DLI-CVD of TiO2–Cu antibacterial thin films: Growth and characterization

TiO2–Cu nanocomposite films were grown by pulsed direct liquid injection chemical vapor deposition (DLICVD) on stainless steel, silicon and glass substrates with the goal to produce bactericidal surfaces. Copper bis (2,2,6,6-tetramethyl-3,5-heptadionate), Cu(TMHD)2, and titanium tetra-iso-propoxide, TTIP, were used as metalorganic precursors. Liquid solutions of these compounds in xylene were injected in a flash vaporization chamber connected to a cold wall MOCVD reactor. The deposition temperature was typically 683 K and the total pressure was 800 Pa. The copper content of the layers was controlled by the mole fraction of Cu (TMHD)2 which was adjusted by the injection parameters (injection frequency and concentration of the starting solution). The chemical, structural and physical characteristics of the films were investigated by XRD, XPS, FEG-SEM and TEM. Copper is incorporated as metal particles with a relatively large size distribution ranging from 20 to 400 nm (with a large majority in 20–100 nm) depending on the copper content of the films. The influence of the growth conditions on the structural features and the antibacterial properties of the thin films are reported and discussed

Comparative study of antibacterial efficiency of M-TiO2 (M = Ag, Cu) thin films grown by CVD

M-TiO2 (M = Ag, Cu) nanocomposite layers were grown by pulsed direct liquid injection chemical vapor deposition (DLICVD) on various substrates to produce bactericidal surfaces with long term activity. Monodisperse Ag nanoparticles (NPs) with an average size of 5-10 nm are embedded in an anatase matrix. A bactericidal behavior determined by the JIS Z 2801 standard test was found for Ag-TiO2 films for Ag ≤ 1 at. % and above. Higher Ag content is not necessary since efficiency is already at its maximum (relative activity 100%). By contrast, using Cu as antibacterial agent, a larger size distribution of metal particles was found (20 to 400 nm). Cu-TiO2 films exhibit a bactericidal behavior if their thickness is higher than 100 nm and Cu content ≥ 3.5 at. %. These coatings are still antibacterial after 5 months of aging and their efficiency has decreased by only 35%

Electrically induced tunable cohesion in granular systems

Experimental observations of confined granular materials in the presence of an electric field that induces cohesive forces are reported. The angle of repose is found to increase with the cohesive force. A theoretical model for the stability of a granular heap, including both the effect of the sidewalls and cohesion is proposed. A good agreement between this model and the experimental results is found. The steady-state flow angle is practically unaffected by the electric field except for high field strengths and low flow rates.Comment: accepted for publication in "Journal of Statistical Mechanics: Theory and Experiment

Antibacterial properties of TiO2–Cu composite thin films grown by a one step DLICVD process

The correlations between microstructural features, chemical compositions and antibacterial properties of coatings containing metallic Cu particles embedded in a titanium dioxide matrix have been determined. A Direct Liquid Injection Chemical Vapor Deposition (DLICVD) processwas used for the one step growth of TiO2–Cu composite coatings on various substrates. Titanium tetra-iso-propoxide (TTIP) and copper bis(2,2,6,6-tetramethyl-3,5-heptationate) (Cu(tmhd)2) were used as titanium and copper molecular sources, respectively. This growth process allows a good control of the quantity of metalorganic precursors injected into the CVD reactor and thus of the coating composition. The deposition occurs at 683 K under low pressure (800 Pa). The influence of the main features of the coatings on their antibacterial properties was investigated in order to produce bactericidal surfaces that are durable, non-toxic and containing aminimumamount of active agent. The antibacterial activity on Staphylococcus aureus without any photon activation was measured according to the JIS Z 2801:2000 standard method. An antibacterial activity was detected for a low metal content of ca. 1 at.% Cu, and was found to increasewith the Cu content. It wasmaximal for 3.5 at.% Cu, i.e. TiO2–Cu composite coatings exhibit bactericidal behavior against S. aureus for this optimal composition (relative activity = 100%). In order to better characterize the microbiological behavior of the coatings more discriminating methods derived from the literature were tested to assess the performances of these CVD coatings in terms of efficiency, release of antibacterial agent and accelerated aging

18-month occurrence of severe events among early diagnosed HIV-infected children before antiretroviral therapy in Abidjan, Côte d'Ivoire: A cohort study

