Evaluation of super-heated steam vacuum drying viability and development of a predictive drying model for four Australian hardwood species.

The results of drying trials show that vacuum drying produces material of the same or better quality than is currently being produced by conventional methods within 41 to 66 % of the drying time, depending on the species. Economic analysis indicates positive or negative results depending on the species and the size of drying operation. Definite economic benefits exist by vacuum drying over conventional drying for all operation sizes, in terms of drying quality, time and economic viability, for E. marginata and E. pilularis. The same applies for vacuum drying C. citriodora and E. obliqua in larger drying operations (kiln capacity 50 m3 or above), but not for smaller operations at this stage. Further schedule refinement has the ability to reduce drying times further and may improve the vacuum drying viability of the latter species in smaller operations

Mass transfer properties of Acacia mangium plantation wood

This study investigated the mass transfer properties (permeability and mass diffusivity) in the longitudinal, radial and tangential directions of plantation-grown Acacia mangium in VinhPhuc province,northeast, Vietnam. These properties will be used to complement a conventional drying model in the future. Measurements of gas and liquid permeability were performed using a Porometer (POROLUXTM1000). Mass diffusivity was determined in a constant humidity and temperature chamber using PVC-CHA vaporimeters. Results showed the gas permeability was significant higher than liquid with the descending order of longitudinal, radial, and tangential directions. The permeability anisotropy ratios from the longitudinal to transverse directions of Acacia mangium were much lower than other published species. However, the obvious anisotropy ratios from radial to tangential for both permeability and diffusivity, is one of concerns as they can exacerbate defects during drying. Besides, the high permeability and diffusivity of Acaciamangium compared to some other species reported compounds its relatively fast drying rate

Mass transfer properties of Acacia mangium plantation wood

This study investigated the mass transfer properties (permeability and mass diffusivity) in the longitudinal, radial and tangential directions of plantation-grown Acacia mangium in VinhPhuc province,northeast, Vietnam. These properties will be used to complement a conventional drying model in the future. Measurements of gas and liquid permeability were performed using a Porometer (POROLUXTM1000). Mass diffusivity was determined in a constant humidity and temperature chamber using PVC-CHA vaporimeters. Results showed the gas permeability was significant higher than liquid with the descending order of longitudinal, radial, and tangential directions. The permeability anisotropy ratios from the longitudinal to transverse directions of Acacia mangium were much lower than other published species. However, the obvious anisotropy ratios from radial to tangential for both permeability and diffusivity, is one of concerns as they can exacerbate defects during drying. Besides, the high permeability and diffusivity of Acaciamangium compared to some other species reported compounds its relatively fast drying rate

СОСТОЯНИЕ И ПЕРСПЕКТИВЫ ПРОМЫШЛЕННОГО ПТИЦЕВОДСТВА РЕСПУБЛИКИ БЕЛАРУСЬ

Glue laminated timber is currently manufactured using classical adhesives such as resorcinol formaldehyde and phenol resorcinol formaldehyde. These are proven structural adhesives; however their long cure times and rising costs are creating opportunities for newer technology adhesives. One such class are the structural polyurethanes with decreased spread rates and faster curing times. Their limitation lies in their inability to adhere timbers of densities exceeding 800 kg/m(3). When used on species including the southern pines (Pinus spp.) with a high frequency of latewood, they delaminate after accelerated weathering tests due to stresses imposed on the glue line during the drying process. Surface incision has been trialed in this study to increase the penetration of polyurethane adhesives and reduce glue line stresses. The study shows that incisions to a depth of 2 mm decreases delamination when compared to matched samples with no incisions. The significant increase in glue line surface area may result in stress reduction as the more compliant adhesive may distribute the stresses better across the glue line. Furthermore, microscopic analysis suggests that the incisions are reducing glue line stress through crack propagation into the timber pointing to the possibility of increased timber compliance at the glue line

The Habitable-Zone Planet Finder: A Stabilized Fiber-Fed NIR Spectrograph for the Hobby-Eberly Telescope

We present the scientific motivation and conceptual design for the recently funded Habitable-zone Planet Finder (HPF), a stabilized fiber-fed near-infrared (NIR) spectrograph for the 10 meter class Hobby-Eberly Telescope (HET) that will be capable of discovering low mass planets around M dwarfs. The HPF will cover the NIR Y & J bands to enable precise radial velocities to be obtained on mid M dwarfs, and enable the detection of low mass planets around these stars. The conceptual design is comprised of a cryostat cooled to 200K, a dual fiber-feed with a science and calibration fiber, a gold coated mosaic echelle grating, and a Teledyne Hawaii-2RG (H2RG) NIR detector with a 1.7$\mu$m cutoff. A uranium-neon hollow-cathode lamp is the baseline wavelength calibration source, and we are actively testing laser frequency combs to enable even higher radial velocity precision. We will present the overall instrument system design and integration with the HET, and discuss major system challenges, key choices, and ongoing research and development projects to mitigate risk. We also discuss the ongoing process of target selection for the HPF survey.Comment: 14 pages, 9 figures. To appear in the proceedings of the SPIE 2012 Astronomical Instrumentation and Telescopes conferenc

