Bench-top X-ray microtomography complemented with spatially localized X-ray scattering experiments

This article describes a novel experimental setup that combines X-ray microtomography (XMT) scans with in situ X-ray scattering experiments in a laboratory setting. Combining these two methods allows the characterization of both the micrometre-scale morphology and the crystallographic properties of the sample without removing it from the setup. Precise control of the position of the sample allows an accurate choice of the scattering beam path through the sample and facilitates the performance of X-ray scattering experiments on submillimetre-sized samples. With the present setup, a voxel size of less than 0.5 mm is achievable in the XMT images, and scattering experiments can be carried out with a beam size of approximately 200 200 mm. The potential of this setup is illustrated with the analysis of micrometeorite crystal structure and diffraction tomographic imaging of a silver behenate phantom as example applications.Peer reviewe

X-ray studies on the nano- and microscale anisotropy in compacted clays : Comparison of bentonite and purified calcium montmorillonite

Peer reviewe

The structure of Lactobacillus brevis surface layer reassembled on liposomes differs from native structure as revealed by SAXS

AbstractThe reassembly of the S-layer protein SlpA of Lactobacillus brevis ATCC 8287 on positively charged liposomes was studied by small angle X-ray scattering (SAXS) and zeta potential measurements. SlpA was reassembled on unilamellar liposomes consisting of 1-palmitoyl-2-oleyl-sn-glycero-3-phosphocholine and 1,2-dioleoyl-3-trimethylammonium-propane, prepared by extrusion through membranes with pore sizes of 50nm and 100nm. Similarly extruded samples without SlpA were used as a reference. The SlpA-containing samples showed clear diffraction peaks in their SAXS intensities. The lattice constants were calculated from the diffraction pattern and compared to those determined for SlpA on native cell wall fragments. Lattice constants for SlpA reassembled on liposomes (a=9.29nm, b=8.03nm, and γ=84.9°) showed a marked change in the lattice constants b and γ when compared to those determined for SlpA on native cell wall fragments (a=9.41nm, b=6.48nm, and γ=77.0°). The latter are in good agreement with values previously determined by electron microscopy. This indicates that the structure formed by SlpA is stable on the bacterial cell wall, but SlpA reassembles into a different structure on cationic liposomes. From the (10) reflection, the lower limit of crystallite size of SlpA on liposomes was determined to be 92nm, corresponding to approximately ten aligned lattice planes

Visualizing water-filled versus embolized status of xylem conduits by desktop x-ray microtomography

Background The hydraulic conductivity of the stem is a major factor limiting the capability of trees to transport water from the soil to transpiring leaves. During drought conditions, the conducting capacity of xylem can be reduced by some conduits being filled with gas, i.e. embolized. In order to understand the dynamics of embolism formation and repair, considerable attention has been given to developing reliable and accurate methods for quantifying the phenomenon. In the past decade, non-destructive imaging of embolism formation in living plants has become possible. Magnetic resonance imaging has been used to visualize the distribution of water within the stem, but in most cases it is not possible to resolve individual cells. Recently, high-resolution synchrotron x-ray microtomography has been introduced as a tool to visualize the water contents of individual cells in vivo, providing unprecedented insight into the dynamics of embolism repair. We have investigated the potential of an x-ray tube -based microtomography setup to visualize and quantify xylem embolism and embolism repair in water-stressed young saplings and shoot tips of Silver and Curly birch (Betula pendula and B. pendula var. carelica). Results From the microtomography images, the water-filled versus gas-filled status of individual xylem conduits can be seen, and the proportion of stem cross-section that consists of embolized tissue can be calculated. Measuring the number of embolized vessels in the imaged area is a simple counting experiment. In the samples investigated, wood fibers were cavitated in a large proportion of the xylem cross-section shortly after watering of the plant was stopped, but the number of embolized vessels remained low several days into a drought period. Under conditions of low evaporative demand, also refilling of previously embolized conduits was observed. Conclusions Desktop x-ray microtomography is shown to be an effective method for evaluating the water-filled versus embolized status of the stem xylem in a small living sapling. Due to its non-destructive nature, the risk of inducing embolisms during sampling is greatly reduced. Compared with synchrotron imaging beamlines, desktop microtomography offers easier accessibility, while maintaining sufficient resolution to visualize the water contents of individual cells.Peer reviewe

Ultrastructural evaluation of compression wood-like properties of common juniper (Juniperus communis L.)

Peer reviewe

Delivering Agents Locally into Articular Cartilage by Intense MHz Ultrasound

There is no cure for osteoarthritis. Current drug delivery relies on systemic delivery or injections into the joint. Because articular cartilage (AC) degeneration can be local and drug exposure outside the lesion can cause adverse effects, localized drug delivery could permit new drug treatment strategies. We investigated whether intense megahertz ultrasound (frequency: 1.138 MHz, peak positive pressure: 2.7 MPa, I-spta: 5 W/cm(2), beam width: 5.7 mm at -6 dB, duty cycle: 5%, pulse repetition frequency: 285 Hz, mechanical index: 1.1) can deliver agents into AC without damaging it. Using ultrasound, we delivered a drug surrogate down to a depth corresponding to 53% depth of the AC thickness without causing histologically detectable damage to the AC. This may be important because early osteoarthritis typically exhibits histopathologic changes in the superficial AC. In conclusion, we identify intense megahertz ultrasound as a technique that potentially enables localized non-destructive delivery of osteoarthritis drugs or drug carriers into articular cartilage. (E-mail: [email protected]) (C) 2015 World Federation for Ultrasound in Medicine & Biology.Peer reviewe

Use of amaranth, quinoa and kañiwa in extruded corn-based snacks

Amaranth (Amaranthus caudatus), quinoa (Chenopodium quinoa) and kañiwa (Chenopodium pallidicaule) are pseudocereals regarded as good gluten-free sources of protein and fiber. A co-rotating twin screw extruder was used to obtain corn-based extrudates containing amaranth/quinoa/kañiwa (20% of solids). Box–Behnken experimental design with three independent variables was used: water content of mass (WCM, 15–19%), screw speed (SS, 200–500 rpm) and temperature of the die (TEM, 150–170 °C). Milled and whole samples were stored in open headspace vials at 11 and 76% relative humidity (RH) for a week before being sealed and stored for 9 weeks in the dark. Hexanal content was determined by using headspace gas chromatography. Extrudates containing amaranth presented the highest sectional expansion index (SEI) (p < 0.01) while pure corn extrudates (control) presented the lowest SEI and greatest hardness (p < 0.01). SEI increased with increasing SS and decreasing WCM. In storage, whole extrudates exposed to 76% RH presented the lowest formation of hexanal. This study proved that it was possible to increase SEI by adding amaranth, quinoa and kañiwa to pure corn flour. The evaluation of lipid oxidation suggested a remarkable stability of whole extrudates after exposure to high RH.Peer reviewe

Hydrophobin Film Structure for HFBI and HFBII and Mechanism for Accelerated Film Formation

Peer reviewe