2,322 research outputs found
Occupational balance: What tips the scales for new students?
The open question, ‘What prevents you from reaching occupational balance?’,
was posed within a questionnaire aimed at exploring the meanings of
occupation, health and wellbeing with a cohort of first-year occupational
therapy students during their initial few weeks at university. Their written
responses to the question about occupational balance were analysed and are
discussed in this paper. Not surprisingly, occupational balance appeared to be
achieved by only a few and more by chance than design.
People, time and money factors were identified as the main impediments
to achieving occupational balance, with psychological and emotional pressures
being at the forefront. Interestingly, despite these barriers, the overall
educational benefit of considering the occupational balance question in this
way raised the students’ awareness of its relationship to health and wellbeing.
This increased awareness might have longer-term health benefits, both
personally and professionally, which would be worthy of further research
Quantum Non-demolition Detection of Single Microwave Photons in a Circuit
Thorough control of quantum measurement is key to the development of quantum
information technologies. Many measurements are destructive, removing more
information from the system than they obtain. Quantum non-demolition (QND)
measurements allow repeated measurements that give the same eigenvalue. They
could be used for several quantum information processing tasks such as error
correction, preparation by measurement, and one-way quantum computing.
Achieving QND measurements of photons is especially challenging because the
detector must be completely transparent to the photons while still acquiring
information about them. Recent progress in manipulating microwave photons in
superconducting circuits has increased demand for a QND detector which operates
in the gigahertz frequency range. Here we demonstrate a QND detection scheme
which measures the number of photons inside a high quality-factor microwave
cavity on a chip. This scheme maps a photon number onto a qubit state in a
single-shot via qubit-photon logic gates. We verify the operation of the device
by analyzing the average correlations of repeated measurements, and show that
it is 90% QND. It differs from previously reported detectors because its
sensitivity is strongly selective to chosen photon number states. This scheme
could be used to monitor the state of a photon-based memory in a quantum
computer.Comment: 5 pages, 4 figures, includes supplementary materia
The role of the central stellar cluster in active galactic nuclei. I. Semi-analytical model
The subject of the paper is the role of the massive stellar cluster in the
activity phenomenon and in the structure of active galactic nuclei. We
introduce a simple model of stellar dynamics in the internal part of the
cluster, which allows us to include both the star-disk and the star-star
interactions. It is shown that the properties of the distribution of stars in
the vicinity of the black hole are determined both by the interaction of the
stars with the accretion disk and by the pair gravitational and contact
interaction between the stars. We calculate the distribution of stars in the
central parts of the cluster and we discuss possible effects of stellar
mass-loss due to the star-disk interaction. Finally, we study the implications
of the central cluster for active galactic nuclei activity. We model the broad
line region assuming that the gaseous wakes, following stars after each disk
crossing, play the role of the broad line region clouds, and we calculate the
corresponding line profiles. We also analyze the contribution of star-star and
star-disk collisions to active galactic nuclei variability.Comment: Accepted for publication in Astronomy and Astrophysic
Preparation and Measurement of Three-Qubit Entanglement in a Superconducting Circuit
Traditionally, quantum entanglement has played a central role in foundational
discussions of quantum mechanics. The measurement of correlations between
entangled particles can exhibit results at odds with classical behavior. These
discrepancies increase exponentially with the number of entangled particles.
When entanglement is extended from just two quantum bits (qubits) to three, the
incompatibilities between classical and quantum correlation properties can
change from a violation of inequalities involving statistical averages to sign
differences in deterministic observations. With the ample confirmation of
quantum mechanical predictions by experiments, entanglement has evolved from a
philosophical conundrum to a key resource for quantum-based technologies, like
quantum cryptography and computation. In particular, maximal entanglement of
more than two qubits is crucial to the implementation of quantum error
correction protocols. While entanglement of up to 3, 5, and 8 qubits has been
demonstrated among spins, photons, and ions, respectively, entanglement in
engineered solid-state systems has been limited to two qubits. Here, we
demonstrate three-qubit entanglement in a superconducting circuit, creating
Greenberger-Horne-Zeilinger (GHZ) states with fidelity of 88%, measured with
quantum state tomography. Several entanglement witnesses show violation of
bi-separable bounds by 830\pm80%. Our entangling sequence realizes the first
step of basic quantum error correction, namely the encoding of a logical qubit
into a manifold of GHZ-like states using a repetition code. The integration of
encoding, decoding and error-correcting steps in a feedback loop will be the
next milestone for quantum computing with integrated circuits.Comment: 7 pages, 4 figures, and Supplementary Information (4 figures)
The Amidase Domain of Lipoamidase Specifically Inactivates Lipoylated Proteins In Vivo
