1,277 research outputs found
Improving Food Security of Highly Weathered Soils of GĂčruĂ© District, Mozambique.
M.S. Thesis. University of HawaiÊ»i at MÄnoa 2017
A review on flexible electrochemical biosensors to monitor alcohol in sweat
The continued focus on improving the quality of human life has encouraged the development of increasingly efficient, durable, and cost-effective products in healthcare. Over the last decade, there has been substantial development in the field of technical and interactive textiles that combine expertise in electronics, biology, chemistry, and physics. Most recently, the creation of textile biosensors capable of quantifying biometric data in biological fluids is being studied, to detect a specific disease or the physical condition of an individual. The ultimate goal is to provide access to medical diagnosis anytime and anywhere. Presently, alcohol is considered the most commonly used addictive substance worldwide, being one of the main causes of death in road accidents. Thus, it is important to think of solutions capable of minimizing this public health problem. Alcohol biosensors constitute an excellent tool to aid at improving road safety. Hence, this review explores concepts about alcohol biomarkers, the composition of human sweat and the correlation between alcohol and blood. Different components and requirements of a biosensor are reviewed, along with the electrochemical techniques to evaluate its performance, in addition to construction techniques of textile-based biosensors. Special attention is given to the determination of biomarkers that must be low cost and fast, so the use of biomimetic materials to recognize and detect the target analyte is turning into an attractive option to improve electrochemical behavior.Authors acknowledge the Portuguese Foundation for Science and Technology (FCT),
FEDER funds by means of Portugal 2020 Competitive Factors Operational Program (POCI) and the
Portuguese Government (OE) for funding the project PluriProtechââDesenvolvimentos de soluçÔes
multicamada para proteção ativa contra ameaças NBQRâ, ref. POCI-01-0247-FEDER-047012. Authors
also acknowledge strategic funding of UID/CTM/00264/2020 of 2C2T and by the âplurianualâ
2020â2023 Project UIDB/00264/2020
Endotoxin-induced disseminated intravascular coagulation in rabbits: effect of recombinant hirudin on hemostatic parameters, fibrin deposits, and mortality
We evaluated the effect of r-hirudin on an experimental model of disseminated intravascular coagulation (DIC) in rabbits, through the continuous infusion of 100 microg/kg/hr of Escherichia coli endotoxin for a period of 6 hours. r-Hirudin (0.05, 0.3, and 0.6 mg/kg/hr) as treatment, or saline solution as placebo, were administered simultaneously with endotoxin. Severe DIC in the endotoxin control group was shown by impairment in hemostatic parameters, kidney fibrin deposition, and a high mortality rate. Medium and high doses of r-hirudin led to an improvement in such DIC-related parameters as platelet numbers and fibrinogen and protein C concentrations. High-dose r-hirudin also reduced consumption of antithrombin III (ATIII). All doses of r-hirudin prevented decreases in tissue plasminogen activator (t-PA) and reduced the increase in plasminogen activator inhibitor-1 (PAI-1) activity observed at 2 hours after endotoxin administration. A significant reduction in kidney fibrin deposition was seen in medium- and high-dose r-hirudin groups. Additionally, the mortality rate in rabbits receiving medium- and high-dose r-hirudin was 10%, and that in rabbits receiving low-dose r-hirudin was 20%, as compared with a mortality rate of 70% in the control group. Protein C activity was significantly lower (p < 0.001) in nonsurviving rabbits. Moreover, there was a strong positive correlation (r = 0.68, p < 0.001) between protein C consumption and kidney fibrin deposition. We conclude that r-hirudin can be a useful drug in the clinical treatment of DIC
Supercapacitors based on AC/MnO2 deposited onto dip-coated carbon nanofiber cotton fabric electrodes
This work introduces the preparation of flexible carbon composite electrodes based on the top-down approach starting from the dip-coating of carbon nanofibers (CNFs) onto a cotton fabric. On these so-obtained conductive cotton fabrics, further layers of activated carbon and manganese oxide (MnO2) materials were subsequently added to enhance the electrochemical performances of negative and positive electrodes. At the end, two different types of asymmetric supercapacitors (SCs) were assembled with those textile electrodes by using porous paper and Nafion-Na ion-exchange membranes as separators. The different SCs were electrochemically characterized by means of cyclic voltammetry (CV), galvanostatic charge/discharge (GâCD) and electrochemical impedance spectroscopy (EIS). These hybrid carbon-based textile SCs exhibited capacitance performance of 138 and 134 F gâ1 with the porous paper and Nafion membrane, respectively, and low self-discharge rates. Furthermore, in this study is considered the combination of two methods (cycling and floating) for studying the long-term durability tests of SCs. In particular, the floating methodology utilizes much more harsh conditions than the common cycling based on G-CD tests at high currents usually discussed in literature. The solid-state (Nafion membrane) hybrid device demonstrated very long durability with 10 K cycles and additional 270 h at a constant voltage of 1.6 V. In summary, the hybrid SCs fabricated with low cost materials and simple methodologies reported in this study showed very promising results for flexible energy storage applications.This work was partly financed by FEDER funds through the
