Simulation of Flow of Mixtures Through Anisotropic Porous Media using a Lattice Boltzmann Model

We propose a description for transient penetration simulations of miscible and immiscible fluid mixtures into anisotropic porous media, using the lattice Boltzmann (LB) method. Our model incorporates hydrodynamic flow, diffusion, surface tension, and the possibility for global and local viscosity variations to consider various types of hardening fluids. The miscible mixture consists of two fluids, one governed by the hydrodynamic equations and one by diffusion equations. We validate our model on standard problems like Poiseuille flow, the collision of a drop with an impermeable, hydrophobic interface and the deformation of the fluid due to surface tension forces. To demonstrate the applicability to complex geometries, we simulate the invasion process of mixtures into wood spruce samples.Comment: Submitted to EPJ

Interlaminar fracture in woven carbon/epoxy laminates

This paper describes an experimental study developed to characterize the mode I and mode II fracture toughness of carbon/epoxy woven composites, using DCB and ENF tests, respectively. The laminates were manufactured using an epoxy resin and twelve woven balanced bi-directional layers of carbon fibres, all of them with the same orientation (0/90º). Significant instantaneous delaminations were observed particularly for the DCB specimen, which were responsible for an oscillatory behaviour of GI versus crack length. The maximum values obtained for GIC and GIIC were 281 and 1800 J/m2, respectively

Losses caused to wheat by root diseases and rizophagus insects, under four soil sanitary conditions

Em experimento conduzido no Centro Nacional de Pesquisa de Trigo, Empresa Brasileira de Pesquisa Agropecuária, em Passo Fundo, RS, no ano de 1982, determinou-se a ação das doenças radiculares, insetos rizófagos e brocas Listronotus bonariensis Kuschel, 1955 (Col., Curculionidae) na redução da emergência e na morte de plântulas e de afilhos em trigo. Utilizaram-se as cultivares de trigo Nobre e CNT 9 sob quatro condições sanitárias de solo. O uso de fungicidas proporcionou incrementos significativos quanto à emergência de plântulas até aos 32 dias, peso do hectolitro, peso de mil grãos, espigas por m2, espigas por planta, rendimento de grãos e reduziu o grau de infecção da podridão comum de raiz. A aplicação de inseticidas resultou em aumentos significativos em relação à testemunha, no número de espigas por m2, espigas por planta e no rendimento de grãos. A baixa densidade de espigas, observada no experimento, pode ser atribuída a fungos de solo e a insetos rizófagos e brocas.In an experiment conducted in 1982 at the Centro Nacional de Pesquisa de Trigo-Empresa Brasileira de Pesquisa Agropecuária (National Wheat Research Center of EMBRAPA), Passo Fundo, RS, Brazil, the action of root diseases, rhizophagus insects, and borers Listronotus bonariensis kuschel, 1955 (Col., Curcullonidae), in reducing emergence and in the death of wheat seedlings and tillers, was determined. Tow wheat cultivars, Nobre and CNT 9, under four soil sanitary conditions, were used. Fungicides provided significant increases as to seedling emergence up to 32 days, test weight, one thousand-grain weight, spikes per m2, spikes per plant, grain yield, and reduced infection level of common root rot. Insecticide application resulted in significant increases in number of spikes per m2, spikes per plant, and grain yield, as compared to the control. Low spike rate observed in the experiment may be attributed to soil borne fungi, rizophagus insects, and borers

An overview of jets and outflows in stellar mass black holes

In this book chapter, we will briefly review the current empirical understanding of the relation between accretion state and and outflows in accreting stellar mass black holes. The focus will be on the empirical connections between X-ray states and relativistic (`radio') jets, although we are now also able to draw accretion disc winds into the picture in a systematic way. We will furthermore consider the latest attempts to measure/order jet power, and to compare it to other (potentially) measurable quantities, most importantly black hole spin.Comment: Accepted for publication in Space Science Reviews. Also to appear in the Space Sciences Series of ISSI - The Physics of Accretion on to Black Holes (Springer Publisher

Resistência a Septoria lycopersici em espécies de Solanum (Secção Lycopersicon) e em progênies de S. lycopersicum × S. peruvianum

