A 64-channel inductively-powered neural recording sensor array

This paper reports a 64-channel inductively powered neural recording sensor array. Neural signals are acquired, filtered, digitized and compressed in the channels. Additionally, each channel implements a local auto-calibration mechanism which configures the transfer characteristics of the recording site. The system has two operation modes; in one case the information captured by the channels is sent as uncompressed raw data; in the other, feature vectors extracted from the detected neural spikes are transmitted. Data streams coming from the channels are serialized by an embedded digital processor and transferred to the outside by means of the same inductive link used for powering the system. Simulation results show that the power consumption of the complete system is 377μW.Ministerio de Ciencia e Innovación TEC2009-0844

A power efficient neural spike recording channel with data bandwidth reduction

This paper presents a mixed-signal neural spike recording channel which features, as an added value, a simple and low-power data compression mechanism. The channel uses a band-limited differential low noise amplifier and a binary search data converter, together with other digital and analog blocks for control, programming and spike characterization. The channel offers a self-calibration operation mode and it can be configured both for signal tracking (to raw digitize the acquired neural waveform) and feature extraction (to build a first-order PWL approximation of the spikes). The prototype has been fabricated in a standard CMOS 0.13μm and occupies 400μm×400μm. The overall power consumption of the channel during signal tracking is 2.8μW and increases to 3.0μW average when the feature extraction operation mode is programmed.Ministerio de Ciencia e Innovación TEC2009-08447Junta de Andalucía TIC-0281

Validación de la versión española del Cuestionario Breve de Evitación Experiencial (BEAQ) en población clínica

The Brief Experiential Avoidance Questionnaire (BEAQ) has been suggested as the most appropriate instrument for measuring experiential avoidance. However, no Spanish validation has been published. The aim of this study was to validate a Spanish version of the BEAQ in a clinical sample treated at a community mental health unit. Methods: Participants (N = 332) completed the BEAQ as well as other self-report measures of experiential avoidance and psychopathology. Results: Internal consistency was satisfactory (α = .82). No statistically significant gender differences were found in the BEAQ scores. The data also showed high test-retest reliability after four to six weeks, acceptable concurrent validity with another experiential avoidance measure and acceptable convergent validity with the psychopathology measure. The principal component analysis, forcing the one factor solution proposed in the original scale, produced indicators similar to the English version of the BEAQ. Conclusions: These results firmly support the reliability and validity of this Spanish validation, stressing its usefulness as a measure of experiential avoidance in clinical populations.Antecedentes: el Cuestionario Breve de Evitación Experiencial (BEAQ) ha sido propuesto como el instrumento más adecuado para medir la evitación experiencial. Sin embargo, todavía no ha sido publicada ninguna validación en español. Por lo tanto, el objetivo del presente estudio ha sido la validación de una versión española del BEAQ, en una muestra clínica atendida en un Centro de Salud Mental Comunitario. Método: los participantes (N = 332) completaron el BEAQ, así como otras medidas de autoinforme de evitación experiencial y psicopatología. Resultados: la consistencia interna fue satisfactoria (α = .82). No se encontraron diferencias de género estadísticamente significativas en las puntuaciones del BEAQ. Los datos también mostraron una alta fiabilidad test-retest en un intervalo de cuatro a seis semanas, validez concurrente aceptable con otra medida de evitación experiencial y validez convergente aceptable con la medida de psicopatología. El análisis de componentes principales forzando a la solución de un factor, como se propuso en la escala original, obtuvo unos indicadores similares a los obtenidos en dicha versión inglesa. Conclusiones: los resultados confirman la adecuada fiabilidad y validez de la presente versión española del BEAQ, destacando su utilidad como medida de la evitación experiencial en población clínica