Competitivity Factors Operational Programme - COMPETE and by
national funds through FCT â Foundation for Science and Technology
(project POCI-01-0145-FEDER-007136). A.J. Paleo acknowledges the
European COST Action CA15107- Multi-Functional Nano-Carbon
Composite Materials Network (MultiComp) for its support with a
Short Term Scientific Mission (STSM) grant at CNR-ITAE of
Messina
Recommended from our members
Nonlinear Thermopower Behaviour of N-Type Carbon Nanofibres and Their Melt Mixed Polypropylene Composites
The temperature dependent electrical conductivity Ï (T) and thermopower (Seebeck coeffi-cient) S (T) from 303.15 K (30⊠C) to 373.15 K (100⊠C) of an as-received commercial n-type vapour grown carbon nanofibre (CNF) powder and its melt-mixed polypropylene (PP) composite with 5 wt.% of CNFs have been analysed. At 30⊠C, the Ï and S of the CNF powder are ~136 S mâ1 and â5.1 ”V Kâ1, respectively, whereas its PP/CNF composite showed lower conductivities and less negative S-values of ~15 S mâ1 and â3.4 ”V Kâ1, respectively. The Ï (T) of both samples presents a dÏ/dT 0 character, also observed in some doped multiwall carbon nanotube (MWCNT) mats with nonlinear thermopower behaviour, and explained here from the contribution of impurities in the CNF structure such as oxygen and sulphur, which cause sharply varying and localized states at approximately 0.09 eV above their Fermi energy level (EF)
Electronic features of cotton fabric e-textiles prepared with aqueous carbon nanofiber inks
Cotton woven fabrics functionalized with aqueous inks made with carbon nanofibers (CNFs) and anionic surfactant are prepared via dip-coating followed by heat treatment, and their electronic properties are discussed. The e-textiles prepared with the inks made with the highest amount of CNFs (6.4 mg mLâ1 ) show electrical conductivities (Ï) of âŒ35 S mâ1 and a negative Seebeck (S) of â6 ÎŒV Kâ1 at 30 °C, which means that their majority carriers are electrons. The Ï(T) of the e-textiles from 30 to 100 °C shows a negative temperature effect, interpreted as a thermally activated hopping mechanism across a random network of potential wells by means of the 3D variable range hopping (VRH) model. Likewise, their S(T) from 30 to 100 °C shows a negative temperature effect, conveniently depicted by the same model proposed for describing the negative Seebeck of doped multiwall carbon nanotube mats. From this model, it is deduced that the cause of the negative Seebeck in the e-textiles may arise from the contribution of the impurities found in the as-received CNFs, which cause sharply varying and localized states at approximately 0.085 eV above their Fermi energy level (EF). Moreover, the possibility of a slight n-doping from the cellulose fibers of the fabrics and the residuals of the anionic surfactant onto the most external CNF graphitic shells present in the e-textiles is also discussed with the help of the Ï(T) and S(T) analysis.This research was funded by the project UID/CTM/00264/2021 of 2C2T under the COMPETE and FCT/MCTES
(PIDDAC) cofinanced by FEDER through the PT2020 program. E.M. acknowledges financial support from ANID
Anillo ACT/192023 and Fondecyt No 1190361
Thermoelectric properties of polypropylene carbon nanofiber melt-mixed composites: exploring the role of polymer on their Seebeck coefficient
The effect of polypropylene (PP) on the Seebeck coefficient (S) of carbon nanofibers (CNFs) in melt-extruded PP composites filled with up to 5 wt. % of CNFs was analyzed in this study. The as-received CNFs present an electrical conductivity of ~320âSâmâ1 and an interesting phenomenon of showing negative S-values of â5.5âÎŒVKâ1, with 10â2â”W/mK2 as the power factor (PF). In contrast, the PP/CNF composites with 5 wt. % of CNFs showed lower conductivities of ~50âSâmâ1, less negative S-values of â3.8âÎŒVKâ1, and a PF of 7âĂâ10â4â”W/mK2. In particular, the change in the Seebeck coefficient of the PP/CNF composites is explained by a slight electron donation from the outer layers of the CNFs to the PP molecules, which could reduce the S-values of the as-received CNFs. Our study indicates that even insulating polymers such as PP may have a quantifiable effect on the intrinsic Seebeck coefficient of carbon-based nanostructures, and this fact should also be taken into consideration to tailor conductive polymer composites with the desired thermoelectric (TE) properties.The authors affiliated with 2C2T acknowledge
