Aspectos legais da morte

O presente trabalho pretende esclarecer e realçar os aspectos legais do evento morte para o médico, já que este, por atribuição normativa, e pelas circunstâncias fáticas e práticas, é quem, normalmente, a atesta em documento próprio. São enfocados os efeitos legais e jurídicos da morte, e sua repercussão no mundo do direito, com a importância e correlação que possui com a declaração médica da morte. Ao reavivar os conceitos, pretende-se que o médico esteja cada vez mais consciente do seu ato profissional enfocado no presente trabalho, e que seja, como sempre, diligente e zeloso com esta prática profissional pelas, dentre inúmeras outras coisas, repercussões que dela decorrem.The present work intends to clarify and to enhance the legal aspects of the death for the physician. Physicians, as a result of normative attribution, and of the practical circumstances, normally, certify the death in proper document. The legal consequences of the death are focused, with its importance and correlation with the medical declaration of the death. The physician must be more conscientious of his professional act, and, therefore, be more diligent and always zealous with his practices, because of its effects

Adhesion of Epiphany and AH Plus sealers to human root dentin treated with different solutions

This study evaluated comparatively the adhesion of Epiphany and AH Plus endodontic sealers to human root dentin treated with 1% NaOCl and 1% NaOCl+17% EDTA, using the push-out test. Sixty root cylinders obtained from maxillary canines had the canals prepared and were randomly assigned to 3 groups (n=20), according to root dentin treatment: GI - distilled water (control), GII - 1% NaOCl and GIII - 1% NaOCl+17% EDTA. Each group was divided into 2 subgroups (n=10) filled with either Epiphany or AH Plus. Bond strength push-out test data (kN) were obtained and analyzed statistically by ANOVA and Tukey&#39;s post-hoc test. There was statistically significant difference between sealers (AH Plus: 0.78 ± 0.13; Epiphany: 0.61 ± 0.19; p<0.01) and among root dentin treatments (distilled water: 0.58 ± 0.19; 1% NaOCl: 0.71 ± 0.12; 1% NaOCl+17% EDTA: 0.80 ± 0.17; p<0.05). In conclusion, AH Plus sealer presented greater adhesion to dentin than Epiphany, regardless of the treatment of root canal walls.O objetivo do presente estudo foi avaliar a adesividade do cimento Epiphany à dentina radicular previamente tratada com hipoclorito de sódio a 1% e EDTA a 17%, em comparação ao cimento AH Plus, pelo método do "push-out". Foram preparados sessenta cilindros de raízes de caninos superiores humanos que foram distribuídos em 3 grupos (n=20) de acordo com o tratamento da dentina: GI água destilada (controle), GII hipoclorito de sódio 1% e GIII EDTA 17 %. Esses grupos de corpos-de-prova foram distribuídos em 2 subgrupos para receber os cimentos obturadores a serem testados: Ephiphany e AH Plus. Foi realizado o teste do "push-out" e os resultados (em kN) foram analisados estatisticamente por ANOVA e o teste "post-hoc" de Tukey. A análise demonstrou diferença estatisticamente significativa entre os cimentos (AH Plus: 0,78 ± 0,13; Epiphany: 0,61 ± 0,19; p < 0,01) e entre as soluções testadas (água destilada: 0,58 ± 0,19; NaOCl: 0,71 ± 0,12; EDTA: 0,80 ± 0,17; p<0,05). Conclui-se que o cimento AH Plus apresentou valores de adesividade superiores aos obtidos pelo cimento Epiphany, independente do tratamento realizado nas paredes dos canais radiculares

