1,491 research outputs found
Endohedrally confined hydrogen atom with a moving nucleus
We studied the hydrogen atom as a system of two quantum particles in
different confinement conditions; a spherical-impenetrable-wall cavity and a
fullerene molecule cage. The motion is referred to the center of spherical
cavities, and the Schr\"{o}dinger equation solved by means of a Generalized
Sturmian Function expansion in spherical coordinates. The solutions present
different properties from the ones described by the many models in the
literature, where the proton is fixed in space and only the electron is
considered as a quantum particle. Our results show that the position of the
proton (i.e. the center of mas of the H atom) is very sensitive to the
confinement condition, and could vary substantially from one state to another,
from being sharply centered to being localized outside the fullerene molecule.
Interchange of the localization characteristics between the states when varying
the strength of the fullerene cage and mass occurred through crossing
phenomena
Synthesis of zeolites from geological materials and industrial wastes for potential application in environmental problems
A thesis submitted in partial fulfilment of the requirements of the University of Wolverhampton for the degree of Doctor of PhilosophyZeolites are among the least-known products for environmental pollution control, separation science and technology. Due to their unique porous properties, they are used in various applications in petrochemical cracking, ion-exchange and separation and removal of gases and solvents. The preparation of synthetic zeolites from chemical reagents is expensive. Therefore, in order to reduce costs, zeolite researchers are seeking cheaper aluminosilicate bearing raw materials, such as clay minerals, to produce synthetic zeolites. This research concerns the synthesis of zeolites and zeotypes derived from low-cost materials like kaolinite (KAO), natural clinker (NC) and fly ash (FA). The motivation for using these sources as the starting materials in zeolite synthesis is driven by factors, such as they are cheap and available in bulk quantities, are currently under-utilized, have high workability, and require less water (or solution) for activation. The raw materials were activated by two different routes: (1) classic alkaline hydrothermal synthesis and (2) alkaline fusion prior to hydrothermal synthesis. In the first method, the synthesis of zeolitic materials was carried out generally in alkaline media, although KAO or its calcination product, metakaolinite (MTK), was also activated in the presence or absence of structure directing agents (SDAs) and additional silica (precipitated SiO2), with the last one determining the SiO2/Al2O3 ratio of the reaction mixture and the time given for zeolitization. Synthesis in fluoride- and calcium-bearing media was also used to activate kaolinite. The process of synthesis was optimized by applying a wide range of experimental conditions with a wide range of reaction temperature, time, mineralizer concentration and solid/solution ratio. In the second approach, an alkaline fusion step was conducted prior to hydrothermal treatment, because it plays an important role in enhancing the hydrothermal conditions for zeolite synthesis. On the other hand, this approach was adopted because it can dissolve more aluminosilicates. The main synthesis products obtained after activation of KAO in NaOH solutions included zeolite LTA (LTA), sodalite (SOD), cancrinite (CAN), faujasite (FAU), zeolite Na-P1 (GIS), JBW-type zeolite (JBW), analcime (ANA), whereas the activation of KAO in KOH solutions produced chabazite (CHA), zeolite Barrer-KF, phillipsite (PHI) and K-feldspar. The hydrothermal conversion of kaolinite in fluoride media did not produce successful results, although traces of FAU, GIS, CHA, SOD and CAN crystallized. The activation of KAO in the system CaO-SiO2-Al2O3-H2O promoted the formation of different calcium silicate hydrate (C-S-H) phases, including hydrogarnet (HYD) and tobermorite (TOB). Following the fusion approach, the main zeolitic phases obtained using NaOH as mineralizer were LTA and CAN. The main as-synthesized zeolites obtained from NC by the conventional hydrothermal treatment method include PHI, SOD and CAN. Using the fusion approach, FAU and LTA were obtained with NaOH as an activator, whereas non-zeolitic material crystallized when KOH was used. The main as-synthesized zeolitic materials obtained by hydrothermal reaction of FA include PHI, zeolite Barrer-KF, CHA and SOD with traces of TOB, ANA, zeolite LTF (LTF) and herschelite (HER), appearing occasionally. By the fusion approach, FAU was obtained with NaOH as activator, whereas no zeolitic material crystallized using