24 research outputs found
Stem cells from human apical papilla decrease neuro-inflammation and stimulate oligodendrocyte progenitor differentiation via activin-A secretion
Secondary damage following spinal cord injury leads to non-reversible lesions and hampering of the reparative process. The local production of pro-inflammatory cytokines such as TNF-α can exacerbate these events. Oligodendrocyte death also occurs, followed by progressive demyelination leading to significant tissue degeneration. Dental stem cells from human apical papilla (SCAP) can be easily obtained at the removal of an adult immature tooth. This offers a minimally invasive approach to re-use this tissue as a source of stem cells, as compared to biopsying neural tissue from a patient with a spinal cord injury. We assessed the potential of SCAP to exert neuroprotective effects by investigating two possible modes of action: modulation of neuro-inflammation and oligodendrocyte progenitor cell (OPC) differentiation. SCAP were co-cultured with LPS-activated microglia, LPS-activated rat spinal cord organotypic sections (SCOS), and LPS-activated co-cultures of SCOS and spinal cord adult OPC. We showed for the first time that SCAP can induce a reduction of TNF-α expression and secretion in inflamed spinal cord tissues and can stimulate OPC differentiation via activin-A secretion. This work underlines the potential therapeutic benefits of SCAP for spinal cord injury repair
Injectable alginate hydrogel loaded with GDNF promotes functional recovery in a hemisection model of spinal cord injury
We hypothesized that local delivery of GDNF in spinal cord lesion via an injectable alginate hydrogel gelifying in situ would support spinal cord plasticity and functional recovery. The GDNF release from the hydrogel was slowed by GDNF encapsulation in microspheres compared to non-formulated GDNF (free GDNF). When injected in a rat spinal cord hemisection model, more neurofilaments were observed in the lesion when the rats were treated with free GDNF-loaded hydrogels. More growing neurites were detected in the tissues surrounding the lesion when the animals were treated with GDNF microsphere-loaded hydrogels. Intense GFAP (astrocytes), low III tubulin (neural cells) and RECA-1 (endothelial cells) stainings were observed for non-treated lesions while GDNF-treated spinal cords presented less GFAP staining and more endothelial and nerve fiber infiltration in the lesion site. The animals treated with free GDNF-loaded hydrogel presented superior functional recovery compared with the animals treated with the GDNF microsphere-loaded hydrogels and non-treated animals
Injection of SDF-1 loaded nanoparticles following traumatic brain injury stimulates neural stem cell recruitment.
Recruiting neural stem cell (NSC) at the lesion site is essential for central nervous system repair. This process could be triggered by the local delivery of the chemokine SDF-1. We compared two PLGA formulations for local brain SDF-1 delivery: SDF-1 loaded microspheres (MS) and SDF-1 loaded nanoparticles (NP). Both formulations were able to encapsulate more than 80% of SDF-1 but presented different release profiles, with 100% of SDF-1 released after 6days for the MS and with 25% of SDF-1 released after 2 weeks for NP. SDF-1 bioactivity was demonstrated by a chemotactic assay. When injected in mouse brain after traumatic brain injury, only SDF-1 nanoparticles induced NSC migration to the damage area. More neuroblasts (DCX+ cells) could be visualized around the lesions treated with NP SDF-1 compared to the other conditions. Rostral migratory stream destabilization with massive migration of DCX+ cell toward the perilesional area was observed 2 weeks after NP SDF-1 injection. Local injection of SDF-1-loaded nanoparticles induces recruitment of NSC and could be promising for brain injury lesion
Transport mechanisms of mmePEG750P(CL-co-TMC) polymeric micelles across the intestinal barrier.
Monomethylether poly(ethyleneglycol)(750)-poly(caprolactone-co-trimethylene carbonate) (mmePEG750)P(CL-co-TMC)) which spontaneously form micelles, can cross lipid bilayers via passive diffusion and demonstrate an oral bioavailability of 40% in rats. The aim of the current work was to study the transport mechanism(s) of drug-loaded mmePEG750P(CL-co-TMC) micelles across the intestinal barrier. The transport of radiolabelled polymer across Caco-2 cell monolayer was investigated by disrupting tight junctions and by inhibiting endocytosis. The polymer and drugs loaded in micelles independently crossed Caco-2 cell monolayers and did not use either the paracellular route or M-cells. The polymer did not affect P-gp pumps. This mechanistic study suggests that whereas drug-loaded micelles were absorbed by fluid-phase endocytosis, polymeric unimers diffused passively across the membrane concomitantly with micellar endocytosis
Stem cells from the dental apical papilla in extracellular matrix hydrogels mitigate inflammation of microglial cells
After spinal cord injury (SCI) chronic inflammation hampers regeneration. Influencing the local microenvironment after SCI may provide a strategy to modulate inflammation and the immune response. The objectives of this work were to determine whether bone or spinal cord derived ECM hydrogels can deliver human mesenchymal stem cells from the apical papilla (SCAP) to reduce local inflammation and provide a regenerative microenvironment. Bone hydrogels (8 and 10 mg/ml, B8 and B10) and spinal cord hydrogels (8 mg/ml, S8) supplemented with fibrin possessed a gelation rate and a storage modulus compatible with spinal cord implantation. S8 and B8 impact on the expression of anti and pro-inflammatory cytokines (Arg1, Nos2, Tnf) in LPS treated microglial cells were assessed using solubilised and solid hydrogel forms. S8 significantly reduced the Nos2/Arg1 ratio and solubilised B8 significantly reduced Tnf and increased Arg1 whereas solid S8 and B8 did not impact inflammation in microglial cells. SCAP incorporation within ECM hydrogels did not impact upon SCAP immunoregulatory properties, with significant downregulation of Nos2/Arg1 ratio observed for all SCAP embedded hydrogels. Tnf expression was reduced with SCAP embedded in B8, reflecting the gene expression observed with the innate hydrogel. Thus, ECM hydrogels are suitable vehicles to deliver SCAP due to their physical properties, preservation of SCAP viability and immunomodulatory capacity
