28,080 research outputs found
An Exploratory Modeling of The Decision Process of New Product Selection by Supermarket Buyers
Consumer/Household Economics, Food Consumption/Nutrition/Food Safety,
The Strategic Role of Supermarket Buyer Intermediaries in New Product Selection: Implications for Systemwide Efficiency
Agribusiness,
Theoretical studies of tone noise from a fan rotor
An analytical study was made of some possible rotor alone noise sources of dipole, quadrapole and monopole characters which generate discrete tone noise. Particular emphasis is given to the tone noise caused by fan inlet flow distortion and turbulence. Analytical models are developed to allow prediction of absolute levels. Experimental data measured on a small scale fan is presented which indicates inlet turbulence interaction with a fan rotor can be a source of tone noise. Predicted and measured tone noise for the small scale rotor are shown to be in reasonable agreement
The Structure and C=C Vibrational Frequencies of the all- trans Polyenes C2nH2n+2(n=2-15), C2nH2n(Me)2(n=2-13), and C2nH2n(tert-Butyl)2(n=2-5): Computational Results
Carbon-carbon bond lengths and C=C vibrational frequencies are reported for the linear, all-trans unsubstituted C2nH2n+2 (n=2-15), methyl capped C2nH2nMe2 (n=2-13), and tert-butyl capped C2nH2n(tert-butyl)2 (n=2-5) polyenes (C2h) calculated at the B3LYP/6-311++G(d,p) level. The C=C/C-C bond length alternation remains evident at this level for the unsubstituted and methyl capped polyenes as the chain length increases; the center-most difference in the length of the C-C/C=C bonds is ~0.06 Å for C30H32 and C26H26Me2. The Ag, in-phase, harmonic C=C Raman frequency for the unsubstituted polyenes decreases from 1699.2 cm-1 (n = 2) to 1528.9 cm-1 (n=15); the anharmonic frequency decreases from 1651.5 cm-1 (n = 2) to 1547.7 cm-1 (n = 8). The harmonic C=C frequency for the methyl capped polyenes decreases from 1717.9 cm-1 (n = 2) to 1539.6 cm- 1 (n= 13), and the anharmonic C=C frequency decreases from 1675.0 cm-1 (n = 2) to 1562.8 cm-1 (n = 7)
The solar wind velocity and its correlation with geomagnetic, solar and cosmic ray activity
Correlation of plasma velocity with indices of solar and terrestrial activity - cosmic radiatio
Two Modes of Solid State Nucleation - Ferrites, Martensites and Isothermal Transformation Curves
When a crystalline solid such as iron is cooled across a structural
transition, its final microstructure depends sensitively on the cooling rate.
For instance, an adiabatic cooling across the transition results in an
equilibrium `ferrite', while a rapid cooling gives rise to a metastable twinned
`martensite'. There exists no theoretical framework to understand the dynamics
and conditions under which both these microstructures obtain. Existing theories
of martensite dynamics describe this transformation in terms of elastic strain,
without any explanation for the occurence of the ferrite. Here we provide
evidence for the crucial role played by non-elastic variables, {\it viz.},
dynamically generated interfacial defects. A molecular dynamics (MD) simulation
of a model 2-dimensional (2d) solid-state transformation reveals two distinct
modes of nucleation depending on the temperature of quench. At high
temperatures, defects generated at the nucleation front relax quickly giving
rise to an isotropically growing `ferrite'. At low temperatures, the defects
relax extremely slowly, forcing a coordinated motion of atoms along specific
directions. This results in a twinned critical nucleus which grows rapidly at
speeds comparable to that of sound. Based on our MD results, we propose a
solid-state nucleation theory involving the elastic strain and non-elastic
defects, which successfully describes the transformation to both a ferrite and
a martensite. Our work provides useful insights on how to formulate a general
dynamics of solid state transformations.Comment: 3 pages, 4 B/W + 2 color figure
Some experiences with the viscous-inviscid interaction approach
Methods for simulating compressible viscous flow using the viscid-inviscid interaction approach are described. The formulations presented range from the more familiar full-potential/boundary-layer interaction schemes to a method for coupling Euler/Navier-Stokes and boundary-layer algorithms. An effort is made to describe the advantages and disadvantages of each formulation. Sample results are presented which illustrate the applicability of the methods
A feasibility assessment of magnetic bearings for free-piston Stirling space power converters
This report describes a design and analysis study performed by Mechanical Technology Incorporated (MTI) under NASA Contract NAS3-26061. The objective of the study was to assess the feasibility and efficacy of applying magnetic bearings to free-piston Stirling-cycle power conversion machinery of the type currently being evaluated for possible use in long-term space missions. The study was performed for a 50-kWe Reference Stirling Space Power Converter (RSSPC) system consisting of two 25-kWe free-piston Stirling engine modules. Two different versions of the RSSPC engine modules have been defined under NASA Contract NAS3-25463. These modules currently use hydrostatic gas bearings to support the reciprocating displacer and power piston assemblies. Results of this study show that active magnetic bearings of the attractive electromagnetic type are technically feasible for RSSPC application provided that wire insulation with 60,000-hr life capability at 300 C can be developed for the bearing coils. From a design integration standpoint, both versions of the RSSPC were found to be conceptually amenable to magnetic support of the power piston assembly. However, only one version of the RSSPC was found to be amendable to magnetic support of the displacer assembly. Unacceptable changes to the basic engine design would be required to incorporate magnetic displacer bearings into the second version. Complete magnetic suspension of the RSSPC can potentially increase overall efficiency of the Stirling cycle power converter by 0.53 to 1.4 percent (0.15 to 0.4 efficiency points). Magnetic bearings will also overcome several operational concerns associated with hydrostatic gas bearing systems. However, these advantages are accompanied by a 5 to 8 percent increase in specific mass of the RSSPC, depending on the RSSPC version employed. Additionally, magnetic bearings are much more complex, both mechanically and particularly electronically, than hydrostatic bearings. Accordingly, long-term stability and reliability represent areas of uncertainty for magnetic bearings. Considerable development effort will be required to establish the long-term suitability of these bearings for Stirling space power applications
Theoretical studies on tone noise from a ducted fan rotor
The method of computing radiated noise from a ducted rotor due to inflow distortion and turbulence are examined. Analytical investigations include an appropriate description of sources, the cut-off conditions imposed on the modal propagation of the pressure waves in the annular duct, and reflections at the upstream end of the duct. Far field sound pressure levels at blade passing frequency due to acoustic radiation from a small scale low speed fan are computed. Theoretical predictions are in reasonable agreement with experimental measurements
Recommended from our members
R-PEKS: RBAC Enabled PEKS for Secure Access of Cloud Data
In the recent past, few works have been done by combining attribute-based access control with multi-user PEKS, i.e., public key encryption with keyword search. Such attribute enabled searchable encryption is most suitable for applications where the changing of privileges is done once in a while. However, to date, no efficient and secure scheme is available in the literature that is suitable for these applications where changing privileges are done frequently. In this paper our contributions are twofold. Firstly, we propose a new PEKS scheme for string search, which, unlike the previous constructions, is free from bi-linear mapping and is efficient by 97% compared to PEKS for string search proposed by Ray et.al in TrustCom 2017. Secondly, we introduce role based access control (RBAC) to multi-user PEKS, where an arbitrary group of users can search and access the encrypted files depending upon roles. We termed this integrated scheme as R-PEKS. The efficiency of R-PEKS over the PEKS scheme is up to 90%. We provide formal security proofs for the different components of R-PEKS and validate these schemes using a commercial dataset
- …