A Fully Nonmetallic Gas Turbine Engine Enabled by Additive Manufacturing, Part II: Additive Manufacturing and Characterization of Polymer Composites

This publication is the second part of the three part report of the project entitled "A Fully Nonmetallic Gas Turbine Engine Enabled by Additive Manufacturing" funded by NASA Aeronautics Research Institute (NARI). The objective of this project was to conduct additive manufacturing to produce aircraft engine components by Fused Deposition Modeling (FDM), using commercially available polyetherimides-Ultem 9085 and experimental Ultem 1000 mixed with 10% chopped carbon fiber. A property comparison between FDM-printed and injection molded coupons for Ultem 9085, Ultem 1000 resin and the fiber-filled composite Ultem 1000 was carried out. Furthermore, an acoustic liner was printed from Ultem 9085 simulating conventional honeycomb structured liners and tested in a wind tunnel. Composite compressor inlet guide vanes were also printed using fiber-filled Ultem 1000 filaments and tested in a cascade rig. The fiber-filled Ultem 1000 filaments and composite vanes were characterized by scanning electron microscope (SEM) and acid digestion to determine the porosity of FDM-printed articles which ranged from 25 to 31%. Coupons of Ultem 9085, experimental Ultem 1000 composites and XH6050 resin were tested at room temperature and 400F to evaluate their corresponding mechanical properties. A preliminary modeling was also initiated to predict the mechanical properties of FDM-printed Ultem 9085 coupons in relation to varied raster angles and void contents, using the GRC-developed MAC/GMC program

Inferring gene regression networks with model trees

<p>Abstract</p> <p>Background</p> <p>Novel strategies are required in order to handle the huge amount of data produced by microarray technologies. To infer gene regulatory networks, the first step is to find direct regulatory relationships between genes building the so-called gene co-expression networks. They are typically generated using correlation statistics as pairwise similarity measures. Correlation-based methods are very useful in order to determine whether two genes have a strong global similarity but do not detect local similarities.</p> <p>Results</p> <p>We propose model trees as a method to identify gene interaction networks. While correlation-based methods analyze each pair of genes, in our approach we generate a single regression tree for each gene from the remaining genes. Finally, a graph from all the relationships among output and input genes is built taking into account whether the pair of genes is statistically significant. For this reason we apply a statistical procedure to control the false discovery rate. The performance of our approach, named R<smcaps>EG</smcaps>N<smcaps>ET</smcaps>, is experimentally tested on two well-known data sets: <it>Saccharomyces Cerevisiae </it>and E.coli data set. First, the biological coherence of the results are tested. Second the E.coli transcriptional network (in the Regulon database) is used as control to compare the results to that of a correlation-based method. This experiment shows that R<smcaps>EG</smcaps>N<smcaps>ET</smcaps> performs more accurately at detecting true gene associations than the Pearson and Spearman zeroth and first-order correlation-based methods.</p> <p>Conclusions</p> <p>R<smcaps>EG</smcaps>N<smcaps>ET</smcaps> generates gene association networks from gene expression data, and differs from correlation-based methods in that the relationship between one gene and others is calculated simultaneously. Model trees are very useful techniques to estimate the numerical values for the target genes by linear regression functions. They are very often more precise than linear regression models because they can add just different linear regressions to separate areas of the search space favoring to infer localized similarities over a more global similarity. Furthermore, experimental results show the good performance of R<smcaps>EG</smcaps>N<smcaps>ET</smcaps>.</p

Review of the projected impacts of climate change on coastal fishes in southern Africa

The coastal zone represents one of the most economically and ecologically important ecosystems on the planet, none more so than in southern Africa. This manuscript examines the potential impacts of climate change on the coastal fishes in southern Africa and provides some of the first information for the Southern Hemisphere, outside of Australasia. It begins by describing the coastal zone in terms of its physical characteristics, climate, fish biodiversity and fisheries. The region is divided into seven biogeographical zones based on previous descriptions and interpretations by the authors. A global review of the impacts of climate change on coastal zones is then applied to make qualitative predictions on the likely impacts of climate change on migratory, resident, estuarine-dependent and catadromous fishes in each of these biogeographical zones. In many respects the southern African region represents a microcosm of climate change variability and of coastal habitats. Based on the broad range of climate change impacts and life history styles of coastal fishes, the predicted impacts on fishes will be diverse. If anything, this review reveals our lack of fundamental knowledge in this field, in particular in southern Africa. Several research priorities, including the need for process-based fundamental research programs are highlighted

Achieving quality in customer-configurable products

Customers of products that include or are determined by software nowadays expect the product to be individually configurable. At the same time high quality and short delivery times are expected. As a consequence the producer of the software must be able to develop systems that can be easily configured according to the customer's needs in such a way that each individually configured system satisfies all quality requirements. Especially in the case of high numbers of possible configurations it is obvious that it is not feasible to construct all system configurations and check the properties of each of them. Rather, there must be means to assure quality generically, that means, once and for all configurations at the same time. The chapter considers software product line engineering as the base technology how to construct configurable systems and adds generic quality assurance means to this process. The mechanism can be understood as a general pattern how to carry over quality assurance techniques to configurable systems. For two concrete techniques this is done in the chapter: model-based testing as technique for the assurance of functional quality and model-based deployment as a technique for the assurance of real-time properties like responsiveness, availability, and reliability. The techniques are demonstrated at the example of a configurable flight management system as used in modern airplanes