Identifying and abating copper foil impurities to optimize graphene growth

Copper foil impurities are hampering scalable production of high-quality graphene by chemical vapor deposition (CVD). Here, we conduct a thorough study on the origin of these unavoidable contaminations at the surface of copper after the CVD process. We identify two distinct origins for the impurities. The first type is intrinsic impurities, originating from the manufacturing process of the copper foils, already present at the surface before any high-temperature treatment, or buried into the bulk of copper foils. The buried impurities diffuse towards the copper surface during high-temperature treatment and precipitate. The second source is external: silica contamination arising from the quartz tube that also precipitate on copper. The problem of the extrinsic silica contamination is readily solved upon using an adequate confinement the copper foil samples. The intrinsic impurities are much more difficult to remove since they appear spread in the whole foil. Nevertheless, electropolishing proves particularly efficient in drastically reducing the issue.Comment: 26 pages, 12 figure

Graphene-coated holey metal films: tunable molecular sensing by surface plasmon resonance

We report on the enhancement of surface plasmon resonances in a holey bidimensional grating of subwavelength size, drilled in a gold thin film coated by a graphene sheet. The enhancement originates from the coupling between charge carriers in graphene and gold surface plasmons. The main plasmon resonance peak is located around 1.5 microns. A lower constraint on the gold-induced doping concentration of graphene is specified and the interest of this architecture for molecular sensing is also highlighted.Comment: 5 pages, 4 figures, Final version. Published in Applied Physics Letter

FOUCAULT, Michel, Histoire de la sexualité. Tome I. La volonté du savoir

The interest of using polyimide as a sacrificial and anchoring layer is demonstrated for post-processing surface micromachining and for the incorporation of metallic nanowires into microsystems. In addition to properties like a high planarization factor, a good resistance to most non-oxidizing acids and bases, and CMOS compatibility, polyimide can also be used as a mold for nanostructures after ion track-etching. Moreover, specific polyimide grades, such as PI-2611 from HD Microsystems™, involve a thermal expansion coefficient similar to silicon and low internal stress. The process developed in this study permits higher gaps compared to the state-of-the-art, limits stiction problems with the substrate and is adapted to various top-layer materials. Most metals, semiconductors or ceramics will not be affected by the oxygen plasma required for polyimide etching. Released structures with vertical gaps from one to several tens of μm have been obtained, possibly using multiple layers of polyimide. Furthermore, patterned freestanding nanowires have been synthesized with diameters from 20 to 60 nm and up to 3 μm in length. These results have been applied to the fabrication of two specific devices: a generic nanomechanical testing lab-on-chip platform and a miniaturized ionization sensor

Toward an experimental proof of superhydrophobicity enhanced by quantum fluctuations freezing on a broadband-absorber metamaterial

Previous theoretical works suggested that superhydrophobicity could be enhanced through partial inhibition of the quantum vacuum modes at the surface of a broadband-absorber metamaterial which acts in the extreme ultraviolet frequency domain. This effect would then compete with the classical Cassie-Baxter interpretation of superhydrophobicity. In this article, we first theoretically establish the expected phenomenological features related to such a kind of "quantum" superhydrophobicity. Then, relying on this theoretical framework, we experimentally study patterned silicon surfaces on which organosilane molecules were grafted, all the coated surfaces having similar characteristic pattern sizes but different profiles. Some of these surfaces can indeed freeze quantum photon modes while others cannot. While the latter ones allow hydrophobicity, only the former ones allow for superhydrophobicity. We believe these results lay the groundwork for further complete assessment of superhydrophobicity induced by quantum fluctuations freezing.Comment: 10 pages, 5 figures, final version, accepted for publication in Journal of Applied Physic

Schottky barrier lowering with the formation of crystalline Er silicide on n-Si upon thermal annealing

The evolution of the Schottky barrier height (SBH) of Er silicide contacts to n-Si is investigated as a function of the annealing temperature. The SBH is found to drop substantially from 0.43 eV for the as-deposited sample to reach 0.28 eV, its lowest value, at 450 C. By x-ray diffraction, high resolution transmission electron microscopy, and x-ray photoelectron spectroscopy, the decrease in the SBH is shown to be associated with the progressive formation of crystalline ErSi2-x