support from FCT-Foundation for Science and Technology within the
scope of project UID/CTM/00264/2020. In addition, support through project IF/
A. J. Paleo et al.
00894/2015 and within the scope of the project CICECO-Aveiro
Institute of Materials, UIDB/50011/2020 and UIDP/50011/2020 and
access to the Navigator platform (LCA-UC) through the Advanced
Computing Project CPCA/A2/2524/2020, financed by national funds
through the Portuguese Foundation for Science and Technology I.P./
MCTES, is gratefully acknowledged
Pontine calcification in late stage cerebellar multiple system atrophy: a marker of synucleinopathy neurodegeneration?
Univ Fed Sao Paulo, Dept Neurol, Unidade Ataxia, Sao Paulo, SP, BrazilHosp Israelita Albert Einstein, Sao Paulo, SP, BrazilFac Ciencias Med Santa Casa Sao Paulo, Div Radiol, Sao Paulo, SP, BrazilUniv Fed Sao Paulo, Dept Neurol, Unidade Ataxia, Sao Paulo, SP, BrazilWeb of Scienc
Effects of low molecular weight heparin, alone or combined with antithrombin III, on mortality, fibrin deposits and hemostatic parameters in endotoxin-induced disseminated intravascular coagulation in rabbits
The effect of low molecular weight heparin (LMWH) with or without antithrombin III (AT III) has been studied in a rabbit model of disseminated intravascular coagulation (DIC) induced by continuous infusion of 100 microg/kg/hr of Escherichia coli endotoxin for 6 hr. LMWH (5 and 10 IU/kg/hr/6 hr), alone or in combination with AT III (20 U/kg/hr/6 hr), or saline were administered simultaneously with endotoxin. Hemostatic markers at 0, 2, and 6 hr as well as kidney fibrin deposits and the mortality rate at 24 hr were determined. Rabbits receiving only endotoxin showed an impairment in hemostasis, as well as high kidney fibrin deposits and a high mortality rate. LMWH alone did not exert any effect. The simultaneous infusion of LMWH and AT III exerted a beneficial effect on the hemostatic markers and reduced the kidney fibrin deposits as well as the mortality rate in a LMWH dose-dependent manner. Fibrinogen and protein C consumption were significantly higher and renal fibrin deposits more intense in the rabbits that had died in the first 24 hr. There was also a significant positive correlation between kidney fibrin deposits and platelets, fibrinogen, and protein C consumption, taking the whole rabbit population. It is concluded that the simultaneous infusion of LMWH and AT III is useful in this DIC model and would make it possible to reduce significantly the AT III doses used when AT III is given alone
Effect of the administration of recombinant hirudin and/or tissue-plasminogen activator (t-PA) on endotoxin-induced disseminated intravascular coagulation model in rabbits
We evaluated the effect of r-hirudin and/or tissue-plasminogen activator (t-PA) in a model of DIC in rabbits induced by i.v. infusion of 100 micrograms/kg/h/6 h endotoxin. Rabbits were treated with saline (endotoxin control group), r-hirudin at 0.3 mg/kg/h/6 h, t-PA at 0.3 mg/kg for 90 min and r-hirudin plus t-PA at the doses described above. The best results were achieved when r-hirudin and t-PA were infused together. This treatment reduced the consumption of platelets and protein C and attenuated the increase of PAI-1 more efficiently than r-hirudin or t-PA alone. r-Hirudin plus t-PA also resulted in the lowest formation of fibrin deposits in the kidneys. Finally, mortality at 24 h dropped from 70% in the endotoxin control group to 40%, 10% and 0% in the t-PA, r-hirudin and r-hirudin plus t-PA groups respectively. None of the t-PA-infused rabbits which had died by 24 h showed macroscopic signs of haemorrhage. r-Hirudin alone was better than t-PA alone, as was shown by fibrin deposits and mortality. We conclude that r-hirudin and t-PA given simultaneously were more efficient than either given alone in this model of DIC. Effective thrombin inhibition, which could influence other pathophysiological mechanisms apart from coagulation, together with the improvement in fibrinolysis, would explain these results
- âŠ