<p>Abstract</p> <p>Objective</p> <p>To assess the 18-month field effectiveness on severe events of a pediatric package combining early HIV-diagnosis and targeted cotrimoxazole prophylaxis in HIV-infected children from age six-week before the antiretroviral era, in Abidjan, Côte d'Ivoire.</p> <p>Methods</p> <p>Data from two consecutive prevention of HIV mother-to-child transmission programs were compared: the ANRS 1201/1202 Ditrame-Plus cohort (2001–2005) and the pooled data of the ANRS 049a Ditrame randomized trial and its following open-labeled cohort (1995–2000), used as a reference group. HIV-infected pregnant women ≥ 32–36 weeks of gestation were offered a short-course peri-partum antiretroviral prophylaxis (ZDV in Ditrame, and ZDV ± 3TC+single-dose (sd) NVP in Ditrame-Plus). Neonatal prophylaxis was provided in Ditrame-Plus only: 7-day ZDV and sdNVP 48–72 h after birth. A 6-week pediatric HIV-RNA diagnosis was provided on-line in the Ditrame-Plus while it was only oriented on clinical symptoms in Ditrame. Six-week HIV-infected children received a daily cotrimoxazole prophylaxis in Ditrame-Plus while no prophylaxis was provided in Ditrame. The determinants of severe events (death or hospitalization > 1 day) were assessed in a Cox regression model.</p> <p>Results</p> <p>Between 1995 and 2003, 98 out of the 1121 live-births were diagnosed as HIV-infected in peri-partum: 45 from Ditrame-Plus and 53 from Ditrame. The 18-month Kaplan-Meier cumulative probability of presenting a severe event was 66% in Ditrame-Plus (95% confidence interval [95%CI]: 50%–81%) and 77% in Ditrame (95%CI: 65%–89%), Log Rank test: p = 0.47. After adjustment on maternal WHO clinical stage, maternal death, 6-week pediatric viral load, birth-weight, and breastfeeding exposure, the 18-month risk of severe event was lower in Ditrame-Plus than in Ditrame (adjusted Hazard Ratio (aHR): 0.55, 95%CI: 0.3–1.1), although the difference was not statistically significant; p = 0.07). Maternal death was the only variable determinant of the occurrence of severe events in children (aHR: 3.73; CI: 2.2–11.2; p = 0.01).</p> <p>Conclusion</p> <p>Early cotrimoxazole from 6 weeks of age in HIV-infected infants seemed to reduce probability of severe events but the study lacked statistical power to prove this. Even with systematic cotrimoxazole prophylaxis, infant morbidity and mortality remained high pointing towards a need for early pediatric HIV-diagnosis and antiretroviral treatment in Africa.</p

Protein-Binding Microarray Analysis of Tumor Suppressor AP2α Target Gene Specificity

Cheap and massively parallel methods to assess the DNA-binding specificity of transcription factors are actively sought, given their prominent regulatory role in cellular processes and diseases. Here we evaluated the use of protein-binding microarrays (PBM) to probe the association of the tumor suppressor AP2α with 6000 human genomic DNA regulatory sequences. We show that the PBM provides accurate relative binding affinities when compared to quantitative surface plasmon resonance assays. A PBM-based study of human healthy and breast tumor tissue extracts allowed the identification of previously unknown AP2α target genes and it revealed genes whose direct or indirect interactions with AP2α are affected in the diseased tissues. AP2α binding and regulation was confirmed experimentally in human carcinoma cells for novel target genes involved in tumor progression and resistance to chemotherapeutics, providing a molecular interpretation of AP2α role in cancer chemoresistance. Overall, we conclude that this approach provides quantitative and accurate assays of the specificity and activity of tumor suppressor and oncogenic proteins in clinical samples, interfacing genomic and proteomic assays

Spread of Avian Influenza Viruses by Common Teal (Anas crecca) in Europe

Since the recent spread of highly pathogenic (HP) H5N1 subtypes, avian influenza virus (AIV) dispersal has become an increasing focus of research. As for any other bird-borne pathogen, dispersal of these viruses is related to local and migratory movements of their hosts. In this study, we investigated potential AIV spread by Common Teal (Anas crecca) from the Camargue area, in the South of France, across Europe. Based on bird-ring recoveries, local duck population sizes and prevalence of infection with these viruses, we built an individual-based spatially explicit model describing bird movements, both locally (between wintering areas) and at the flyway scale. We investigated the effects of viral excretion duration and inactivation rate in water by simulating AIV spread with varying values for these two parameters. The results indicate that an efficient AIV dispersal in space is possible only for excretion durations longer than 7 days. Virus inactivation rate in the environment appears as a key parameter in the model because it allows local persistence of AIV over several months, the interval between two migratory periods. Virus persistence in water thus represents an important component of contamination risk as ducks migrate along their flyway. Based on the present modelling exercise, we also argue that HP H5N1 AIV is unlikely to be efficiently spread by Common Teal dispersal only

Energy Resolution Performance of the CMS Electromagnetic Calorimeter

The energy resolution performance of the CMS lead tungstate crystal electromagnetic calorimeter is presented. Measurements were made with an electron beam using a fully equipped supermodule of the calorimeter barrel. Results are given both for electrons incident on the centre of crystals and for electrons distributed uniformly over the calorimeter surface. The electron energy is reconstructed in matrices of 3 times 3 or 5 times 5 crystals centred on the crystal containing the maximum energy. Corrections for variations in the shower containment are applied in the case of uniform incidence. The resolution measured is consistent with the design goals