Magnetic domain wall propagation under ferroelectric control

Control of magnetic domain walls (DWs) and their propagation is among the most promising development directions for future information-storage devices. The well-established tools for such manipulation are the spin-torque transfer from electrical currents and strain. The focus of this paper is an alternative concept based on the nonvolatile ferroelectric field effect on DWs in a ferromagnet with carrier-mediated exchange coupling. The integrated ferromagnet/ferroelectric structure yields two superimposed ferroic patterns strongly coupled by an electric field. Using this coupling, we demonstrate an easy-to-form, stable, nondestructive, and electrically rewritable switch on magnetic domain wall propagation. DOI: 10.1103/PhysRevB.86.23513

FGFR3 expression in primary and metastatic urothelial carcinoma of the bladder

While fibroblast growth factor receptor 3 (FGFR3) is frequently mutated or overexpressed in nonmuscle-invasive urothelial carcinoma (UC), the prevalence of FGFR3 protein expression and mutation remains unknown in muscle-invasive disease. FGFR3 protein and mRNA expression, mutational status, and copy number variation were retrospectively analyzed in 231 patients with formalin-fixed paraffin-embedded primary UCs, 33 metastases, and 14 paired primary and metastatic tumors using the following methods: immunohistochemistry, NanoString nCounterTM, OncoMap or Affymetrix OncoScanTM array, and Gain and Loss of Analysis of DNA and Genomic Identification of Significant Targets in Cancer software. FGFR3 immunohistochemistry staining was present in 29% of primary UCs and 49% of metastases and did not impact overall survival (P = 0.89, primary tumors; P = 0.78, metastases). FGFR3 mutations were observed in 2% of primary tumors and 9% of metastases. Mutant tumors expressed higher levels of FGFR3 mRNA than wild-type tumors (P < 0.001). FGFR3 copy number gain and loss were rare events in primary and metastatic tumors (0.8% each; 3.0% and 12.3%, respectively). FGFR3 immunohistochemistry staining is present in one third of primary muscle-invasive UCs and half of metastases, while FGFR3 mutations and copy number changes are relatively uncommon

Micro-strip sensors based on CVD Diamond

In this article we present the performance of recent chemical vapour deposition (CVD) diamond micro-strip sensors in beam tests. In addition we present the first comparison of a CVD diamond micro-strip sensor before and after proton irradiation

Performance of irradiated CVD diamond micro-strip sensors

CVD diamond detectors are of interest for charged particle detection and tracking due to their high radiation tolerance. In this article we present, for the first time, beam test results from recently manufactured CVD diamond strip detectors and their behavior under low doses of electrons from a $\beta$-source and the performance before and after intense ($>10^{15}/{\rm cm^2}$) proton- and pion-irradiations. We find that low dose irradiations increase the signal-to-noise ratio (pumping of the signal) and slightly deteriorate the spatial resolution. Intense irradiations with protons ($2.2\times 10^{15}~p/{\rm cm^2}$) lowers the signal-to-noise ratio slightly. Intense irradiation with pions ($2.9\times 10^{15}~\pi/{\rm cm^2}$) lowers the signal-to-noise ratio more. The spatial resolution of the diamond sensors improves after irradiations

Proton irradiation of CVD diamond detectors for high-luminosity experiments at the LHC

CVD diamond shows promising properties for use as a position sensitive detector for experiments in the highest radiation areas at the Large Hadron Collider. In order to study the radiation hardn ess of diamond we exposed CVD diamond detector samples to 24~GeV/$c$ and 500~MeV protons up to a fluence of $5\times 10^{15}~p/{\rm cm^2}$. We measured the charge collection distance, the ave rage distance electron hole pairs move apart in an external electric field, and leakage currents before, during, and after irradiation. The charge collection distance remains unchanged up to $1\ times 10^{15}~p/{\rm cm^2}$ and decreases by $\approx$40~\% at $5\times 10^{15}~p/{\rm cm^2}$. Leakage currents of diamond samples were below 1~pA before and after irradiation. The particle indu ced currents during irradiation correlate well with the proton flux. In contrast to diamond, a silicon diode, which was irradiated for comparison, shows the known large increase in leakage curren t. We conclude that CVD diamond detectors are radiation hard to 24~GeV/$c$ and 500~MeV protons up to at least $1\times 10^{15}~p/{\rm cm^2}$ without signal loss

Development of CVD diamond radiation detectors

Diamond is a nearly ideal material for detecting ionizing radiation. Its outstanding radiation hardness, fast charge collection and low leakage current allow a diamond detector to be used in high ra diation, high temperature and in aggressive chemical media. We have constructed charged particle detectors using high quality CVD diamond. Characterization of the diamond samples and various detect ors are presented in terms of collection distance, $d=\mu E \tau$, the average distance electron-hole pairs move apart under the influence of an electric field, where $\mu$ is the sum of carrier mo bilities, $E$ is the applied electric field, and $\tau$ is the mobility weighted carrier lifetime. Over the last two years the collection distance increased from $\sim$ 75 $\mu$m to over 200 $\mu$ m. With this high quality CVD diamond a series of micro-strip and pixel particle detectors have been constructed. These devices were tested to determine their position resolution and signal to n oise performance. Diamond detectors were exposed to large fluences of pions, protons and neutrons to establish their radiation hardness properties. The results of these tests and their correlati on with the characterization studies are presented

Proton Irradiation of CVD Diamond Detectors for High Luminosity Experiments at the LHC

CVD diamond shows promising properties for use as a position sensitive detector for experiments in the highest radiation areas at the Large Hadron Collider. In order to study the radiation hardn ess of diamond we exposed CVD diamond detector samples to 24~GeV/$c$ and 500~MeV protons up to a fluence of $5\times 10^{15}~p/{\rm cm^2}$. We measured the charge collection distance, the ave rage distance electron hole pairs move apart in an external electric field, and leakage currents before, during, and after irradiation. The charge collection distance remains unchanged up to $1\ times 10^{15}~p/{\rm cm^2}$ and decreases by $\approx$40~\% at $5\times 10^{15}~p/{\rm cm^2}$. Leakage currents of diamond samples were below 1~pA before and after irradiation. The particle indu ced currents during irradiation correlate well with the proton flux. In contrast to diamond, a silicon diode, which was irradiated for comparison, shows the known large increase in leakage curren t. We conclude that CVD diamond detectors are radiation hard to 24~GeV/$c$ and 500~MeV protons up to at least $1\times 10^{15}~p/{\rm cm^2}$ without signal loss