinking water have been monitored during conventional treatment processes. The simulation of a full-scale Potable Water Treatment Plant (PWTP) located in the south of Spain was carried out using jar tests, a widely accepted tool in water treatment. The quantification of PAH concentration in drinking waterwas carried out using gas chromatography coupled with mass spectrometry.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Removal of polycyclic aromatic hydrocarbons (PAHs) in conventional drinking water treatment processes

Authors acknowledge the Central Laboratory of EMASA for the facilities provided to carry out the research. M. Villen-Guzman acknowledges the postdoctoral fellowship obtained from Universidad de Malaga, Spain. Funding for open access charge: Universidad de Malaga / CBUA, Spain.The presence of polycyclic aromatic hydrocarbons (PAHs) in water poses a serious threat to the human health due to their toxic effects. Therefore, the removal of these compounds from drinking water in Potable Water Treatment Plants (PWTPs) should be evaluated and optimized to assure the quality of water intended for human consumption. In this work, changes in PAHs levels during drinking water treatment processes have been monitored to evaluate the effectiveness of conventional processes in the removal of these recalcitrant pollutants. Several chemical treatment methods based on the addition of KMnO4, FeCl3 and NaClO were evaluated through jar tests. The analysis of PAH content of aqueous samples was carried out by gas chromatography coupled with mass spectrometry. The highest removal efficiency, over 90%, was obtained for benzo(a)anthracene, benzo(a) pyrene and dibenzo(a,h)anthracene. The most recalcitrant compounds to degradation were fluorene, anthracene, phenanthrene and flouranthene with reduction rates between 45 and 57%. The conventional treatment processes assessed have been proved to be effective reducing the PAH below the legal limits of drinking water quality. The definition of a parameter based on chemical properties of PAHs, i.e., sorption capacity and energy required to remove an electron, enabled the prediction of removal rate of pollutants which represents a valuable information for the plant operation.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Technical analysis of CO2 capture pathways and technologies

The reduction of CO2 emissions to minimize the impact of the climate change has become a global priority. The continuous implementation of renewable energy sources increases energy efficiency, while the reduction of CO2 emissions opens new options for carbon capture technologies to reduce greenhouse gases emissions. The combination of carbon capture with renewable energy balancing production offers excellent potential for fuels and chemical products and can play an essential role in the future energy system. This paper includes a critical review of the state of the art of different CO2 capture engineering pathways and technologies including a techno-economics analysis and focusing on comparing these technologies depending on the final CO2 application. The current cost for CO2 capture is in the range of 60–110 USD/t, likely to halve by 2030. This review offers technical information to select the most appropriate technology to be used in specific processes and for the different carbon capture pathways, i.e., Pre-combustion, Post-Combustion and Direct Air Capture. This comparison includes the CO2 capture approach for biomethane production by biogas upgrading to substitute fossil natural gas and other alternatives fuels production routes which will be introduces in future works performed by this review authors.Funding for open access charge: Universidad de Málaga / CBUA

The p75NTR-interacting protein SC1 inhibits cell cycle progression by transcriptional repression of cyclin E

Schwann cell factor 1 (SC1), a p75 neurotrophin receptor–interacting protein, is a member of the positive regulatory/suppressor of variegation, enhancer of zeste, trithorax (PR/SET) domain-containing zinc finger protein family, and it has been shown to be regulated by serum and neurotrophins. SC1 shows a differential cytoplasmic and nuclear distribution, and its presence in the nucleus correlates strongly with the absence of bromodeoxyuridine (BrdU) in these nuclei. Here, we investigated potential transcriptional activities of SC1 and analyzed the function of its various domains. We show that SC1 acts as a transcriptional repressor when it is tethered to Gal4 DNA-binding domain. The repressive activity requires a trichostatin A–sensitive histone deacetylase (HDAC) activity, and SC1 is found in a complex with HDACs 1, 2, and 3. Transcriptional repression exerted by SC1 requires the presence of its zinc finger domains and the PR domain. Additionally, these two domains are involved in the efficient block of BrdU incorporation by SC1. The zinc finger domains are also necessary to direct SC1's nuclear localization. Lastly, SC1 represses the promoter of a promitotic gene, cyclin E, suggesting a mechanism for how growth arrest is regulated by SC1

Acid leaching of LiCoO2 enhanced by reducing agent. Model formulation and validation.

In this work, a model has been formulated to describe the complex process of LiCoO2 leaching through the participation of competing reactions in acid media including the effect of H2O2 as reducing agent. The model presented here describes the extraction of Li and Co in the presence and absence of H2O2, and it takes into account the different phenomena affecting the controlling mechanisms. In this context, the model predicts the swift from kinetic control to diffusion control. The model has been implemented and solved to simulate the leaching process. To validate the model and to estimate the model parameters, a set of 12 (in triplicate) extraction experiments were carried out varying the concentration of hydrochloric acid (within the range of 0.5–2.5 M) and hydrogen peroxide (range 0–0.6%v/v). The simulation results match fairly well with the experimental data for a wide range of conditions. Furthermore, the model can be used to predict results with different solid-liquid ratios as well as different acid and oxygen peroxide concentrations. This model could be used to design or optimize a LiCoO2 extraction process facilitating the corresponding economical balance of the treatment.This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska- Curie grant agreement No. 778045 and the “Proyectos I+D+i en el marco del Programa Operativo FEDER Andalucía 2014–2020”, Project no. UMA18-FEDERJA-279. Cerrillo-Gonzalez acknowledges the FPU grant (FPU18/04295) obtained from the Spanish Ministry of Education. Funding for open access charge: Universidad de Málaga / CBUA

Alternative reducing agents for Lithium-Ion batteries recycling via hydrometallurgical process

Lithium-ion batteries (LIB) are a key factor in the transition to a decarbonised and clean energy system due to their application in the power sector and electric transport. However, a growing demand of these batteries involves two direct problems: an increase in the generation of spent LIBs as well as in the demand of raw materials. Hence, the development of efficient recycling treatment of LIBs is crucial to make them a true enabler of the green transition. Currently, the LIBs recycling process can be divided into pyrometallurgical and hydrometallurgical. The first one is based on the treatment of LIBs at high temperatures to produces metal pyrolysis and metal reduction, while the second method consists in the recovery of metals via acidic leaching. Although pyrometallurgical method is the most used in the industry, hydrometallurgical process presents a series of advantages, such as low energy consumption, high metal recovery and high product purity, that make it more promising in the search of more effective recycling method. In the hydrometallurgical process, the addition of acids and reducing agents is required to dissolve the solid particles and extract the valuable metals. The purpose of this work was to evaluate the effect of alternative reducing agent in the leaching process to maximize the amount of metal (Mn, Li, Ni, Co) recovered from a real LIBs waste. With this aim, the leaching processes were carried out using as reducing agent H2O2, Fe and NH4Cl. According to the experimental results, Fe and NH4Cl enhance the extraction yield as well as the reaction time comparing with the results obtain using H2O2.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech