11,299 research outputs found
Integrated aerodynamic/dynamic optimization of helicopter rotor blades
An integrated aerodynamic/dynamic optimization procedure is used to minimize blade weight and 4 per rev vertical hub shear for a rotor blade in forward flight. The coupling of aerodynamics and dynamics is accomplished through the inclusion of airloads which vary with the design variables during the optimization process. Both single and multiple objective functions are used in the optimization formulation. The Global Criteria Approach is used to formulate the multiple objective optimization and results are compared with those obtained by using single objective function formulations. Constraints are imposed on natural frequencies, autorotational inertia, and centrifugal stress. The program CAMRAD is used for the blade aerodynamic and dynamic analyses, and the program CONMIN is used for the optimization. Since the spanwise and the azimuthal variations of loading are responsible for most rotor vibration and noise, the vertical airload distributions on the blade, before and after optimization, are compared. The total power required by the rotor to produce the same amount of thrust for a given area is also calculated before and after optimization. Results indicate that integrated optimization can significantly reduce the blade weight, the hub shear and the amplitude of the vertical airload distributions on the blade and the total power required by the rotor
Optimization methods applied to the aerodynamic design of helicopter rotor blades
Described is a formal optimization procedure for helicopter rotor blade design which minimizes hover horsepower while assuring satisfactory forward flight performance. The approach is to couple hover and forward flight analysis programs with a general-purpose optimization procedure. The resulting optimization system provides a systematic evaluation of the rotor blade design variables and their interaction, thus reducing the time and cost of designing advanced rotor blades. The paper discusses the basis for and details of the overall procedure, describes the generation of advanced blade designs for representative Army helicopters, and compares design and design effort with those from the conventional approach which is based on parametric studies and extensive cross-plots
Antimicrobial Susceptibilities of Aerobic Isolates from Respiratory Samples of Young New Zealand Horses
3rd Annual IEEE Energy Conversion Congress and Exposition, ECCE 2011, Phoenix, AZ, 17-22 September 2011This paper presents a method of mitigating the transient overshoots of DC-DC converters operating with large load disturbances. The method involves a small auxiliary power circuit with a complementary control scheme that provides a smooth absorption and release of excess energy from and to the main DC-DC converter in the events of large load changes. This control mechanism interactively mitigates the large transient overshoots which would otherwise appear at the converter output. Since the control scheme involves an adjustable-energy-storage feature, the proposed solution is effective for any level of step-load change within a pre-specified range.Department of Electronic and Information EngineeringRefereed conference pape
Application of multidisciplinary optimization methods to the design of a supersonic transport
An optimization design method is discussed. This method is based on integrating existing disciplinary analysis and sensitivity analysis techniques by means of generalized sensitivity equations. A generic design system implementing this method is described. The system is being used to design the configuration and internal structure of a supersonic transport wing for optimum performance. This problem combines the disciplines of linear aerodynamics, structures, and performance. Initial results which include the disciplines of aerodynamics and structures in a conventional minimum weight design under static aeroelastic constraints are presented
Luminescent hyperbolic metasurfaces.
When engineered on scales much smaller than the operating wavelength, metal-semiconductor nanostructures exhibit properties unobtainable in nature. Namely, a uniaxial optical metamaterial described by a hyperbolic dispersion relation can simultaneously behave as a reflective metal and an absorptive or emissive semiconductor for electromagnetic waves with orthogonal linear polarization states. Using an unconventional multilayer architecture, we demonstrate luminescent hyperbolic metasurfaces, wherein distributed semiconducting quantum wells display extreme absorption and emission polarization anisotropy. Through normally incident micro-photoluminescence measurements, we observe absorption anisotropies greater than a factor of 10 and degree-of-linear polarization of emission >0.9. We observe the modification of emission spectra and, by incorporating wavelength-scale gratings, show a controlled reduction of polarization anisotropy. We verify hyperbolic dispersion with numerical simulations that model the metasurface as a composite nanoscale structure and according to the effective medium approximation. Finally, we experimentally demonstrate >350% emission intensity enhancement relative to the bare semiconducting quantum wells
Antimicrobial Susceptibilities of Aerobic Isolates from Respiratory Samples of Young New Zealand Horses
First-principles study of vibrational and dielectric properties of {\beta}-Si3N4
First-principles calculations have been conducted to study the structural,
vibrational and dielectric properties of {\beta}-Si3N4. Calculations of the
zone-center optical-mode frequencies (including LO-TO splittings), Born
effective charge tensors for each atom, dielectric constants, using density
functional perturbation theory, are reported. The fully relaxed structural
parameters are found to be in good agreement with experimental data. All optic
modes are identified and agreement of theory with experiment is excellent. The
static dielectric tensor is decomposed into contributions arising from
individual infrared-active phonon modes. It is found that high-frequency modes
mainly contribute to the lattice dielectric constant.Comment: 15pages, 1 figure, 5 table
Multilayered printed circuit boards inspected by X-ray laminography
Technique produces high resolution cross-sectional radiographs with close interplane spacing for inspecting multilayer boards to be used in providing circuitry routing and module structural support
Neutrino-induced deuteron disintegration experiment
Cross sections for the disintegration of the deuteron via neutral-current
(NCD) and charged-current (CCD) interactions with reactor antineutrinos are
measured to be 6.08 +/- 0.77 x 10^(-45) cm-sq and 9.83 +/- 2.04 x 10^(-45)
cm-sq per neutrino, respectively, in excellent agreement with current
calculations. Since the experimental NCD value depends upon the CCD value, if
we use the theoretical value for the CCD reaction, we obtain the improved value
of 5.98 +/- 0.54 x 10^(-45) for the NCD cross section. The neutral-current
reaction allows a unique measurement of the isovector-axial vector coupling
constant in the hadronic weak interaction (beta). In the standard model, this
constant is predicted to be exactly 1, independent of the Weinberg angle. We
measure a value of beta^2 = 1.01 +/- 0.16. Using the above improved value for
the NCD cross section, beta^2 becomes 0.99 +/- 0.10.Comment: 22pages, 9 figure
- …