Energy Abundance, Trade and Industry Location

We study the effect of countries’ energy abundance on trade and sector activity, conditional on sector’s energy intensity, using an unbalanced panel with 14 high-income countries from Europe, America and Asia, 10 broad sectors, and years 1970-1997. We find that (i) countries with large energy endowments have low energy prices, and are thus energy abundant both on micro and macro level. (ii) Energy abundant countries have a high level of energy embodied in exports relative to imports. (iii) Energy intensive sectors export from and (iv) have higher economic activity in energy abundant countries. (v) The trade and location effects increase with a sector’s exposure to international trade. In short, energy is a major driver for sector location through specialisation. We show that capital and energy are complements in the production function and use various controls in our analysis. The results give insights into delocalisation effects that may take place among rich countries with heterogeneous energy policy.Trade and the Environment, Pollution Haven, Factor Endowments, Industry Location

Quasi-2D Flows of \u3csup\u3e3\u3c/sup\u3eHe-\u3csup\u3e4\u3c/sup\u3eHe Mixtures

Transport in degenerate 3He- 4He mixtures in quasi-2D flow channels is discussed. The quasiparticle mean free path combines particle-wall and particle-particle collisions including the interference between them. The temperature, concentration, and polarization dependences of the transport coefficients allow easy extraction of the correlation parameters of random surface roughness from transport data

Microseismic Mapping of the Aftershock Sequences Following the Magnitude 5.8 Lincoln, MT Earthquake

Regional seismic stations are distributed sparsely throughout Montana. The thin dispersion of stations inhibits the evaluation of aftershock evolutions following a larger earthquake, as well as hinders the ability to record low magnitude events. To account for these limitations, a dense concentration of seismic stations from the University of Montana, Montana Bureau of Mines and Geology, and the USGS were specifically deployed around the area of the 2017 Lincoln, MT earthquake. With a magnitude of 5.8, this event was one of the largest earthquakes in Montana’s history. In years following the mainshock, a sequence of aftershocks have occurred along adjacent faults subparallel to the mainshock. I hypothesize that many of these events went unnoticed, because their magnitudes were too low for distant seismic stations to detect them. The absence of these events in current catalogs may lead to misinterpretations or incomplete interpretations of the fault mechanics, geometry, and behavior of active faults in west-central Montana, as well as conceal evidence of re-activated faults, or faults not mapped due to a lack of surficial evidence. To accomplish this objective, the continuous seismic data that was collected by these stations will be processed through a software called QuakeMigrate (QM). QM will siphon through the recorded events, determine which events are likely to be real earthquakes, based on a series of user specified parameters, and output the approximate epicenter, depth, magnitude, and degree of uncertainty for each event. Further analysis of this data will provide input for determining the spatial and temporal patterns of aftershocks, the type of deformation associated with each event, and provide evidence that supports or refutes the current understanding of the underlying mechanics in west-central Montana

Capstone Teams: An Industry Based Model

Project teams, a mainstay in industry practice, are being employed in many capstone design courses. This paper examines industry models for teams and their application to a specific capstone design course. Following Katzenbach and Smith’s basics of high performing teams, teams are formed based on individuals skills. The team is made accountable and committed both as a group and as individuals through the structure and format of the course. The course structure is then planned so that teams progress through Tuckman’s development stages of forming, storming, norming and performing, during their two semester capstone design project

Embedding Principal Component Analysis for Data Reductionin Structural Health Monitoring on Low-Cost IoT Gateways

Principal component analysis (PCA) is a powerful data reductionmethod for Structural Health Monitoring. However, its computa-tional cost and data memory footprint pose a significant challengewhen PCA has to run on limited capability embedded platformsin low-cost IoT gateways. This paper presents a memory-efficientparallel implementation of the streaming History PCA algorithm.On our dataset, it achieves 10x compression factor and 59x memoryreduction with less than 0.15 dB degradation in the reconstructedsignal-to-noise ratio (RSNR) compared to standard PCA. More-over, the algorithm benefits from parallelization on multiple cores,achieving a maximum speedup of 4.8x on Samsung ARTIK 710

Relationships between food resources, foraging patterns, and reproductive success in the water pipit, Anthus sp. spinoletta

