Impact of the application of monosilicic acid to grapevine (Vitis vinifera L.) on the chemical composition of young red Mencia wines

Impact of applying monosilicic acid to grapevines during ripening on chemical composition of Mencía red wines in an area where fungal diseases during summer are common was examined. The foliar application of monosilicic acid to grapevines led to a less oxidized wine, with lower levels of acetic acid, acetaldehyde, ethyl acetate and diacethyl; this should be considered as positive from a sensory point of view. Wines made with silicon-treated grapes also contained lower levels of gluconic acid and glycerol, which are chemical markers of wines made with botrytized grapes, as well as higher contents of total phenols, anthocyanins and tannins. Furthermore, the contents of several mid-chain alcohols were higher (p < 0.05) in wines made with grapes from silicon-treated plantsThe authors gratefully acknowledge the financial support by the FEDER/Spanish Ministry of Science, Innovation, and Universities Project: RTI2018-096268-B-I00. This work was partially supported by Comunidad de Madrid (Spain) and Structural Funds 2014–2020 (ERDF and ESF) (Project AGRISOST-CM S2018/BAA-4330

Unraveling the Historical Economies of Scale and Learning Effects for Desalination Technologies

As a technology develops and matures, both economies of scale and the lessons learned through experience drive down the cost over time. This article analyzes and separates the effects of economies of scale and learning through experience on historical cost reductions for three mature desalination technologies: multi‐effect distillation (MED), multi‐stage flash (MSF) distillation, and reverse osmosis (RO). The analysis suggests that learning has been the dominant driver for cost reductions, with learning rates of 23%, 30%, and 12% for MED, MSF, and RO, respectively, when the effects of scale are removed. The highest influence of economies of scale is found for MED, with an exponential scale coefficient of 0.71 and the largest difference between a traditional or scale‐free estimation of the learning rate. MSF and RO showed smaller differences between the traditional and de‐scaled learning rates (only 3%), pointing at learning as the main factor driving their historical cost reductions. However, a trend break observed over the last 10 years mirrors an exhaustion of the potential for technical improvements, as well as an increasing complexity and nonlinearity of the factors influencing the systems' cost. The findings provide useful data and insights for integrated and economic modeling frameworks, while providing guidance to prevent overestimations of the learning effect due to the confounding influence of economies of scale effects associated to historical unit upscaling processes

Effects of Livestock Grazing on the Shrub Vegetation Biomass in the ‘Sierra de Guara’ Natural Park (Spain)

The \u27Sierra de Guara\u27 Natural Park (80.7 Kha) is a Mediterranean mountain area in Huesca, south of the Spanish Pyrenees. Shrub and forest pastures dominate the Park. They are grazed mainly by sheep, but also by suckler cattle and goats. Average stocking rate is 0.15 LU/ha. As in other European mountain areas, agricultural activities have declined during the last few decades. This has caused a process of secondary vegetation succession towards shrub invasion, with consequent landscape changes. This study aimed to quantify the effect of grazing on shrub vegetation biomass

Increasing fibre in white flour and bread: Implications for health and processing

Dietary fibre is beneficial for human health, but dietary intakes are below recommended levels in most countries. Cereals are the major source of dietary fibre in Western diets, with bread providing about 20% of the daily intake in the United Kingdom. Despite the promotion of fibre-rich wholegrain products, white bread (which has a lower fibre content) remains dominant in many countries due to cultural preferences. Increasing the fibre content of white bread and other products made from white flour is therefore an attractive strategy for increasing fibre intake. This can be achieved by exploiting genetic variation in wheat without major effects on the processing quality or the consumer acceptability of products. Modelling data for food consumption in the United Kingdom shows that increasing the fibre content of white flour by 50% (from about 4% to 6% dry weight) and in wholegrain by 20% will increase total fibre intake by 1.04g/day and 1.41g/day in adult females and males, respectively. Furthermore, in vitro studies indicate that the increased fibre content of white bread should reduce the rate of starch digestion and glucose release in the human gastrointestinal tract