KOH. Experimental results indicate that the method, mineralizer, concentration and time have strong effects on the type and degree of crystallinity of the synthesis products. On the other hand, the type and chemical composition of the as-synthesized products are strongly dependent on the chemical composition of the starting material. The chemistry of zeolite synthesis was subject to perturbations caused by the presence of impurities in the raw materials, which may remain insoluble during crystallization and cause undesired species to nucleate, developing mixtures of different types of zeolites. However, other physicochemical factors may play a very important role in the thermodynamics and kinetics of zeolite formation. The raw materials have very high contents of SiO2 and Al2O3, with SiO2/Al2O3 ratios appropriate for the synthesis of low-Si zeolitic materials with high crystallinity and cation exchange capacity (CEC). However, although zeolites’ CEC represents a very important characteristic quality in the removal of undesired species from polluted effluents, it is not the deciding factor in determining zeolite performance during ion exchange processes, since numerous other factors also need to be considered. Finally, the potential application of the raw materials and their as-synthesized products as low-cost sorbents in the remediation of metal ions and ammonium from wastewater effluents was investigated. PHI showed a lower efficiency than FAU. Selectivity of FAU for metal removal was, in decreasing order, Fe>As>Pb>Zn>Cu>Ni>Cr. Based on these results, the use of these materials has the potential to provide improved methods for the treatment of contaminated effluents
Impact of a rigid sphere onto an elastic membrane
We study the axisymmetric impact of a rigid sphere onto an elastic membrane
theoretically and experimentally. We derive governing equations from first
principles and impose natural kinematic and geometric constraints for the
coupled motion of the sphere and the membrane during contact. The free-boundary
problem of finding the contact surface, over which forces caused by the
collision act, is solved by an iterative method. This results in a model that
produces detailed predictions of the trajectory of the sphere, the deflection
of the membrane, and the pressure distribution during contact. Our model
predictions are validated against our direct experimental measurements.
Moreover, we identify new phenomena regarding the behaviour of the coefficient
of restitution for low impact velocities, the possibility of multiple contacts
during a single rebound, and energy recovery on subsequent bounces. Insight
obtained from this model problem in contact mechanics can inform ongoing
efforts towards the development of predictive models for contact problems that
arise naturally in multiple engineering applications
Caracterización de regímenes de corte del torno spectralight 0400 de la facultad de ingeniería mecánica universidad tecnológica de pereira
Para el proceso de integrar el torno de control numérico Spectralight 0400 a una Celda de Manufactura Flexible (FMC), se requiere definir las condiciones límites (máximas y mínimas) de operación del mismo, mediante el uso de la Teoría de corte, para diferentes materiales comerciales que se usarán en la Celda
Caracterización de regímenes de corte del torno spectralight 0400 de la facultad de ingeniería mecánica universidad tecnológica de pereira
Para el proceso de integrar el torno de control numérico Spectralight 0400 a una Celda de Manufactura Flexible (FMC), se requiere definir las condiciones límites (máximas y mínimas) de operación del mismo, mediante el uso de la Teoría de corte, para diferentes materiales comerciales que se usarán en la Celda
Capillary-scale solid rebounds:Experiments, modelling and simulations
A millimetre-size superhydrophobic sphere impacting on the free surface of a quiescent bath can be propelled back into the air by capillary effects and dynamic fluid forces, whilst transferring part of its energy to the fluid. We report the findings of a thorough investigation of this phenomenon, involving different approaches. Over the range from minimum impact velocities required to produce rebounds to impact velocities that cause the sinking of the solid sphere, we focus on the dependence of the coefficient of restitution, contact time and maximum surface deflection on the different physical parameters of the problem. Experiments, simulations and asymptotic analysis reveal trends in the rebound metrics, uncover new phenomena at both ends of the Weber number spectrum, and collapse the data. Direct numerical simulations using a pseudo-solid sphere successfully reproduce experimental data whilst also providing insight into flow quantities that are challenging to determine from experiments. A model based on matching the motion of a perfectly hydrophobic impactor to a linearised fluid free surface is validated against direct numerical simulations and used in the low Weber number regime. The hierarchical and cross-validated models in this study allow us to explore the entirety of our target parameter space within a challenging multi-scale system