Dentin permeability of the apical third in different groups of teeth

This ex vivo study evaluated dentin permeability of the root canal in the apical third of different human groups of teeth. Eighty teeth were used, 8 from each dental group: maxillary and mandibular central incisors, lateral incisors and canines, maxillary first premolars (buccal and palatal roots), mandibular first premolars, and maxillary and mandibular second premolars, totalizing 88 roots that were distributed in 11 groups. The root canals were instrumented, irrigated with 1% NaOCl and 15% EDTA. Roots were immersed in 10% copper sulfate for 30 min and then in 1% rubeanic acid alcohol solution for the same period; this chemical reaction reveals dentin permeability by the formation of copper rubeanate, which is a dark-colored compound. Semi-serial 100-µm-thick cross-sections were obtained from the apical third of the roots. Five sections of each apical third were washed, dehydrated, cleared and mounted on glass slides for examination under optical microscopy. The percentage of copper ion infiltration and the amount of tubular dentin were quantified by morphometric analysis. The penetration of copper ions in the apical third ranged from 4.60 to 16.66%. The mandibular central and lateral incisors presented the highest dentin permeability (16.66%), while the maxillary canines and mandibular second and first premolars presented the lowest dentin permeability (4.60%, 4.80% and 5.71%, respectively; p<0.001). The other teeth presented intermediate permeability. In conclusion, dye penetration into dentin tubules at the apical region is strongly dependent on the group of teeth evaluated.Este estudo ex vivo avaliou a permeabilidade da dentina do canal radicular do terço apical de diferentes grupos de dentes humanos. Foram utilizados 80 dentes, sendo 8 de cada grupo dental superior e inferior: incisivos centrais, incisivos laterais, caninos, primeiros pré-molares superiores (raízes vestibulares e palatinas), primeiros pré-molares inferiores, segundos pré-molares superiores e inferiores, totalizando 88 raízes, as quais foram distribuídas em 11 grupos. Os canais foram instrumentados, irrigados com NaOCl a 1% e EDTA a 15%. As raízes foram imersas em sulfato de cobre a 10% por 30 min e acido rubeânico a 1% pelo mesmo período. Esta reação química revela a permeabilidade da dentina por meio da formação de um complexo escurecido denominado rubeanato de cobre. Hemi-secções de 100 µm de espessura foram obtidas do terço apical da raiz. Cinco secções do terço apical foram lavadas, desidratadas, diafanizadas e montadas em lâminas para análise em microscopia óptica. A porcentagem de infiltração de íons cobre e a quantidade de dentina tubular foram quantificadas por meio de análise morfométrica. A penetração de íons cobre no terço apical da raiz variou de 4,60% a 16,66%. Os incisivos centrais e laterais apresentaram a maior permeabilidade dentinária (16,66%), e os caninos superiores e segundos e primeiros pré-molares inferiores as menores (4,60%, 4,80% e 5,71%, respectivamente; p<0,001). Os outros dentes apresentaram permeabilidade intermediaria. Conclui-se que a penetração de corante nos túbulos dentinários da região apical é extremamente dependente do grupo de dentes avaliado.Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES

Comparative effects of final canal irrigation with chitosan and EDTA

Chitosan is a natural, biocompatible chelating substance with potential for dental use. This study compared the effects of final canal irrigation with chitosan and EDTA on dentin microhardness, sealer dentin tubules penetration capacity, and push-out strength. Methodology: Fifty canine roots were distributed according to the final irrigation protocol (n=10): G1- 15% EDTA with conventional irrigation; G2- 15% EDTA with Endovac; G3- 0.2% chitosan with conventional irrigation; G4- 0.2% chitosan with Endovac; and G5- without irrigation. Specimens were obturated (AH Plus) and sectioned in 3 slices per root third. The first slice was used for microhardness and sealer penetration assessments under a laser confocal microscope. The second was utilized in a push-out strength test. The third slice was discarded. Data were analyzed using 2-way ANOVA and Tukey's post hoc test (α&lt;0.05). Failure mode was determined at x40 magnification. Results: Microhardness reduction was more significant in groups G2 and G4 (p&lt;0.05). Sealer penetration through dentin was significantly greater in group G2 (p&lt;0.05). There was no significant difference between groups G1, G3, and G4 (p&gt;0.05). In general, all experimental groups presented similar bond resistance (p&gt;0.05) that significantly differed from the control (p&lt;0.001). Mixed type failures were predominant. Conclusions: In general, 0.2% chitosan and 15% EDTA solutions act in a similar manner with regard to the variables studied. The use of Endovac potentiates the effect of these solutions

Adhesion of an endodontic sealer to dentin and gutta-percha: shear and push-out bond strength measurements and SEM analysis