A basic but rarely tested assumption in optimal foraging theory is that positive relationships exist between the foraging pattern of an animal, its short-term benefits in feeding, and its long-term fitness. We present evidence for these relationships for a central place foraging situation. We studied the foraging behavior of adult water pipits (Anthus sp. spinoletta) feeding nestlings in an Alpine habitat near Davos, Switzerland, with the following results: (1) searching effort decreases with increasing distance from the nest, (2) the amount of prey and the proportion of large items brought to the nest increases with increasing foraging distance, (3) water pipits do not forage according to habitat availability, but prefer vegetation types with the highest food density (mainly grass and herbs) and avoid those with the lowest, and (4) this selectivity is only expressed when the birds forage more than 50 m from the nest, i.e., usually outside the territory. Among the several potential interpretations of these results, the most parsimonious is that foraging decisions are based on profitability, i.e., on the net energy gain per time unit. Additionally, we found that food conditions translate into fitness: the number of fledglings per nest is related positively to the average prey biomass at the foraging place and negatively to the average distance between the foraging place and the nest. Maximum economic distances, which were predicted from this food-fitness relationship, agreed well with the actual foraging distances observed. This suggests a dose connection between foraging decisions and fitness. In addition to the theoretical issues, some conservation issues are also briefly discusse

Genome-wide landscape of runs of homozygosity and differentiation across Egyptian goat breeds

: Understanding the genomic features of livestock is essential for successful breeding programs and conservation. This information is scarce for local goat breeds in Egypt. In the current study, genomic regions with selection signatures were identified as well as runs of homozygosity (ROH), genomic inbreeding coefficients (FROH) and fixation index (FST) were detected in Egyptian Nubian, Damascus, Barki and Boer goat breeds. A total of 46,268 SNP markers and 337 animals were available for the genomic analyses. On average, 145.44, 42.02, 87.90 and 126.95 ROHs were detected per individual in the autosomal genome of the respective breeds. The mean accumulative ROH lengths ranged from 46.5 Mb in Damascus to 360 Mb in Egyptian Nubian. The short ROH segments (< 2 Mb) were most frequent in all breeds, while the longest ROH segments (> 16 Mb) were exclusively found in the Egyptian Nubian. The highest average FROH was observed in Egyptian Nubian (~ 0.12) followed by Boer (~ 0.11), while the lowest FROH was found in Damascus (~ 0.05) and Barki breed (~ 0.03). The estimated mean FST was 0.14 (Egyptian Nubian and Boer), 0.077 (Egyptian Nubian and Barki), 0.075 (Egyptian Nubian and Damascus), 0.071 (Barki and Boer), 0.064 (Damascus and Boer), and 0.015 (Damascus and Barki), for each pair of breeds. Interestingly, multiple SNPs that accounted for high FST values were observed on chromosome 6 in regions harboring ALPK1 and KCNIP4. Genomic regions overlapping both FST and ROH harbor genes related to immunity (IL4R, PHF23, GABARAP, GPS2, and CD68), reproduction (SPATA2L, TNFSF12, TMEM95, and RNF17), embryonic development (TCF25 and SOX15) and adaptation (MC1R, KDR, and KIT), suggesting potential genetic adaptations to local environmental conditions. Our results contribute to the understanding of the genetic architecture of different goat breeds and may provide valuable information for effective preservation and breeding programs of local goat breeds in Egypt

Variation in fertilisation abilities between hemiclonal hybrid and sexual parental males of sympatric water frogs (Rana lessonae, R. esculenta, R. ridibunda)

In many species, males and females mate with multiple partners, which gives rise to sperm competition and multiple paternity. The experiments on water frogs presented here demonstrate that such sperm competition can affect the structure and dynamics of mixed species communities. The hybrid frog Rana esculenta (LR) mates with one of its parental species, usually Rana lessonae (LL) although in some areas R. ridibunda (RR), to regain the premeiotically eliminated parental genome ("hybridogenesis"). Mixed LL/LR-populations are stable although hybrid numbers should continuously increase at the expense of parental animals, because of differences in female fecundity and other factors. This would finally lead to the extinction of the sexual host, followed by that of the sexual parasite, unless the reproductive superiority of R. esculenta is reduced by other factors, such as lower hybrid male fertility. Eggs from LL- and LR-females were fertilised in vitro by single- and multi-male sperm suspensions of LL-, LR- and RR-males. In all experiments, the proportion of offspring sired by R. esculenta sperm was significantly lower than that sired by R. lessonae or R. ridibunda sperm. Gonad mass, sperm morphology, sperm swimming velocity, and sperm survival did not explain these differences in fertilisation success, nor did gamete recognition and compatibility. Sperm density was the only trait that paralleled fertilisation success; but it offers no explanation either, because densities were equalised for the in vitro fertilisations. In natural LL/LR populations, the significantly smaller amount, poorer competitive ability and lower long-term survival of R. esculenta compared to R. lessonae sperm will reduce the initial reproductive superiority of hybrids and contribute to the stabilisation of mixed water frog populations. Differences in fertilisation ability are also likely to be relevant for the structure and dynamics of several other systems with encounters between eggs and sperm from different genotypes, ecotypes, ploidy levels and/or species