Seasonal Expression of Apospory in Bahiagrass
Flowering plants can reproduce sexually (outcrossing and/or selfing) and/or asexually. Sexual reproduction implies the successful completion of meiosis and double fertilisation for the formation of both the embryo and the endosperm. In contrast, gametophytic apomixis is an asexual mode of reproduction through seeds that involves parthenogenetic embryo development from a cytologically unreduced egg cell (2n). Apospory is the process by which unreduced gametophytes are formed after a series of mitotic divisions of somatic cells (2n) in the ovary. This occurs independently from the sexual meiotic process; and therefore, both sexual and apomictic pathways may coexist simultaneously. Apospory is inherited in bahiagrass (Paspalum notatum) as a single dominant Mendelian factor with distorted segregation (Martínez et al. 2001), and its degree of expression was reported to vary throughout the flowering season in P. cromyorrhizon, a close relative of bahiagrass (Quarin 1986). Bahiagrass is a perennial warm-season grass widely used for forage and utility turf in the south-eastern US due to its persistence in sandy, infertile soils. Diploid races reproduce sexually and are highly self-incompatible (Acuña et al. 2007), while polyploids are classified as pseudogamous apomicts (pollination is required) (Quarin 1999). Sexual tetraploid genotypes have been experimentally created (Quesenberry and Smith 2003; Quesenberry et al. 2010) and successfully used in crosses (Acuña et al. 2009). Cytoembryological analysis has been used to determine the mode of reproduction in bahiagrass (Martínez et al. 2001; Acuña et al. 2007). At anthesis, sexual plants produce spikelets having only a single Polygonum type meiotic embryo sac (SES), characterised by bearing the egg apparatus close to the micropyla, a large binucleated central cell and a group of antipodal cells at the chalazal end (Figure 1a). Highly apomictic plants produce ovules having single or multiple aposporous embryo sacs (AES), which present the egg apparatus and a central cell with 2 polar nuclei, and no antipodal cells (Figure 1b). Some tetraploid bahiagrass races are also able to produce ovules that have the sexual meiotic megasporocyte together with one or more aposporous sacs (AES+SES), and these plants are classified as facultative apomictic.
The objective of this study was to characterise the reproductive mode of 5 wild dwarf bahiagrasses, a highly apomictic hybrid (Acuña et al. 2009) and the cultivar ‘Argentine’ at different times during the flowering season and under different nitrogen (N) fertiliser rates
Medidas para mitigar problemas de estabilidad de voltaje
Actualmente existe una gran cantidad de información sobre estabilidad de voltaje en sistemas de potencia, la mayor parte de la cual trata sobre las metodologías para detectar las condiciones operativas que pueden llevar a problemas de inestabilidad y colapso. Sin embargo, un asunto de gran interés para quienes planean y operan los sistemas de potencia son las medidas que se pueden aplicar para mitigar estos problemas. Así, en este artículo se presenta un inventario de estas medidas, su descripción, taxonomía y áreas actuales de investigación y desarrollo
Heavy metal removal using alkali activated kaolinite in the Cao-Al2O3-Sio2- H2O system
The transformation of kaolinite was examined at 175°C for 24 h in the CaO-Al2O3-
SiO2-H2O (CASH) system, which is important in cement science and especially in,
cement chemistry and is closely related to the pozzolanic reaction, the CaO-aggregate
reaction and the glass fibre reinforcement of hardened cement. The hydration
products were characterized by X-ray diffraction, scanning electron microscopy,
Fourier transformed infrared spectroscopy, Magic Angle Spinning Nuclear Magnetic
Resonance and thermogravimetric analysis in order to elucidate their mineral chemistry
and microstructure. Results reveal that several poorly crystalline phases were formed,
with un-reacted Ca(OH)2
appearing at shorter reaction times. Hydrogarnet tends to
form more rapidly than tobermorite. It was transformed into aluminium-substituted
tobermorite with curing time. A batch experimental study confirmed that kaolinitebased
calcium silicate hydrates are effective for the treatment of acid mine drainage,
particularly in removing metal ions and ammoniu
- …