An Infrared through Radio Study of the Properties and Evolution of IRDC Clumps

We examine the physical properties and evolutionary stages of a sample of 17 clumps within 8 Infrared Dark Clouds (IRDCs) by combining existing infrared, millimeter, and radio data with new Bolocam Galactic Plane Survey (BGPS) 1.1 mm data, VLA radio continuum data, and HHT dense gas (HCO+ and N2H+) spectroscopic data. We combine literature studies of star formation tracers and dust temperatures within IRDCs with our search for ultra-compact (UC) HII regions to discuss a possible evolutionary sequence for IRDC clumps. In addition, we perform an analysis of mass tracers in IRDCs and find that 8 micron extinction masses and 1.1 mm Bolocam Galactic Plane Survey (BGPS) masses are complementary mass tracers in IRDCs except for the most active clumps (notably those containing UCHII regions), for which both mass tracers suffer biases. We find that the measured virial masses in IRDC clumps are uniformly higher than the measured dust continuum masses on the scale of ~1 pc. We use 13CO, HCO+, and N2H+ to study the molecular gas properties of IRDCs and do not see any evidence of chemical differentiation between hot and cold clumps on the scale of ~1 pc. However, both HCO+ and N2H+ are brighter in active clumps, due to an increase in temperature and/or density. We report the identification of four UCHII regions embedded within IRDC clumps and find that UCHII regions are associated with bright (>1 Jy) 24 micron point sources, and that the brightest UCHII regions are associated with "diffuse red clumps" (an extended enhancement at 8 micron). The broad stages of the discussed evolutionary sequence (from a quiescent clump to an embedded HII region) are supported by literature dust temperature estimates; however, no sequential nature can be inferred between the individual star formation tracers.Comment: 33 pages, 26 figures, 6 tables, accepted for publication in ApJ. Full resolution version available here: http://casa.colorado.edu/~battersb/Publications.htm

Response to The Department of the Prime Minister and Cabinet's discussion paper "Connecting with Confidence"

The ACS has prepared this response to the discussion paper to assist with the design of the cyber whitepaper expected in 2012. The ACS also welcomes the opportunity to promote discussion and support of our digital economy to position Australia for the future. Drawing from its membership of ICT professionals, and academics - particularly in areas of cyber resilience and security - the ACS established a Cyber Taskforce for this purpose. The ACS recommends: greater focus on education - noting that ICT education in primary and secondary schooling is essential - to developing ICT skills of the future and that school level educational activity forms the base on which appropriate tertiary level education programs can function for the education and training of ICT professionals; greater assistance to small and medium sized business as this is the engine room of the Australian economy; policy coordination on trusted identities; better coordination of cyber related education and research; providing consumers and businesses with resources directed to the everyday real-life challenges they face; global Internet governance changes designed to underpin and deliver trustworthy people, processes and systems including, where appropriate, a legislated mandatory baseline of trustworthiness attributes analogous to the non-excludable warranties implied in consumer contacts

The genome and transcriptome of Haemonchus contortus, a key model parasite for drug and vaccine discovery

<p>Background: The small ruminant parasite Haemonchus contortus is the most widely used parasitic nematode in drug discovery, vaccine development and anthelmintic resistance research. Its remarkable propensity to develop resistance threatens the viability of the sheep industry in many regions of the world and provides a cautionary example of the effect of mass drug administration to control parasitic nematodes. Its phylogenetic position makes it particularly well placed for comparison with the free-living nematode Caenorhabditis elegans and the most economically important parasites of livestock and humans.</p> <p>Results: Here we report the detailed analysis of a draft genome assembly and extensive transcriptomic dataset for H. contortus. This represents the first genome to be published for a strongylid nematode and the most extensive transcriptomic dataset for any parasitic nematode reported to date. We show a general pattern of conservation of genome structure and gene content between H. contortus and C. elegans, but also a dramatic expansion of important parasite gene families. We identify genes involved in parasite-specific pathways such as blood feeding, neurological function, and drug metabolism. In particular, we describe complete gene repertoires for known drug target families, providing the most comprehensive understanding yet of the action of several important anthelmintics. Also, we identify a set of genes enriched in the parasitic stages of the lifecycle and the parasite gut that provide a rich source of vaccine and drug target candidates.</p> <p>Conclusions: The H. contortus genome and transcriptome provides an essential platform for postgenomic research in this and other important strongylid parasites. </p&gt

Alignment and Testing of Critical Interface Fixtures for the James Webb Space Telescope

NASAs James Webb Space Telescope (JWST) is a 6.6m diameter, segmented, deployable telescope for cryogenic IR space astronomy. The JWST Observatory architecture includes the Primary Mirror Backplane Support Structure (PMBSS) and Integrated Science Instrument Module (ISIM) Electronics Compartment (IEC) which is designed to integrate to the spacecraft bus via six cupcone interfaces. Prior to integration to the spacecraft bus the JWST observatory must undergo environmental testing, handling, and transportation. Multiple fixtures were developed to support these tasks including the vibration fixture and handling and integration fixture (HIF). This work reports on the development of the nominal alignment of the six interfaces and metrology operations performed for the JWST observatory to safely integrate them for successful environmental testing