Ultrafast polychromatic ionization of dielectric solids

The modeling of the laser-induced damage processes can be divided into thermal and electronic processes. Especially, electronic damage seems to be well understood. In corresponding models, the damage threshold is linked to the excitation of valence electrons into the conduction band, and often the damage is obtained if a critical density of free electrons is exceeded. For the modeling of the electronic excitation, rate equation models are applied which can vary in the different terms representing different excitation channels. According to the current state of the art, photoionization and avalanche ionization contribute the major part to the ionization process, and consequently the determination of laser-induced damage thresholds is based on the calculation of the respective terms. For the theoretical description of both, well established models are available. For the quantitative calculation of the photoionization, the Keldysh theory is used most frequently, and for the avalanche processes the Drude theory is often applied. Both, Drude and Keldysh theory calculations depend on the laser frequency and use a monochromatic approach. For most applications the monochromatic description matches very well with the experimental findings, but in the range of few-cycle pulses the necessary broadening of the laser emission spectrum leads to high uncertainty for the calculation. In this paper, a novel polychromatic approach is presented including photo-and avalanche ionization as well as the critical electron density. The simulation combines different ionization channels in a Monte-Carlo procedure according to the frequency distribution of the spectrum. The resulting influence on the wavelength and material dependency is discussed in detail for various pulse shapes and pulse durations. The main focus of the investigation is concentrated on the specific characteristics in the dispersion and material dependency of the laser-induced damage threshold respecting the polychromatic characteristics of the ultra-short pulse (USP) laser damage. © 2016 SPIE. Downloading of the abstract is permitted for personal use only.Ministry for Science and Culture of Lower SaxonyVolkswagen Stiftun

Improved LIDT values for dielectric dispersive compensating mirrors applying ternary composites

The present contribution is addressed to an improved method to fabricate dielectric dispersive compensating mirrors (CMs) with an increased laser induced damage threshold (LIDT) by the use of ternary composite layers. Taking advantage of a novel in-situ phase monitor system, it is possible to control the sensitive deposition process more precisely. The study is initiated by a design synthesis, to achieve optimum reflection and GDD values for a conventional high low stack (HL)n. Afterwards the field intensity is analyzed, and layers affected by highest electric field intensities are exchanged by ternary composites of TaxSiyOz. Both designs have similar target specifications whereby one design is using ternary composites and the other one is distinguished by a (HL)n. The first layers of the stack are switched applying in-situ optical broad band monitoring in conjunction with a forward re-optimization algorithm, which also manipulates the layers remaining for deposition at each switching event. To accomplish the demanded GDD-spectra, the last layers are controlled by a novel in-situ white light interferometer operating in the infrared spectral range. Finally the CMs are measured in a 10.000 on 1 procedure according to ISO 21254 applying pulses with a duration of 130 fs at a central wavelength of 775 nm to determine the laser induced damage threshold. © 2016 SPIE. Downloading of the abstract is permitted for personal use only.DFG/EXC/QUESTVolkswagen StiftungBMBF/13N1155

Shallow-Water Coral Reefs in Transition: Examples from Belize and The Bahamas

Reprinted from: Ronald D. Lewis and Bruce C. Panuska (eds.) Proceedings of the 11th Symposium on the Geology of the Bahamas and Other Carbonate Regions: San Salvador, Gerace Research Cente

Deposition and spectral performance of an inhomogeneous broadband wide-angular antireflective coating

The gradient index coatings and optical filters based on them are a challenge for fabrication. In a round-robin experiment basically the same hybrid antireflection coating for the visible spectral region has been deposited with three different techniques: electron beam evaporation, ion beam sputtering and radio frequency magnetron-sputtering. Spectral performances of such one-side and both-side coated samples have been compared with corresponding theoretical spectra of the designed profile. Also, reproducibility of each process is checked

First measurement of the Non-instantaneous response Time of a χ(3) nonlinear optical effect

The third harmonic of a few-cycle pulse, generated at different dielectric surfaces, is investigated using interferometric frequency-resolved optical gating. We present direct experimental evidence for a non-instantaneous nonlinear response in a TiO2 thin film whereas surface third-harmonic generation in a SiO2 sample does not show any indication for non-instanteneity. To the best of our knowledge, this constitutes the first report of a non-instantaneous nonlinear optical response of a dielectric optical material

Dynamic liquefaction of shear zones in intact loess during simulated earthquake loading

The 2010-2011 Canterbury earthquake sequence in New Zealand exposed loess-mantled slopes in the area to very high levels of seismic excitation (locally measured as >2 g). Few loess slopes showed permanent local downslope deformation, and most of these showed only limited accumulated displacement. A series of innovative dynamic back pressured shear-box tests were undertaken on intact and remoulded loess samples collected from one of the recently active slopes replicating field conditions under different simplified horizontal seismic excitations. During each test, the strength reduction and excess pore water pressures generated were measured as the sample failed. Test results suggest that although dynamic liquefaction could have occurred, a key factor was likely to have been that the loess was largely unsaturated at the times of the large earthquake events. The failure of intact loess samples in the tests was complex and variable due to the highly variable geotechnical characteristics of the material. Some loess samples failed rapidly as a result of dynamic liquefaction as seismic excitation generated an increase in pore-water pressure, triggering rapid loss of strength and thus of shear resistance. Following initial failure, pore pressure dissipated with continued seismic excitation and the sample consolidated, resulting in partial shear-strength recovery. Once excess pore-water pressures had dissipated, deformation continued in a critical effective stress state with no further change in volume. Remoulded and weaker samples, however, did not liquefy, and instead immediately reduced in volume with an accompanying slower and more sustained increase in pore pressure as the sample consolidated. Thereafter excess pressures dissipated and deformation continued at a critical state. The complex behaviour explained why, despite exceptionally strong ground shaking, there was only limited displacement and lack of run-out: dynamic liquefaction was unlikely to occur in the freely draining slopes. Dynamic liquefaction however remained a plausible mechanism to explain loess failure in some of the low-angle toe slopes, where a permanent water table was present in the loess

Gestural communication of the gorilla (Gorilla gorilla): repertoire, intentionality and possible origins

Social groups of gorillas were observed in three captive facilities and one African field site. Cases of potential gesture use, totalling 9,540, were filtered by strict criteria for intentionality, giving a corpus of 5,250 instances of intentional gesture use. This indicated a repertoire of 102 gesture types. Most repertoire differences between individuals and sites were explicable as a consequence of environmental affordances and sampling effects: overall gesture frequency was a good predictor of universality of occurrence. Only one gesture was idiosyncratic to a single individual, and was given only to humans. Indications of cultural learning were few, though not absent. Six gestures appeared to be traditions within single social groups, but overall concordance in repertoires was almost as high between as within social groups. No support was found for the ontogenetic ritualization hypothesis as the chief means of acquisition of gestures. Many gestures whose form ruled out such an origin, i.e. gestures derived from species-typical displays, were used as intentionally and almost as flexibly as gestures whose form was consistent with learning by ritualization. When using both classes of gesture, gorillas paid specific attention to the attentional state of their audience. Thus, it would be unwarranted to divide ape gestural repertoires into ‘innate, species-typical, inflexible reactions’ and ‘individually learned, intentional, flexible communication’. We conclude that gorilla gestural communication is based on a species-typical repertoire, like those of most other mammalian species but very much larger. Gorilla gestures are not, however, inflexible signals but are employed for intentional communication to specific individuals