Septoria leaf spot (Septoria lycopersici) is one of the major fungal diseases of tomatoes (Solanum lycopersicum) in tropical and subtropical regions with humid climates and/or in areas cultivated under sprinkler irrigation systems. Sources of resistance have been found in accessions of Solanum (section Lycopersicon) species. However, many of the described sources are not effective under Brazilian conditions. The objective of this work was to evaluate wild and cultivated Solanum (section Lycopersicon) germplasm to S. lycopersici isolates. A collection of 124 accessions was initially evaluated under greenhouse conditions. Ten accessions were highly resistance (HR), whereas 33 were classified as having a resistant (R) response to S. lycopersici isolates. Field evaluation was also conducted with a sub-set of accessions identified as either HR or R in the greenhouse experiment. This field evaluation confirmed greenhouse tests and indicated the presence of some potential sources of rate-reducing resistance. One highly resistant and eight resistant S. habrochaites accessions were identified as being resistant under both conditions, confirming that this wild species is one of the most promising sources of resistance to S. lycopersici. Five new sources with high levels of resistance were found in S. peruvianum accessions (PI-306811, CNPH-1036, LA-1910, LA-1984 and LA-2744). One accession derived from an interspecific cross between S. lycopersicum and S. peruvianum was also found to be highly resistant and might be useful to introgress resistance factors from this wild species into cultivated tomato germplasm. However, additional breeding efforts will be necessary to introgress into the cultivated tomato the resistance factors identified in other S. peruvianum accessions due to the presence of natural crossing barriers between the two species.A mancha-de-septória (Septoria lycopersici) é importante doença fúngica do tomateiro (Solanum lycopersicum) em áreas tropicais e subtropicais com alta umidade ou quando esta hortaliça é cultivada sob irrigação por aspersão. Fontes de resistência têm sido encontradas em germoplasma de Solanum (secção Lycopersicon). No entanto, muitas das fontes descritas não funcionam nas condições brasileiras. Avaliou-se uma coleção de germoplasma de tomate cultivado e selvagem (Solanum secção Lycopersicon) visando identificar novas fontes de elevada resistência. Uma coleção de 124 acessos foi inicialmente avaliada sob condições de casa de vegetação. Somente dez acessos foram classificados como altamente resistentes e 33 foram classificados como resistentes. Um ensaio de campo foi também conduzido com um subconjunto de acessos promissores identificados no primeiro experimento. Foi confirmada a resposta da maioria dos acessos avaliados em casa de vegetação e indicou a presença de fontes de resistência capazes de reduzir a taxa de progresso da doença. Um acesso de S. habrochaites com elevada resistência e oito acessos resistentes foram identificados, confirmando que esta espécie representa uma das mais promissoras fontes de genes de resistência a S. lycopersici. Cinco novas fontes com elevados níveis de resistência foram identificadas em acessos da espécie S. peruvianum (PI-306811, CNPH-1036, LA-1910, LA-1984 e LA-2744). Um acesso, derivado de cruzamento interespecífico entre S. lycopersicum e S. peruvianum também mostrou-se altamente resistente e poderá ser útil na introgressão deste(s) gene(s) em germoplasma de tomateiro cultivado. No entanto, esforços adicionais de melhoramento serão necessários para transferir para o tomateiro cultivado os fatores de resistência identificados em outros acessos de S. peruvianum, uma vez que existem barreiras naturais de cruzamentos entre estas duas espécies

Accretion and ejection in black-hole X-ray transients

Aims: We summarize the current observational picture of the outbursts of black-hole X-ray transients (BHTs), based on the evolution traced in a hardness-luminosity diagram (HLD), and we offer a physical interpretation. Methods: The basic ingredient in our interpretation is the Poynting-Robertson Cosmic Battery (PRCB, Contopoulos & Kazanas 1998), which provides locally the poloidal magnetic field needed for the ejection of the jet. In addition, we make two assumptions, easily justifiable. The first is that the mass-accretion rate to the black hole in a BHT outburst has a generic bell-shaped form. This is guaranteed by the observational fact that all BHTs start their outburst and end it at the quiescent state. The second assumption is that at low accretion rates the accretion flow is geometrically thick, ADAF-like, while at high accretion rates it is geometrically thin. Results: Both, at the beginning and the end of an outburst, the PRCB establishes a strong poloidal magnetic field in the ADAF-like part of the accretion flow, and this explains naturally why a jet is always present in the right part of the HLD. In the left part of the HLD, the accretion flow is in the form of a thin disk, and such a disk cannot sustain a strong poloidal magnetic filed. Thus, no jet is expected in this part of the HLD. The counterclockwise traversal of the HLD is explained as follows: the poloidal magnetic field in the ADAF forces the flow to remain ADAF and the source to move upwards in the HLD rather than to turn left. Thus, the history of the system determines the counterclockwise traversal of the HLD. As a result, no BHT is expected to ever traverse the entire HLD curve in the clockwise direction. Conclusions: We offer a physical interpretation of accretion and ejection in BHTs with only one parameter, the mass transfer rate.Comment: Accepted for publication in A&

Vascular wilt of teak (Tectona grandis) caused by Fusarium oxysporum in Brazil

Commercial plantations of teak (Tectona grandis L.f.) are affected by many economically important fungal diseases under Brazilian conditions. Teak plants exhibiting distinctive vascular wilt symptoms were observed in Mirassol do Oeste (MT), Brazil. Trunk samples of the affected trees were collected, disinfected, and plated onto potato dextrose agar. Fungal cultures obtained displayed morphological characteristics typical of the Fusarium oxysporum species complex. A representative F. oxysporum isolate was used in pathogenicity assays. Teak plants displayed symptoms similar to those observed under field conditions approx. 60 d after root-dipping inoculation. Amplicons corresponding to segments of the translation elongation factor 1-α (TEF-1α) and RNA polymerase II second largest subunit (RPB2) genes were obtained using as template the genomic DNA extracted from two Fusarium isolates obtained from teak. Phylogenetic analyses of the amplicon sequences placed the isolates into the same cluster of isolates belonging to the F. oxysporum species complex. To our knowledge, this is the first report of vascular wilt of teak caused by F. oxysporum in the Neotropical region