Enhanced Light–Matter Interactions in Graphene-Covered Gold Nanovoid Arrays

The combination of graphene with noble-metal nanostructures is currently being explored for strong light-graphene interaction enhanced by plasmons. We introduce a novel hybrid graphene-metal system for studying light-matter interactions with gold-void nanostructures exhibiting resonances in the visible range. Strong coupling of graphene layers to the plasmon modes of the nanovoid arrays results in significant frequency shifts of the underlying plasmon resonances, enabling more than 30% absolute light absorption in a single layer of graphene and up to 700-fold enhancement of the Raman response of the graphene. These new perspectives enable us to verify the presence of graphene on gold-void arrays and the enhancement even allows us to accurately quantify the number of layers. Experimental observations are further supported by numerical simulations and perturbation-theory analysis. The graphene gold-void platform is beneficial for sensing of molecules and placing R6G dye molecules on top of the graphene, we observe a strong enhancement of the R6G Raman fingerprints. These results pave the way toward advanced substrates for surface-enhanced Raman scattering (SERS) with potential for unambiguous single-molecule detection on the atomically well-defined layer of graphene.Comment: 17 pages including 5 figure

Evidence from site-directed mutagenesis that the cytoplasmic domain of the beta3 subunit influences the conformational state of the alphaVbeta3 integrin ectodomain.

In order to explore the mechanisms leading to conformational changes of the vitronectin receptor alphavbeta3 following ligand or divalent cation binding, we have investigated the expression of epitopes known as ligand-induced binding sites (LIBS) on beta3 cytoplasmic tail mutants expressed in CHO cells. Truncation of the entire beta3 cytoplasmic domain induced constitutive LIBS exposure on alphavbeta3 and alphaIIbeta3. Deletion of the C-terminal NITY759 sequence or disruption of the NPLY747 motif by a Y747A substitution impaired extracellular conformational changes on alphavbeta3 following RGDS, echistatin or Mn2+ binding, whereas the substitutions Y747F, Y759A or Y759F allowed normal LIBS exposure. Furthermore, metabolic energy depletion totally prevented Mn2+-dependent LIBS exposure, but had only a minor effect on RGDS-induced conformational changes. Our results demonstrate that the structural integrity of the NPLY747 motif in the beta3 cytoplasmic domain, rather than potential phosphorylation of Tyr747 or Tyr759, is a prerequisite for conformational changes within the alphavbeta3 ectodomain, and suggest that two different mechanisms are responsible for RGDS- and Mn2+-dependent conformational changes

Distinct involvement of beta3 integrin cytoplasmic domain tyrosine residues 747 and 759 in integrin-mediated cytoskeletal assembly and phosphotyrosine signaling.

We have investigated the structural requirements of the beta3 integrin subunit cytoplasmic domain necessary for tyrosine phosphorylation of focal adhesion kinase (FAK) and paxillin during alphav beta3-mediated cell spreading. Using CHO cells transfected with various beta3 mutants, we demonstrate a close correlation between alphav beta3-mediated cell spreading and tyrosine phosphorylation of FAK and paxillin, and highlight a distinct involvement of the NPLY747 and NITY759 motifs in these signaling processes. Deletion of the NITY759 motif alone was sufficient to completely prevent alphav beta3-dependent focal contact formation, cell spreading, and FAK/paxillin phosphorylation. The single Y759A substitution induced a strong inhibitory phenotype, while the more conservative, but still phosphorylation-defective, Y759F mutation restored wild type receptor function. Alanine substitution of the highly conserved Tyr747 completely abolished alphav beta3-dependent formation of focal adhesion plaques, cell spreading, and FAK/paxillin phosphorylation, whereas a Y747F substitution only partially restored these events. As none of these mutations affected receptor-ligand interaction, our results suggest that the structural integrity of the NITY759 motif, rather than the phosphorylation status of Tyr759 is important for beta3-mediated cytoskeleton reorganization and tyrosine phosphorylation of FAK and paxillin, while the presence of Tyr at residue 747 within the NPLY747 motif is required for optimal beta3 post-ligand binding events