Actores sociales: problemática y contribución al desarrollo regional. El papel de las ONG de desarrollo en su propia sociedad

El documento analiza la importancia de las organizaciones no gubernamentales al interior de sus propias sociedades; cuestiona el impacto de su capacidad para sensibilizar y ser agentes de cambio; analiza los elementos que influyen en que este objetivo pueda lograre y cuáles lo dificultan

Effect of Thermal Treatment on Corrosion Behavior of AISI 316L Stainless Steel Manufactured by Laser Powder Bed Fusion

The effect of post-processing heat treatment on the corrosion behavior of AISI 316L stainless steel manufactured by laser powder bed fusion (L-PBF) is investigated in this work. Produced stainless steel was heat treated in a broad temperature range (from 200 °C to 1100 °C) in order to evaluate the electrochemical behavior and morphology of corrosion. The electrochemical behavior was investigated by potentiodynamic and galvanostatic polarization in a neutral and acidic (pH 1.8) 3.5% NaCl solution. The microstructure modification after heat treatment and the morphology of attack of corroded samples were evaluated by optical and scanning electron microscopy. The fine cellular/columnar microstructure typically observed for additive-manufactured stainless steel evolves into a fine equiaxed austenitic structure after thermal treatment at high temperatures (above 800 °C). The post-processing thermal treatment does not negatively affect the electrochemical behavior of additive-manufactured stainless steel even after prolonged heat treatment at 1100 °C for 8 h and 24 h. This indicates that the excellent barrier properties of the native oxide film are retained after heat treatment

Waist Circumference, Body Mass Index, and Other Measures of Adiposity in Predicting Cardiovascular Disease Risk Factors among Peruvian Adults

Objectives. To examine the extent to which measures of adiposity can be used to predict selected components of metabolic syndrome (MetS) and elevated C-reactive protein (CRP). Methods. A total of 1,518 Peruvian adults were included in this study. Waist circumference (WC), body mass index (BMI), waist-hip ratio (WHR), waist-height ratio (WHtR), and visceral adiposity index (VAI) were examined. The prevalence of each MetS component was determined according to tertiles of each anthropometric measure. ROC curves were used to evaluate the extent to which measures of adiposity can predict cardiovascular risk. Results. All measures of adiposity had the strongest correlation with triglyceride concentrations (TG). For both genders, as adiposity increased, the prevalence of Mets components increased. Compared to individuals with low-BMI and low-WC, men and women with high-BMI and high- WC had higher odds of elevated fasting glucose, blood pressure, TG, and reduced HDL, while only men in this category had higher odds of elevated CRP. Overall, the ROCs showed VAI, WC, and WHtR to be the best predictors for individual MetS components. Conclusions. The results of our study showed that measures of adiposity are correlated with cardiovascular risk although no single adiposity measure was identified as the best predictor for MetS

A cautionary note on methods of comparing programmatic efficiency between two or more groups of DMUs in data envelopment analysis

In some applications of data envelopment analysis (DEA) there may be doubt as to whether all the DMUs form a single group with a common efficiency distribution. The Mann-Whitney rank statistic has been used to evaluate if two groups of DMUs come from a common efficiency distribution under the assumption of them sharing a common frontier and to test if the two groups have a common frontier. These procedures have subsequently been extended using the Kruskal-Wallis rank statistic to consider more than two groups. This technical note identifies problems with the second of these applications of both the Mann-Whitney and Kruskal-Wallis rank statistics. It also considers possible alternative methods of testing if groups have a common frontier, and the difficulties of disaggregating managerial and programmatic efficiency within a non-parametric framework. © 2007 Springer Science+Business Media, LLC

Outcome of cutaneous squamous cell carcinoma with microscopic residual disease after surgery and usefulness of postoperative radiotherapy: a retrospective cohort study