3D-printed biodegradable gyroid scaffolds for tissue engineering applications
© 2018 Elsevier Ltd Fused deposition modeling (FDM), a low-cost and easy-to-use additive manufacturing technique, was used to produce poly(lactic acid) (PLA) gyroid scaffolds. Such morphology was selected for its spring shape, high porosity leading to good nutrient and waste diffusion, and favorable mechanical properties. Printing parameters were optimized and the need of a support material to improve printing was evidenced. The gyroid was compared to the common strut-based structure. Scaffold porosity was measured by micro-CT, and mechanical properties were determined by compression tests, taking into account the effect of geometry, printing resolution, and PLA crystallinity. The impact of scaffold geometry and crystallinity on its degradation was studied in vitro. Porosity of the gyroid structure was 71%, as expected from the printing model. The compression tests showed an isotropic behavior for the gyroid, in contrast with the strut-based scaffold. Upon aging in physiological conditions, gyroid scaffolds retained their integrity during 64 weeks, while control scaffolds lost struts starting from week 33, in a way that depended on crystallinity and printing resolution. Based on these results, the gyroid design is proposed as a suitable mesh architecture for tissue engineering scaffolds that can be elaborated using FDM techniques, to produce low-cost and personalized implants.status: publishe
Decreased viability and neurite length in neural cells treated with chitosan-dextran sulfate nanocomplexes.
CXCL12 is a chemokine known to regulate migration, proliferation, and differentiation of neural stem cells (NSCs) and to play a neuroprotective role in ischemic stroke. Chitosan-dextran sulfate nanocomplexes (Ch/DS NC) are known nanoparticulated systems used to efficiently deliver heparin-binding factors. Here we evaluate Ch/DS NC as carriers for CXCL12 in a mouse model of stroke. Free CXCL12 reduced the size of the ischemic brain lesion. However, when Ch/DS NC were administrated, the stroke volume increased. Neurotoxic screening revealed that Ch/DS NC reduced neuronal viability, decreased the extension of neurites and impaired NSC migration in vitro. To the best of our knowledge, neurotoxicity of Ch/DS NC has not been reported and further screenings will be needed in order to evaluate the biological safety of these nanocomposites. Our results add new data on nanoparticle neurotoxicity and may help us to better understand the complex interactions of the nanostructures with biological components
A human intestinal M-cell-like model for investigating particle, antigen and microorganism translocation
The specialized microfold cells (M cells) in the follicle-associated epithelium (FAE) of intestinal Peyer's patches serve as antigen-sampling cells of the intestinal innate immune system. Unlike 'classical' enterocytes, they are able to translocate diverse particulates without digesting them. They act as pathways for microorganism invasion and mediate food tolerance by transcellular transport of intestinal microbiota and antigens. Their ability to transcytose intact particles can be used to develop oral drug delivery and oral immunization strategies. This protocol describes a reproducible and versatile human M-cell-like in vitro model. This model can be exploited to evaluate M-cell transport of microparticles and nanoparticles for protein, drug or vaccine delivery and to study bacterial adherence and translocation across M cells. The inverted in vitro M-cell model consists of three main steps. First, Caco-2 cells are seeded at the apical side of the inserts. Second, the inserts are inverted and B lymphocytes are seeded at the basolateral side of the inserts. Third, the conversion to M cells is assessed. Although various M-cell culture systems exist, this model provides several advantages over the rest: (i) it is based on coculture with well-established differentiated human cell lines; (ii) it is reproducible under the conditions described herein; (iii) it can be easily mastered; and (iv) it does not require the isolation of primary cells or the use of animals. The protocol requires skills in cell culture and microscopy analysis. The model is obtained after 3 weeks, and transport experiments across the differentiated model can be carried out over periods of up to 10 h..European Commission - Seventh Framework Programme (FP7)Fonds National de la Recherche Scientifique (Belgium)Fonds de la Recherche Scientifique (Belgium
3D-printed biodegradable gyroid scaffolds for tissue engineering applications
Fused deposition modeling (FDM), a low-cost and easy-to-use additive manufacturing technique, was used to produce poly(lactic acid) (PLA) gyroid scaffolds. Such morphology was selected for its spring shape, high porosity leading to good nutrient and waste diffusion, and favorable mechanical properties. Printing parameters were optimized and the need of a support material to improve printing was evidenced. The gyroid was compared to the common strut-based structure. Scaffold porosity was measured by micro-CT, and mechanical properties were determined by compression tests, taking into account the effect of geometry, printing resolution, and PLA crystallinity. The impact of scaffold geometry and crystallinity on its degradation was studied in vitro. Porosity of the gyroid structure was 71%, as expected from the printing model. The compression tests showed an isotropic behavior for the gyroid, in contrast with the strut-based scaffold. Upon aging in physiological conditions, gyroid scaffolds retained their integrity during 64 weeks, while control scaffolds lost struts starting from week 33, in a way that depended on crystallinity and printing resolution. Based on these results, the gyroid design is proposed as a suitable mesh architecture for tissue engineering scaffolds that can be elaborated using FDM techniques, to produce low-cost and personalized implants