The use of an adequate method for evaluation of the adhesion of root canal filling materials provides more reliable results to allow comparison of the materials and substantiate their clinical choice. The aims of this study were to compare the shear bond strength (SBS) test and push-out test for evaluation of the adhesion of an epoxy-based endodontic sealer (AH Plus) to dentin and gutta-percha, and to assess the failure modes on the debonded surfaces by means of scanning electron microscopy (SEM). Three groups were established (n=7): in group 1, root cylinders obtained from human canines were embedded in acrylic resin and had their canals prepared and filled with sealer; in group 2, longitudinal sections of dentin cylinders were embedded in resin with the canal surface smoothed and turned upwards; in group 3, gutta-percha cylinders were embedded in resin. Polyethylene tubes filled with sealer were positioned on the polished surface of the specimens (groups 2 and 3). The push-out test (group 1) and the SBS test (groups 2 and 3) were performed in an Instron universal testing machine running at crosshead speed of 1 mm/min. Means (±SD) in MPa were: G1 (8.8±1.13), G2 (5.9±1.05) and G3 (3.8±0.55). Statistical analysis by ANOVA and Student's t-test (a=0.05) revealed statistically significant differences (p<0.01) among the groups. SEM analysis showed a predominance of adhesive and mixed failures of AH Plus sealer. The tested surface affected significantly the results with the sealer reaching higher bond strength to dentin than to gutta-percha with the SBS test. The comparison of the employed methodologies showed that the SBS test produced significantly lower bond strength values than the push-out test, was skilful in determining the adhesion of AH Plus sealer to dentin and gutta-percha, and required specimens that could be easily prepared for SEM, presenting as a viable alternative for further experiments

Influência do preparo cervical na determinação da lima anatômica inicial de raízes palatinas de molares superiores

PURPOSE: The aim of this study was to investigate the influence of cervical preflaring in determining the initial apical file (IAF) in the palatal roots of maxillary molars, and to determine the morphologic shape of the canal 1 mm short of the apex. METHODS: After preparing standard access cavities the group 1 received the IAF without cervical preflaring (WCP). In groups 2 to 5, preflaring was performed with Gates-Glidden (GG), Anatomic Endodontics Technology (AET), GT Rotary Files (GT) and LA Axxes (LA), respectively. Each canal was sized using manual K-files, starting with size 08 files, and making passive movements until the WL was reached. File sizes were increased until a binding sensation was felt at the WL. The IAF area and the area of the root canal were measured to verify the percentage occupied by the IAF inside the canal in each sample by SEM. The morphologic shape of the root canal was classified as circular, oval or flattened. Statistical analysis was performed by ANOVA/Tukey test (P < 0.05). RESULTS: The decreasing percentages occupied by the IAF inside the canal were: LA&gt;GT=AET&gt;GG&gt;WCP. The morphologic shape was predominantly oval. CONCLUSION: The type of cervical preflaring used interferes in the determination of IAF

Influência do preparo cervical na determinação da lima anatômica inicial de raízes palatinas de molares superiores

PURPOSE: The aim of this study was to investigate the influence of cervical preflaring in determining the initial apical file (IAF) in the palatal roots of maxillary molars, and to determine the morphologic shape of the canal 1 mm short of the apex. METHODS: After preparing standard access cavities the group 1 received the IAF without cervical preflaring (WCP). In groups 2 to 5, preflaring was performed with Gates-Glidden (GG), Anatomic Endodontics Technology (AET), GT Rotary Files (GT) and LA Axxes (LA), respectively. Each canal was sized using manual K-files, starting with size 08 files, and making passive movements until the WL was reached. File sizes were increased until a binding sensation was felt at the WL. The IAF area and the area of the root canal were measured to verify the percentage occupied by the IAF inside the canal in each sample by SEM. The morphologic shape of the root canal was classified as circular, oval or flattened. Statistical analysis was performed by ANOVA/Tukey test (P < 0.05). RESULTS: The decreasing percentages occupied by the IAF inside the canal were: LA&gt;GT=AET&gt;GG&gt;WCP. The morphologic shape was predominantly oval. CONCLUSION: The type of cervical preflaring used interferes in the determination of IAF

Aspectos legais da morte

The present work intends to clarify and to enhance the legal aspects of the death for the physician. Physicians, as a result of normative attribution, and of the practical circumstances, normally, certify the death in proper document. The legal consequences of the death are focused, with its importance and correlation with the medical declaration of the death. The physician must be more conscientious of his professional act, and, therefore, be more diligent and always zealous with his practices, because of its effects