Manganese surface segregation in NiMnSb

A quantitative analysis of the surface composition of the Heusler alloy NiMnSb has been undertaken using angle-resolved x-ray photoemission spectroscopy and the surface composition characterized. With sufficient annealing cycles, the stoichiometric surface evolves to a surface that is manganese rich. This indicates that the surface enthalpy is different from the bulk for the Heusler alloy NiMnSb. ©2000 American Institute of Physics

EPITAXIE DE L'ALLIAGE D'HEUSLER DEMI-METALLIQUE NIMNSB (CROISSANCE, PROPRIETES DE SURFACE ET JONCTIONS TUNNEL HOMOEPITAXIEES)

GRENOBLE1-BU Sciences (384212103) / SudocSudocFranceF

Impact of plasma operating conditions on the ion energy and angular distributions in dual-frequency capacitively coupled plasma reactors using CF4 chemistry

International audienceA two-dimensional hybrid model is used to simulate an industrial dual-frequency capacitively coupled plasma reactor working at closely spaced frequencies (13.56–40.68 MHz) in pure CF4 chemistry. The goal is to understand how plasma operating conditions (pressure, low-frequency and high-frequency RF powers, and chamber wall conditions) influence critical etching parameters such as the ion energy and angular distribution (IEAD) and the ion flux at the wafer. In base case conditions, the ionic and radical composition at the center of the plasma is analyzed, revealing CF3+ and F− as the primary ions, and F, CF, CF3, CF2, and F2 as the predominant radicals (by decreasing density). The impact of the surface recombination coefficient of F radicals into F2 at the reactor walls, γ(rec,F > F2), is then explored; it is found that increasing γ(rec,F > F2) has a strong impact on the final plasma composition, decreasing CF and F densities while increasing CF3, CF2, and F densities, which highlights the importance of properly considering wall conditions in CF-based plasmas simulation. The IEAD at the wafer is then characterized, showing that the total IEAD shape is affected by the plasma ion composition: heavy ions such as CF3+ (69 amu) form the core of the distribution while lighter species such as F+ (19 amu) form the wing of the distribution due to their lower mass. The low frequency (LF) power (100–900 W) is shown to substantially modify the ion energy distribution function (IEDF) owing to sheath voltage changes, but to also marginally increase the ion flux at the wafer. Conversely, the high-frequency (HF) power (100–1500 W) strongly impacts the ion flux at the wafer due to HF voltage fluctuations, while the IEDF remains mostly unaffected. This study also reveals some coupling between the effects of the LF (13.56 MHz) and HF (40.68 MHz) power, a phenomenon attributable to their proximity in frequency which should not be neglected. Finally, increasing the pressure from 30 to 200 mTorr is found to increase the electronegativity by a factor 4 and to strongly impact the plasma structure, primarily due to variations in ion mobility; it also widens the ion angular spread, potentially influencing etch uniformity. Notably, higher pressures exceeding 100 mTorr result in a decrease in the average ion density and the emergence of a low-energy peak in the ion energy distribution, attributed to charge exchange collisions

The surface terminal layer and composition of the colossal magnetoresistance perovskite: La\u3csub\u3e0.65\u3c/sub\u3ePb\u3csub\u3e0.35\u3c/sub\u3eMnO\u3csub\u3e3\u3c/sub\u3e

The composition in the surface region of the colossal magnetoresistance perovskite manganite materials, La0.65Pb0.35MnO3 has been studied using angle resolved x-ray photoemission spectroscopy. The results are consistent with a Mn–O terminal layer and Pb segregation to the near-surface region. This is similar to the behavior exhibited by La0.65Pb0.35MnO3 and La0.65Pb0.35MnO3. The O–Mn–O terminal layer appears to be close to the Mn3+ valence state. ©2000 American Institute of Physics

Role of the mask on contact etching at the 20 nm node

International audienc

The Polarization of Sb Overlayers on NiMnSb(100)

We have investigated the induced polarization of paramagnetic Sb overlayers on the Heusler alloy NiMnSb. From combined X-ray absorption spectroscopy (XAS) and spin-polarized inverse photoemission spectroscopy (SPIPES), we can assign some of the unoccupied states of the Heusler alloy NiMnSb. With increasing thickness of the Sb overlayer, there is a decline in the density of states near the Fermi energy, as expected for a semimetal overlayer on a metallic substrate. While the Sb is polarized by the ferromagnetic NiMnSb substrate, consistent with the expectations of mean field theory, the polarization at the center of the surface/overlayer Brillouin zone cannot be easily related to the induced magnetization