[Background]: Microscopic residual disease (MRD) after surgery can be a challenging situation in cutaneous squamous cell carcinoma (CSCC) and there is a lack of evidence concerning its management. [Objective]: To evaluate the prognosis of CSCC with MRD and the usefulness of postoperative radiotherapy (PORT) in CSCC with MRD. [Methods]: Retrospective cohort study of CSCC with MRD through a 10-year period (2010–2019) (n = 244). Disease-free survival and event-free survival were assessed using R (v.3.4.1), considering competing risks. Evaluated outcomes were local recurrence (LR), nodal metastases (NMs), and disease-specific death (DSD). [Results]: Median age was 88y (IQR: 10.5). A total of 145 (59.43%) were men and 69 (28.28%) were immunosuppressed. Median tumour diameter and thickness were 19 and 6.4 mm (IQR 11 and 5.5 mm). Patients treated by re-excision had a relapse rate of 4.3% compared with 11.30% and 29.71% in those who received PORT and observation (P = 0.045). The use of PORT was associated with a lower risk of LR compared with observation (HR = 0.206 [0.049–0.859], P = 0.030), but not with a lower risk of NMs or DSDs. In the multivariable models, PORT was again associated with a lower risk of LR than observation (HR = 0.167 [0.039–0.708], P = 0.014), but not with lower risk of metastasis and death. [Conclusions]: We always should try to obtain clear margins after surgery. PORT improves local control in CSCC with MRD, but when administered to the tumour bed, it does not reduce the risk of NM and DSD.Javier Cañueto is partially supported by the grants GRS2139/A/20 (Gerencia Regional de Salud de Castilla y León), PI18/00587 and PI21/01207 (Instituto de Salud Carlos III, confanciado con fondos FEDER) and by the ‘Programa de Intensificación of the ISCIII’, grant number INT20/00074

High-resolution melting assay for genotyping variants of the CYP2C19 enzyme and predicting voriconazole effectiveness

Voriconazole is a triazole antifungal agent recommended as primary treatment for invasive aspergillosis, as well as some other mold infections. However, it presents some pharmacokinetic singularities that lead to a great variability intra- and interindividually, nonlinear pharmacokinetics, and a narrow therapeutic range. Most experts have recommended tracing the levels of voriconazole in patients when receiving treatment. This azole is metabolized through the hepatic enzyme complex cytochrome P450 (CYPP450), with the isoenzyme CYP2C19 being principally involved. Allelic variations (polymorphisms) of the gene that encodes this enzyme are known to contribute to variability in voriconazole exposure. Three different allelic variants, CYP2C19*17, CYP2C19*2, and CYP2C19*3, could explain most of the phenotypes related to the voriconazole metabolism and some of its pharmacokinetic singularities. We designed a rapid molecular method based on high-resolution melting to characterize these polymorphisms in a total of 142 samples, avoiding sequencing. Three PCRs were designed with similar cycling conditions to run simultaneously. The results showed that our method represents a fast, accurate, and inexpensive means to study these variants related to voriconazole metabolism. In clinical practice, this could offer a useful tool to individually optimize therapy and reduce expenses in patients with fungal infections.National Institute of Health Carlos III (AES13PI13/01817Research Project MPY 1367/13). L.B.-M. has a contract supported by theMinisterio de Ciencia e Innovación, Instituto de Salud Carlos III, cofinanced by the EuropeanDevelopment Regional Fund (EDRF) “A Way to Achieve Europe” and the SpanishNetwork for the Research in Infectious Diseases (REIPI; RD12/0015/0015). B.M.-R. is astudent in the Master’s Program entitled “Microbiología Aplicada a la Salud Pública eInvestigación en Enfermedades Infecciosas,” Alcalá de Henares University, Madrid,Spain. A.C. and C.C. were supported by the Northern Portugal Regional OperationalProgram (NORTE 2020) under the Portugal 2020 Partnership Agreement through theEuropean Regional Development Fund (FEDER; NORTE-01-0145-FEDER-000013) and theFundação Para a Ciência e Tecnologia (FCT; IF/00735/2014 [A.C.] and SFRH/BPD/96176/2013 [C.C.])