BACKGROUND:In the 1950s, Reed and coworkers discovered an enzyme activity in Streptococcus faecalis (Enterococcus faecalis) extracts that inactivated the Escherichia. coli and E. faecalis pyruvate dehydrogenase complexes through cleavage of the lipoamide bond. The enzyme that caused this lipoamidase activity remained unidentified until Jiang and Cronan discovered the gene encoding lipoamidase (Lpa) through the screening of an expression library. Subsequent cloning and characterization of the recombinant enzyme revealed that lipoamidase is an 80 kDa protein composed of an amidase domain containing a classic Ser-Ser-Lys catalytic triad and a carboxy-terminal domain of unknown function. Here, we show that the amidase domain can be used as an in vivo probe which specifically inactivates lipoylated enzymes. METHODOLOGY/PRINCIPAL FINDINGS:We evaluated whether Lpa could function as an inducible probe of alpha-ketoacid dehydrogenase inactivation using E. coli as a model system. Lpa expression resulted in cleavage of lipoic acid from the three lipoylated proteins expressed in E. coli, but did not result in cleavage of biotin from the sole biotinylated protein, the biotin carboxyl carrier protein. When expressed in lipoylation deficient E. coli, Lpa is not toxic, indicating that Lpa does not interfere with any other critical metabolic pathways. When truncated to the amidase domain, Lpa retained lipoamidase activity without acquiring biotinidase activity, indicating that the carboxy-terminal domain is not essential for substrate recognition or function. Substitution of any of the three catalytic triad amino acids with alanine produced inactive Lpa proteins. CONCLUSIONS/SIGNIFICANCE:The enzyme lipoamidase is active against a broad range of lipoylated proteins in vivo, but does not affect the growth of lipoylation deficient E. coli. Lpa can be truncated to 60% of its original size with only a partial loss of activity, resulting in a smaller probe that can be used to study the effects of alpha-ketoacid dehydrogenase inactivation in vivo
Laser-based Additive Manufacturing of Bulk Metallic Glasses: Recent Advances and Future Perspectives for Biomedical Applications
Bulk metallic glasses (BMGs) are non-crystalline class of advanced materials and have found potential applications in the biomedical field. Although there are numerous conventional manufacturing approaches for processing BMGs, the most commonly used like copper-mould casting have some limitations. It is not easy to manage and control the critical cooling rate, especially when the fabrication of complex BMG geometries is involved. Other limitations of these techniques include the size constraints, non-flexibility, and the tooling and accessories are costly. The emergence of additive manufacturing (AM) has opened another promising manufacturing route for processing BMGs. AM processes, particularly laser powder-bed fusion (PBF-LB/M) builds parts layer-by-layer and successively fused the powder-melted feedstocks using prescribed computer-controlled laser scanner system, thereby forming a BMGs part upon sufficiently rapid cooling to ensure the glass forming-ability. PBF-LB/M overcomes the limitations of the pre-existing BMGs processing techniques by not only improving the part size, but also produces exceptionally complex structures and patient-specific implants. This review article aims to summarise and discuss the mechanism of BMGs formation through PBF-LB/M for biomedical applications and to highlight the current scientific and technological challenges as well as the future research perspectives towards overcoming the pore-mediated microcracks, partial crystallisation, brittleness and BMG size constraint
Hypertrophic pyloric stenosis: tips and tricks for ultrasound diagnosis
We describe a systematic approach to the ultrasound (US) examination of the antropyloric region in children. US is the modality of choice for the diagnosis of hypertrophic pyloric stenosis (HPS). The imaging features of the normal pylorus and the diagnostic findings in HPS are reviewed and illustrated in this pictorial essay. Common difficulties in performing the examination and tips to help overcome them will also be discussed
Stabilizing entanglement autonomously between two superconducting qubits
Quantum error-correction codes would protect an arbitrary state of a
multi-qubit register against decoherence-induced errors, but their
implementation is an outstanding challenge for the development of large-scale
quantum computers. A first step is to stabilize a non-equilibrium state of a
simple quantum system such as a qubit or a cavity mode in the presence of
decoherence. Several groups have recently accomplished this goal using
measurement-based feedback schemes. A next step is to prepare and stabilize a
state of a composite system. Here we demonstrate the stabilization of an
entangled Bell state of a quantum register of two superconducting qubits for an
arbitrary time. Our result is achieved by an autonomous feedback scheme which
combines continuous drives along with a specifically engineered coupling
between the two-qubit register and a dissipative reservoir. Similar autonomous
feedback techniques have recently been used for qubit reset and the
stabilization of a single qubit state, as well as for creating and stabilizing
states of multipartite quantum systems. Unlike conventional, measurement-based
schemes, an autonomous approach counter-intuitively uses engineered dissipation
to fight decoherence, obviating the need for a complicated external feedback
loop to correct errors, simplifying implementation. Instead the feedback loop
is built into the Hamiltonian such that the steady state of the system in the
presence of drives and dissipation is a Bell state, an essential building-block
state for quantum information processing. Such autonomous schemes, broadly
applicable to a variety of physical systems as demonstrated by a concurrent
publication with trapped ion qubits, will be an essential tool for the
implementation of quantum-error correction.Comment: 39 pages, 7 figure
Delocalized single-photon Dicke states and the Leggett- Garg inequality in solid state systems
We show how to realize a single-photon Dicke state in a large one-dimensional
array of two- level systems, and discuss how to test its quantum properties.
Realization of single-photon Dicke states relies on the cooperative nature of
the interaction between a field reservoir and an array of two-level-emitters.
The resulting dynamics of the delocalized state can display Rabi-like
oscillations when the number of two-level emitters exceeds several hundred. In
this case the large array of emitters is essentially behaving like a
mirror-less cavity. We outline how this might be realized using a
multiple-quantum-well structure and discuss how the quantum nature of these
oscillations could be tested with the Leggett-Garg inequality and its
extensions.Comment: 29 pages, 5 figures, journal pape
- …