A mixed-signal integrated circuit for FM-DCSK modulation

This paper presents a mixed-signal application-specific integrated circuit (ASIC) for a frequency-modulated differential chaos shift keying (FM-DCSK) communication system. The chip is conceived to serve as an experimental platform for the evaluation of the FM-DCSK modulation scheme, and includes several programming features toward this goal. The operation of the ASIC is herein illustrated for a data rate of 500 kb/s and a transmission bandwidth in the range of 17 MHz. Using signals acquired from the test platform, bit error rate (BER) estimations of the overall FM-DCSK communication link have been obtained assuming wireless transmission at the 2.4-GHz ISM band. Under all tested propagation conditions, including multipath effects, the system obtains a BER = 10-3 for Eb/No lower than 28 dB.Ministerio de Ciencia y Tecnología TIC2003-0235

Is Gastronomy A Relevant Factor for Sustainable Tourism? An Empirical Analysis of Spain Country Brand

Tourism has become a fundamental industry for the economic growth of many countries. Due to this, there is growing competitiveness among the different destinations to attract as many tourists as possible. As a result, disciplines such as marketing have developed tools to differentiate some destinations from others and concepts such as place branding and country brand have emerged. One of the key factors forming the country brand is gastronomy, as food tourism is one way to reduce the growing problem of sustainability in tourism, as it impacts different aspects of the country’s environment. However, there is a great lack of scientific works that relate both variables. In this paper, we propose to establish that, in the case of Spain, tourists’ perception of Spanish gastronomy is a key element of its country brand. To do that, this study relies on the use of Partial Least Squares Structural Equations Modeling (PLS-SEM) using a 496 cases data set

A high dynamic range image sensor with linear response based on asynchronous event detection

This paper investigates the potential of an image sensor that combines event-based asynchronous outputs with conventional integration of photocurrents. Pixels voltages can be read out following a traditional approach with a source follower and analog-to-digital converter. Furthermore, pixels have circuitry to implement Pulse Density Modulation (PDM) sending out pulses with a frequency that is proportional to the photocurrent. Both read-out approaches operate simultaneously. Their information is combined to render high dynamic range images. In this paper, we explain the new vision sensor concept and we develop a theoretical analysis of the expected performance in standard AMS 0.18mm HV technology. Moreover, we provide a description of the vision sensor architecture and its main blocksMinisterio de Economía, Industria y Competitividad TEC2012-38921-C02-02European Union IPT-2011-1625-430000Office of Naval Research (USA) N00014-14-1-035

On the Analysis and Detection of Flames Withan Asynchronous Spiking Image Sensor

We have investigated the capabilities of a customasynchronous spiking image sensor operating in the NearInfrared band to study flame radiation emissions, monitortheir transient activity, and detect their presence. Asynchronoussensors have inherent capabilities, i.e., good temporal resolution,high dynamic range, and low data redundancy. This makesthem competitive against infrared (IR) cameras and CMOSframe-based NIR imagers. In this paper, we analyze, discuss,and compare the experimental data measured with our sensoragainst results obtained with conventional devices. A set ofmeasurements have been taken to study the flame emissionlevels and their transient variations. Moreover, a flame detectionalgorithm, adapted to our sensor asynchronous outputs, has beendeveloped. Results show that asynchronous spiking sensors havean excellent potential for flame analysis and monitoring.Universidad de Cádiz PR2016-07Ministerio de Economía y Competitividad TEC2015-66878-C3-1-RJunta de Andalucía TIC 2012-2338Office of Naval Research (USA) N00014141035

Baseband-processor for a passive UHF RFID transponder

This paper describes the design of a digital processor targeting the Class-1 Generation-2 EPC Protocol for UHF RFID transponders, and proposes different techniques for reducing its power consumption. The processor has been implemented in a 0.35μm CMOS technology process using automatic tools for both the logic synthesis and layout. Post-layout simulations confirm the fully functionality of the prototype and predict a worst-case power consumption of only 2.9μA at 1.2V supply.Ministerio de Educación y Ciencia TEC2006-03022, TEC2009-08447Junta de Andalucía TIC-0281